Philips Mcd388 User Manual

12
For DVD/DivX video, select an audio  •
language.
mSUBTITLE
Select a subtitle language. •
nG OTO  
During disc play, specify a position to  •
star t play.
oANGLE/PROG 
Select a DVD camera angle. •
Program tracks. •
Program titles/chapters for DVD play. •
Program radio stations. •
pNumeric keypad 
Select a title/chapter/track directly. •
qSURROUND 
Enable/disable Dolby Vir tual Speakers  •
(DVS) sound effect.
r
/
Skip to the previous/next track. •
Skip to the previous/next title or  •
chapter.
Select a...

13
Connect TV
Connect video cables
With this connection, you can watch video from 
the unit on the TV screen.
You can select the best video connection that 
your TV  suppor ts.
Option 1: Connect through HDMI  •
(for a HDMI, DVI or HDCP-compliant 
TV).
Option 2: Connect through SCART  •
(for a standard TV).
Option 3: connect through  •
component video (for a standard TV 
or Progressive Scan TV).
Option 4: connect through S-Video  •
(for a standard TV).
Option 5: connect through composite  •
video (CVBS)...

14
1  Connect component video cables (red/
blue/green - not supplied) to:
the •COMPONENT VIDEO OUT (Pr/
Cr Pb/Cb Y) sockets on this unit.
the component input sockets on the  •
TV.
Option 3: Connect through S-Video
1  Connect an S-video cable (not supplied) 
to:
the •S-Video socket on this unit.
the S-Video input socket on the TV. •
TVPr/Cr         Pb/Cb         Y 
COMPONENT VIDEO IN PUT
TV
S-VIDEO IN
Connect HDMI (High Defi nition Multimedia 
Interface), DVI (Digital Visual Interface), or 
HDCP...

15
Connect FM antenna
Tip
This unit does not suppor t MW radio reception.•
1  Connect the supplied FM antenna to the 
FM AERIAL socket on the unit.
Connect power
Caution
Risk of product damage! Ensure that the power supply •
voltage corresponds to the voltage printed on the back 
or the underside of the unit.
Risk of electric shock! When you unplug the AC power, 
•
always pull the plug from the socket. Never pull the 
cord.
Before you connect the AC power, ensure you have 
•
completed all other...

16
3  Place the main unit on a hard, fl at and 
stable surface.
Tip
•You can also mount the unit on a wall .
2  Switch the voltage selector at the bottom 
of the digital wireless subwoofer to the 
local power line voltage.
3  Connect the power plug of the subwoofer 
to the wall outlet.
Place the unit
1
  Attach the rear cover.
2  Attach the supplied table stand to the 
bottom of the main unit.
EN
 

17
Note
Before you press any function button on the remote •
control, fi rst select the correct source with the remote 
control instead of the main unit.
If you are not going to use the remote control for a 
•
long time, remove the batter y.
Set clock
1
  In the standby mode, press and hold 
CLOCK on the front panel to activate the 
clock setting mode.
The hour digits are displayed and begin  »
to blink.
2 Press  + VOL  - to set the hour.
The minute digits are displayed and  »
begin to blink.
3 Press  +...

18
Tip
The video-in channel is between the lowest and highest •
channels and may be called FRONT, A/V IN, VIDEO, 
HDMI etc. See the TV user manual on how to select 
the correct input on the TV.
Select the correct TV system
Change this setting if the video does not appear 
correctly. By default, this setting matches the 
most common setting for TVs in your countr y.
1 Press  SYSTEM MENU.
2 Select  [Preference Page].
3 Select  [TV Type] and then press.
4  Select a setting and then press OK /  .
•[PAL] -...

19
2 Press  SYSTEM MENU to exit the menu.
3 Press  DISC followed by numeric key “1” to 
turn off the progressive scan mode on the 
unit.
The blue Philips DVD background  »
screen is displayed.
Note
In the progressive mode, if you press  •DISC followed 
by numeric key “1” during normal play, the progressive 
scan mode will be turned off on the unit.
Turn on Progressive Scan
Progressive scan displays twice the number of 
frames per seconds than interlaced scanning 
(ordinar y TV system). With nearly double...

20
To access or exit the menu manually:
1 Press  DISC MENU.
For VCD with PlayBack Control (PBC) feature 
(version 2.0 only):
With the PBC feature, you can play VCD 
interactively according to the menu screen.
1  During play, press  DISC MENU to enable/
disable PBC .
When PBC is enabled, the menu  »
screen is displayed.
When PBC is disabled, normal play is  »
resumed.
Select an audio language
You can select an audio language on DVDs, 
DiVx video or VCDs.
1  During disc play, press  AUDIO.
The language...

21
To pause or resume play, press OK /  •
.
To skip to the previous/next fi le, press  •
/.
Play DivX video
You can play DivX fi les copied onto a CD-R/
RW, recordable DVD, USB device or SD/MMC 
card.
1  Inser t a disc or connect a USB device or 
SD/MMC card.
2  Select a source:
For discs, press   •DISC.
For USB devices or SD/MMC cards,  •
pressUSB/SD repeatedly.
3  Select a fi le to play and press OK /  .
To stop play, press   •
.
To pause or resume play, press OK /  •
.
To change a subtitle language,...