Philips Hts6520 User Manual

							31
   
 
 
2  Navigate to the photo folder/album and 
press  OK 
 to star t slideshow play.
   
 
 
Slideshow begins and continues till the    »
end of the photo folder or album. 
   
 
 
Audio continues to play till the end of    »
the disc.
   
 
 
 
 
 
 
To stop slideshow play, press  • 
 
.
   
 
 
To stop music play, press   • 
 
 again.
 
 
 
 
 
 
 
 
Play from USB device
 
 
This Home Theater System plays/views MP3, 
WMA, DivX (Ultra) or JPEG  les on the 
following USB devices:
   
 
 
digital camera that complies with the PTP  • 
standard
   
 
 
 ash drive • 
   
 
 
memory card reader • 
   
 
 
HDD (ex ternal power source needed) • 
 
 
 
 
 
  
 
 
 
 
 
 
1  Connect a USB device to the   
 
 (USB) 
 
jack.
   
 
 
2 Press  USB 
.
   
 
 
A contents menu is displayed.   »
 
 
 
 
 
 
3  Select a  le to play, then press   
.
   
 
 
Play star ts.   »
   
 
 
 
 
 
 
To stop play, press  • 
 
 or remove the 
USB device.
/
  Note
 
You may require longer time to display the disc   •
content on the T V due to the large number of 
songs/photos compiled onto one disc.
   
If the JPEG photo is not recorded with an ‘exif ’ 
  •
type  le, the actual thumbnail picture is not be 
shown on the display. It is replaced by a ‘blue 
mountain’ thumbnail picture.
   
This Home Theater System can only display 
  •
digital camera pictures according to the JPEG -
E XIF format, typically used by almost all digital 
cameras. It cannot display Motion JPEG and 
pictures in formats other than JPEG, or sound 
clips associated with pictures.
   
Folders/ les that exceed the suppor ted limit of 
  •
this Home Theater System are not displayed 
or played.
   
 
 
 
Control photo play
 
 
 
 
1  Play photo slideshow.
 
 
 
 
2  Use the remote control to control the 
photo. 
  Button  Action
 
  
Skips to the previous photo.
   
 
Skips to the nex t photo.
   
 
Rotates the photo clock wise.
   
 
Rotates the photo anti-
clockwise.
   
ZOOM 
Zooms in or out of the 
picture.
   
Play pause in zoom mode.
   
 
Stops play.
 
 
 
 
 
Play musical slideshow
 
 
Play MP3/ WMA music  les and JPEG 
photo  les simultaneously to create musical 
slideshow. The MP3/ WMA and JPEG  les 
must be stored on the same disc or USB 
device.
   
 
 
1  Play MP3/ WMA music. 
English
EN
Play
 
						

							32
   
 
 
 
 
Play from iPod
 
 
Simply dock your iPod to the  iPod DOCK 
 slot 
to enjoy your iPod play through this Home 
Theater System.
   
List of suppor ted iPod range:
 
iPod mini  iPod mini 2nd gen
  iPod touch  iPod touch 2nd gen
  iPod classic (80/120/160 
GB)  iPod nano 1st/2nd/
3rd/4th gen
  iPod with color display  iPod 5th gen
 
Note
 
Refer to the Philips website for latest updates   •
on the suppor ted iPod range.
 
 
 
 
Control iPod music
 
 
 
 
 
 
 
 
 
 
 
1  Dock your iPod to the  iPod DOCK 
 slot 
and turn it on.
   
 
 
2 Press  iPod DOCK 
. 
   
 
 
It may require longer time to  • 
authenticate the compatibility of 
cer tain iPod range. 
   
 
 
 
 
3  Star t play on your iPod. 
 
 
 
 
4  Use the remote control to control the 
music play. 
  Note
 
If the device does not  t into the USB jack ,   •
connect it through a USB ex tension cable.
   
If you connect a multiple USB card/device 
  •
reader, only one card/device can be accessed. 
 
 
 
 
 
 
Play from portable media 
player
   
Simply connect your por table media player (e.g. 
MP3 player) to this Home Theater System to 
enjoy superb sound quality from your music 
collections.
   
 
 
 
 
 
 
 
 
1  Connect a 3. 5mm stereo audio cable 
(not supplied) from the  MP3 LINK 
 jack 
on this Home Theater System to the 
‘headphone’ jack on the por table media 
player.
   
 
 
2 Press  AUDIO SOURCE 
 repeatedly until 
‘MP3 LINK’ is displayed.
   
 
 
3  Star t play on your por table media player.
   
 
 
To stop play, press   • STOP 
 on the 
por table media player.
  Note
 
Control playback is only possible on the   •
por table media player.
   
Stop play on the por table media player before 
  •
you switch to other play media /source.
MP3
EN
 
						

							33
   
 
 
 
 
Play from radio
 
 
Check if the FM antenna has been connected 
to this Home Theater System. If not, connect 
the supplied FM antenna to the  FM75  
 
 
 jack 
and  x its ends to the wall.
   
 
 
 
Tip
 
For bet ter FM stereo reception, connect an   •
ex ternal FM antenna (not supplied).
   
Position the antenna as far away as possible 
  •
from your T V, VCR or other radiation source 
to prevent interference.
   
 
 
 
First time tuning
 
 
When you access to radio mode for the  rst 
time, follow the instructions to install the radio 
stations. 
   
 
 
1 Press  RADIO 
.
   
 
 
’AUTO INSTALL ... PRESS PLAY’ is    »
displayed. 
   
 
 
 
 
2 Press   
.
   
 
 
All detected radio stations are stored.   »
   
 
 
Once complete, it tunes to the  rst    »
preset radio station.
   
 
 
 
 
 
 
To stop auto tuning, press   • 
 
.
FM ANTENNA
(75 Ω)
  Button  Action
 
 
VOL +/- 
,   
 
 
+/-  Increases or decreases 
volume.
   
SOUND 
MODE  Selects a prede ned sound 
effect.
   
AMBISOUND 
Selects stereo sound output 
or multi-channel surround 
output.
   
 
  
Skips to the previous or nex t 
track.
   
 
 /   
Searches fast-for ward (right) 
or fast-back ward (lef t). Press 
repeatedly to change the 
search speed.
   
 
Star ts, pauses or resumes 
playback on your EasyLink 
device.
   
 
 
 INFO 
Switches to ‘Ex tended 
Control mode’ to enable 
control of your iPod play 
through the contents 
displayed on T V. 
   
Control buttons on iPod 
have no function in this 
mode.
   
Press this button again to 
return to simple play mode.
  Note
 
While in iPod mode, the bat ter y of your iPod   •
will be charged.
   
In ‘Ex tended Control mode’, control of iPod 
  •
play is only possible through the screen display 
on your T V using the  Navigation buttons 
 on 
the remote control.
English
EN
Play
 
						

							34
   
 
 
 
Search and store radio stations 
individually
   
 
 
1 Press  RADIO 
.
 
 
 
 
2 Press   
 /   
.
   
 
 
It star ts searching until a radio station    »
is detected.
   
 
 
 
 
3  Repeat step 2 until you tune to the radio 
station you wish to store.
   
 
 
To  netune the radio frequency,  • 
press  
   /   
.
 
 
 
 
 
 
4 Press  PROGRAM 
.
   
 
 
The preset station number blinks.   »
   
 
 
If no action is carried out within 20    »
seconds after the above step, it exits 
the preset mode.
   
 
 
 
 
5 Press   
 /  
 (or the  Numeric buttons 
) to 
select a preset number to store.
   
 
 
6 Press  PROGRAM 
 to con rm.
 
 
 
 
 
 
 
Change tuning grid
 
 
In some countries, the frequency step 
between adjacent channels in FM band is 50 
kHz or 100 kHz.
  Note
 
This feature only applicable for cer tain region.  •
 
 
Change tuning grid erases all preset radio   •
stations.
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2 Press   
.
 
 
 
 
3  Press and hold   
 until ‘GRID 9’ or 
‘GRID 10’ is displayed.
   
 
 
‘GRID 9’ for 50 kHz and ‘GRID 10’ for    »
100 kHz.
  Note
 
This Home Theater System can store up to a   •
maximum of 40 radio stations.
   
If auto installation is not activated or less 
  •
than 5 radio stations are stored, you will be 
prompted to install the radio stations again.
   
 
 
 
Listen to radio
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Use the remote control to control the 
radio. 
  Button  Action
 
  
  
Selects a preset radio station.
   
 
  
Tunes the radio frequency up or 
down.
   
 
Press and hold this button to 
erase the current radio station 
from the preset list.
   
The preset number for other 
radio stations remain unchanged.
  Tip
 
Press    •AUDIO SYNC 
 to toggle between FM 
stereo and FM mono mode.
   
 
 
 
Reinstall all the radio stations
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Press and hold  PROGRAM 
 for more than 
5 seconds.
   
 
 
All previously stored radio stations are    »
replaced.
  Note
 
Check the radio antenna connection if no   •
stereo signal is detected or less than 5 stations 
are detected during radio installation.
EN
 
						

							35
   
 
 
 
Select a preset sound
 
 
 
 
 
 
 
1 Press  SOUND MODE 
 repeatedly to 
select the sound effect that most suitable 
for the video or music you play.
  Video/Music   Description
 
 
ACTION 
 / 
  ROCK  Enhanced low and high range 
for great sounding movie 
effects and atmosphere. 
Great for action movies and 
rock/pop music.
   
CONCERT 
 
 
/ 
  CLASSIC  Flat and pure sound mode. 
Ideal for listening to classical 
music and watching live 
concer t disc.
   
DRAMA 
 / 
  JAZZ  Clear mid and high range. 
Recreates the atmosphere of 
a live club with the ar tist just 
in front of you. Good for jazz 
music and watching dramas.
   
NEWS 
Enhanced mid range for clear 
vocals/speech.
   
GAMING 
 / 
  PART Y  Slightly enhanced low range 
and strong mid range ideal 
for par ty music and video 
gaming.
   
SPORTS 
Moderate mid range and 
surround effects for clear 
vocals and the atmosphere of 
a live spor ts venue.
   
 
 
 
 
 
 
 
 
 
6 Adjust sound
 
 
 
 
Control the volume
 
 
 
 
1 Press   
 
 +/- 
 ( VOL +/- 
) to increase or 
decrease the volume.
   
 
 
To mute, press   • 
 
.
   
 
 
To restore the volume, press   • 
 
 again 
or press  VOL + 
.
 
 
 
 
 
 
 
 
 
Adjust Bass/Treble
 
 
 
 
 
 
 
1 Press  TREBLE 
 or  BASS 
.
 
 
 
 
2  Within 5 seconds, press   
 
 +/- 
 ( VOL +/- 
) 
to set the high ( TREBLE) or low (BASS) 
tone level.
   
 
 
 
 
 
Select Ambisound
 
 
 
 
 
 
 
1 Press  AMBISOUND 
 repeatedly to select 
the best Ambisound output that most 
suitable for the video or music you play.
  Option  Description
 
 
AUTO 
Surround output based on the 
audio stream.
   
MULTI-
CHANNEL  5.1 multi-channel output for a 
standard movie experience.
   
STEREO 
Stereo sound from two front 
speakers.
English
EN
Play
 
						

							36
   
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in   •
the following pages.
 
 
 
 
  
 
 
 
 
 
[EasyLink Setup] 
   
If this Home Theater System is connected 
to HDMI CEC compliant T V/devices, all 
connected devices can respond to the 
following commands simultaneously:
  Option  Description
 
 
[EasyLink] 
Turns off or on all EasyLink 
features.
   
To disable this feature, select  [Of f ] 
.
   
[One 
To u c h  
Play]  When you press  PLAY 
, the 
T V and Home Theater System 
are turned on. Disc play star ts 
if there is a disc in the Home 
Theater System. 
   
To disable this feature, select  [Of f ] 
.
   
[One 
To u c h  
Standby]  When you press and hold 
  STANDBY 
 for at least 3 seconds, 
the Home Theater System and all 
the HDMI CEC devices switch to 
standby simultaneously. 
   
To disable this feature, select  [Of f ] 
.
   
[System 
Audio 
Control]  When you play audio that is routed 
from the connected devices, this 
Home Theater System switches 
to the corresponding audio source 
automatically.
   
To enable this feature, select 
  [On] 
. Then proceed to  [Audio 
Input Mapping] 
 to scan and map 
all the connected devices.
   
 
 
 
 
7 Adjust settings
 
 
You can customize various kinds of settings as 
you prefer. Refer to the following instructions to 
navigate through the setup menus. 
  Symbol  Options
 
 
 
 
[General Setup]
 
 
 
 
[Audio Setup]
 
 
 
 
[Video Setup]
 
 
 
 
[Preferences]
 
Note
 
If the setup option is grayed out, it means the   •
set ting cannot be changed at the current state.
 
 
 
 
 
General setup
 
 
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
.
OSD Language
Sleep Timer Screen Saver Disc Lock EasyLink Setup
Display Dim
General Setup
Low Power Standby
DivX(R) VOD Code
EN
 
						

							37
   
 
 
 
[Screen Saver] 
   
Turns off or on the screen saver mode. Helps 
to protect the T V screen from being damaged 
due to over exposure to a static image for too 
long.
   
 
 
  • [On] 
 – Sets the screen saver to appear 
af ter 15 minutes of inactivity (for 
example, in pause or stop mode).
   
 
 
  • [Of f ] 
 – Disables screen saver mode.
 
 
 
 
  
 
 
 
 
 
[Sleep Timer] 
   
Switches to standby automatically af ter the 
preset time.
   
 
 
  • [15 mins] 
,  [30 mins] 
,  [45 mins] 
,  [60 mins] 
 
– Selects the count down time before 
the Home Theater System switches to 
standby.
   
 
 
  • [Of f ] 
 – Disables sleep timer mode.
 
 
 
 
  
 
 
 
 
 
[Low Power Standby] 
   
Turns off or on the low power standby mode. 
Reduces power consumption in standby 
mode.
   
 
 
  • [On] 
 – Sets the standby mode to low 
power.
   
 
 
  • [Of f ] 
 – Sets the standby mode to normal 
power.
   
 
 
  
 
 
 
 
 
[DivX(R) VOD Code] 
   
Displays the DivX® registration code.
 
Tip
 
Enter this Home Theater System DivX   •
registration code when you rent or purchase 
video from w w w.div x.com/vod. The DivX 
videos rented or purchased through the 
DivX® VOD ( Video On Demand) ser vice 
can be played only on the device to which it is 
registered.
  Option  Description
 
 
[Audio 
Input 
Mapping]  When you map the audio 
input correctly, this Home 
Theater System switches to the 
audio from the played device 
automatically.
  Note
 
You must turn on the HDMI CEC operations   •
on the T V/devices before you can enjoy the 
EasyLink controls. See the T V/devices manual 
for details.
   
Philips does not guarantee 10 0% 
  •
interoperability with all HDMI CEC compliant 
devices.
   
  
 
 
 
 
 
[Disc Lock] 
   
Sets play restriction for a speci c discs. 
Before you star t, place the disc in the disc 
compar tment (maximum 40 discs can be 
locked).
   
 
 
  • [Lock] 
 – Restricts access to the current 
disc. Once activated, a password is 
needed to unlock and play the disc. 
   
 
 
  • [Unlock] 
 – Plays all discs.
 
Tip
 
You can set or change the password (see   •
‘Adjust set tings’ > ‘Preferences’ >  [Password] 
).
 
 
  
 
 
 
 
 
[Display Dim] 
   
Changes the brightness level of the display 
panel on this Home Theater System.
   
 
 
  • [10 0%]  
– Normal brightness.
   
 
 
  • [70%]  
– Medium brightness.
   
 
 
  • [4 0%] 
 – Dimmest display.
 
 
 
 
  
 
 
 
 
 
[OSD Language] 
   
Selects the default on-screen menu language.
 
 
  
Adjust settings
English
EN
 
						

							38
   
 
 
 
[HDMI Audio] 
   
Selects the HDMI audio setting when you 
connect this Home Theater System and the 
T V with a HDMI cable.
   
 
 
  • [On] 
 – Allows audio output through the 
T V and the speaker system. If the audio 
format on the disc is not suppor ted, it 
will be downmixed to two-channel sound 
(linear-PCM). 
   
 
 
  • [Of f ] 
 – Disables audio output from the 
T V. The sound is only output through the 
speaker system.
   
 
 
  
 
 
 
 
 
[Night Mode] 
   
Makes loud sound level sof ter and sof t sound 
level louder so that you can watch the DVD 
movies at a low volume, without disturbing 
others.
   
 
 
  • [On] 
 – Enjoys quiet viewing at night.
   
 
 
  • [Of f ] 
 – Enjoys surround sound with a full 
dynamic range.
  Note
 
Applicable only to Dolby Digital encoded discs.  •
 
 
 
 
 
 
Audio setup
 
 
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Audio Setup] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in   •
the following pages.
 
 
  
 
 
 
 
 
[Ambisound Setup] 
   
Optimizes the Ambisound based on this 
Home Theater System setup in the room (see 
‘Getting Star ted’ > ‘Star t Ambisound setup’).
  Option  Description
 
 
[Room 
Acoustics]  Selects the type of walls that 
surround the room.
   
[Room 
Placement]  Selects the placement in the 
room.
   
[Speaker 
Distance]  Selects the distance between 
speakers.
   
[Listening 
Position]  Selects the distance between 
the listening postion and this 
Home Theater System.
   
  
HDMI Audio Ambisound Setup
Night Mode
Audio Setup
EN
 
						

							39
   
 
 
 
[TV Display] 
   
Selects one of the following display formats:
 
 
 
 
 
 
 
  • [4:3 Pan Scan] 
 – For 4:3 screen T V: full-
height display with the trimmed sides.
   
 
 
  • [4:3 Let ter Box] 
 – For 4:3 screen T V: 
wide-screen display with black bars on 
the top and bottom of the screen.
   
 
 
  • [16:9 Wide Screen] 
 – For wide-screen 
T V: display ratio 16:9.
   
 
 
  
 
 
 
 
 
[Picture Setting] 
   
Selects a prede ned set of picture color 
settings or customize the personal setting.
   
 
 
  • [Standard] 
 – Original color setting.
   
 
 
  • [Bright] 
 – Vibrant color setting.
   
 
 
  • [Soft] 
 – Warm color setting.
   
 
 
  • [Personal] 
 – Customizes the color set ting. 
Set the level of brightness, contrast, 
sharpness/tint and color saturation, then 
press  OK 
.
 
 
 
 
  
 
 
 
 
 
[HDMI Setup] 
   
Selects the HDMI video setting when you 
connect this Home Theater System and the 
T V with a HDMI cable.
   
 
 
  • [Wide Screen Format] 
 – De nes wide 
screen format for disc play.
  Option  Description
 
 
[Superwide] 
Center position of the screen 
is stretched less than the side. 
Applicable only to 720p and 
above video resolution setting.
   
[4:3 Pillar 
Box]  No stretching of picture. Black 
bars are displayed on both 
sides of the screen.
   
[Of f ] 
Picture is displayed according to 
the disc format.
4:3 Letter Box (LB) 4:3 Pan Scan (PS)
16:9 (Wide Screen)
   
 
 
 
 
Video setup
 
 
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Video Setup] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in   •
the following pages.
 
 
  
 
 
 
 
 
[TV System] 
   
Change this setting if the video does not 
appear correctly. By default, this setting 
matches the most common setting for T Vs in 
your country.
   
 
 
  • [PAL] 
 – For PAL-system T V.
   
 
 
  • [NTSC] 
 – For NTSC-system T V.
   
 
 
  • [Multi] 
 – For T V that is compatible with 
both PAL and NTSC .
   
 
 
  
Video Setup
HDMI Setup
Progressive Closed Caption TV Display TV System
Picture Setting
Adjust settings
English
EN
 
						

							40
  Tip
 
There is more detailed description available   •
(see ‘Get star ted’ > ‘Turn on Progressive 
Scan’).
   
 
 
 
 
Preferences
 
Note
 
Stop disc play before you can access to   •
 
[Preferences] 
.
 
 
 
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Preferences] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in   •
the following pages.
 
 
  
Parental
MP3/JPEG Display PBC SubtitleAudio
Preferences
Disc Menu
DivX Subtitle Password
  Note
 
This set ting is only available if you have set the   •
 
[TV Display] 
 set ting to  [16:9 Wide Screen] 
.
 
 
  
 
 
 
 
  • [HDMI Video] 
 – Selects the HDMI video 
output resolution that is compatible with 
your T V display capability.
  Option  Description
 
 
[Auto] 
Detects and selects the best 
suppor ted video resolution 
automatically.
   
[48 0 i] 
,  [48 0 p] 
, 
  [576i] 
,  [576p] 
, 
  [720p] 
, 
  [10 8 0i] 
, 
  [10 8 0p]  Selects a video resolution 
that is best suppor ted by the 
T V. See the T V manual for 
details.
  Note
 
If the set ting is not compatible with your T V, a   •
blank screen appears. Wait for 15 seconds for 
auto recover or press  HDMI 
 repeatedly until 
the picture appears.
   
  
 
 
 
 
 
[Closed Caption] 
   
Turns off or on display captions.
   
 
 
  • [On] 
 – Shows the sound effects in 
subtitles. Applicable only to discs with 
Closed Caption information included and 
the TV suppor ts this feature.
   
 
 
  • [Of f ] 
 – Disables closed caption.
 
 
 
 
  
 
 
 
 
 
[Progressive] 
   
If the T V suppor ts progressive scan output, 
you can turn on the progressive scan mode to 
enhance the picture quality. Video connection 
through Component Video is required. 
   
 
 
  • [On] 
 – Turns on progressive scan mode.
   
 
 
  • [Of f ] 
 – Disables progressive scan mode.
EN