Philips Hts6520 User Manual

							11
   
 
 
 
Option 1: Connect to the HDMI jack
 
 
 
 
 
 
 
1  Connect an HDMI cable (not supplied) 
to the  HDMI OUT 
 jack on this Home 
Theater System and the HDMI input jack 
on the T V.
  Note
 
If your device suppor ts HDMI CEC , you can   •
control compliant devices with a single remote 
control. (see ‘Get star ted’ > ‘Use Philips 
EasyLink’).
  Tip
 
If the T V has a DVI connection only, connect   •
via a HDMI/DVI adaptor. Connect an audio 
cable for sound output.
   
You can optimize the video output. (see 
  •
‘Adjust set tings’ > ‘ Video setup’ >  [HDMI 
Setup] 
).
   
This type of connection provides the best 
  •
picture quality.
HDMI IN
HDMI OUT
 
 
 
 
 
 
Connect video cables
 
 
Connect this Home Theater System to TV to 
view disc play. Select the best video connection 
that the TV can suppor t.
   
 
 
 
Option 1: Connect to the HDMI jack (for  • 
a HDMI, DVI or HDCP-compliant T V ). 
   
 
 
Option 2: Connect to the component  • 
video jacks (for a standard T V or 
Progressive Scan T V ).
   
 
 
Option 3: Connect to the video (CVBS)  • 
jack (for a standard T V ).
  Note
 
You must connect this Home Theater System   •
directly to a T V.
 
 
 
 
 
Before you connect
 
 
 
 
1  Push up the catch and remove the rear 
cover.
   
 
 
 
 
 
2  Connect the cables to the corresponding 
jacks and direct the cables to the open 
hole on top.
   
 
 
See the connection options in the  • 
following pages.
   
 
 
 
 
3  Once complete, close the rear cover.
 
Note
 
All the cables must be placed inside the rear   •
panel in order to close the rear cover properly.
 
 
 
 
 
 
Connect
English
EN
 
						

							12
   
 
 
 
Option 3: Connect to the Video 
(CVBS) jack
   
 
 
 
 
 
1  Connect a composite video cable to the 
  VIDEO OUT 
 jack on this Home Theater 
System and the VIDEO input jack on the 
TV.
  Note
 
The video input jack on the T V might be   •
labeled as A / V IN, VIDEO IN, COMPOSITE or 
BASEBAND. 
   
This type of connection provides standard 
  •
picture quality.
VIDEO 
OUT
VIDEO IN
   
 
 
 
Option 2: Connect to the component 
video jack
   
  
 
 
 
 
1  Connect the component video cable to 
the  COMPONENT VIDEO OUT 
 jack 
on this Home Theater System and the 
COMPONENT VIDEO input jack on the 
TV.
   
 
 
 
If a progressive scan T V is used, you  • 
may turn on the progressive scan 
mode .
 
Note
 
The component video input jack on the T V   •
might be labeled as Y Pb/Cb Pr/Cr or YUV. 
   
This type of connection provides good picture 
  •
quality.
COMPONENT
VIDEO OUT
EN
 
						

							13
   
 
 
 
 
Connect radio antenna
 
 
 
 
 
 
 
 
 
 
1  Connect the FM antenna to the  FM75 
  
 
jack on the subwoofer (for some models, 
this cable is already connected).
   
 
 
2  Ex tend the FM antenna and  x its ends to 
the wall.
  Tip
 
For bet ter FM stereo reception, connect to an   •
ex ternal FM antenna.
FM ANTENNA
(75 Ω)
   
 
 
 
 
Connect speakers and 
subwoofer
   
 
 
 
 
 
 
 
 
 
 
 
 
 
1  Connect the lef t and right speakers to the 
matching jacks on the subwoofer.
   
 
 
2  Unwind the subwoofer’s interconnect 
cable at  TO MAIN UNIT  
and connect 
it to the  TO SUBWOOFER 
 jack on this 
Home Theater System.
  Note
 
Ensure that the front por tion of the plug is fully   •
inser ted into the jack .
LEFT
RIGHT
TO SUBWOOFER
TO MAIN UNIT
 
 
 
 
 
 
Connect
English
EN
 
						

							14
   
 
 
 
Connect audio from cable box/
recorder/game console
   
You can choose to connect to analog or digital 
jack depending on the device capabilities.
   
  
 
 
 
Connect to analog jacks 
 
 
  
 
 
 
 
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX2 
 or  AUX3 
 jacks 
on the subwoofer and the AUDIO output 
jacks on the device. 
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘AUX2 INPUT’ or ‘AUX3 
INPUT’ is displayed on the display panel. 
   
  
AUX 2
AUDIO INAUDIO OUT
   
 
 
 
 
Connect audio cables/other 
devices
   
Route the audio from other devices to this 
Home Theater System to enjoy audio play with 
multi-channel surround capabilities.
   
 
 
Connect audio from TV
 
 
(also used for EasyLink control)
 
 
 
 
 
 
 
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX1 
 jacks on the 
Home Theater System and the AUDIO 
output jacks on the T V. 
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘AUX1 INPUT’ is displayed on 
the display panel. 
AUDIO OUT
EN
 
						

							15
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘OPTICAL INPUT’ is displayed 
on the display panel.
   
 
 
 
Connect portable media player
 
 
  
 
 
 
 
1  Connect a 3. 5mm stereo audio cable (not 
supplied) to the  MP3 LINK 
 jack on this 
Home Theater System and the phone 
jack on the por table media player (such as 
MP3 player).
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘MP3 LINK’ is displayed on the 
display panel. 
MP3
   
 
Connect to coaxial jack  
 
 
 
 
 
 
 
1  Connect a coaxial cable (not supplied) to 
the  COA XIAL DIGITAL-IN 
 jack on the 
subwoofer and the COA XIAL /DIGITAL 
output jack on the device.
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘COA XIAL INPUT’ is 
displayed on the display panel.
   
  
 
 
 
Connect to optical jack 
 
 
  
 
 
 
 
1  Connect an optical cable (not supplied) 
to the  OPTICAL DIGITAL-IN 
 jack on 
the subwoofer and the OPTICAL /SPDIF 
output jack on the device.
DIGITAL INCOAXIAL
DIGITAL OUT
DIGITAL OUT
OPTICAL / 
DIGITAL IN
English
EN
   
 
 
 
 
Connect
 
						

							16
   
 
 
 
Connect iPod
 
 
  
 
 
 
 
1  Push the ‘slide’ button (A) to one side 
and move the ‘holder’ (C) until you get 
the best position to  t your iPod.
   
 
 
2  Release the ‘slide’ button (A).
 
 
 
 
3  Select a matching dock adaptor (D) and 
attach it to the ‘holder’ (C).
   
 
 
4  Dock your iPod to  iPod DOCK 
 slot on 
this Home Theater System.
  Note
 
To listen to the audio output from this   •
connection, press  iPod DOCK 
.
DOCK POSITION SWITCH
A
C
B
D
 
 
 
 
 
Connect USB device
 
 
  
 
 
 
 
1  Connect the USB device to   
 
 
 
USB 
 jack 
on this Home Theater System.
  Note
 
This Home Theater System can only play/view   •
MP3, WMA, DivX (Ultra) or JPEG  les that are 
stored on such devices.
   
Press  
  •USB 
 to access the content and play the 
 les.
EN
 
						

							17
   
 
 
 
 
 
 
 
Attach table stand
 
 
 
  
 
 
 
 
 
 
A  = table stand bracket.
 
 
 
 
 
 
 
 
1  Ensure all the required cables are 
connected to this Home Theater System 
and close the rear cover.
   
 
 
2  Attach the table stand bracket to the rear 
of this Home Theater System.
   
 
 
Align the arrow indicators for  • 
correct positioning and placement.
   
 
 
Use the protrude panels to hold the  • 
table stand bracket.
Align Arrow With table Stand
A
A
Align Arrow 
With table Stand
A
   
 
 
 
 
Connect power cord
 
Warning
 
Risk of product damage! Ensure that the   •
power supply voltage corresponds to the 
voltage printed on the back or underside of 
the subwoofer. Set the voltage selector (if any) 
correctly before you connect the subwoofer 
to the power outlet.
   
 
 
1  Connect the power cord to the power 
outlet when all the required connections 
are done.
   
 
 
The Home Theater System is ready to    »
be set up for use.
English
EN
   
 
 
 
 
Connect
 
						

							18
   
  
 
 
 
 
5  Screw the supplied knob to the hole at 
the center rear to secure the bracket.
   
 
 
  
 
 
 
 
 
 
 
 
 
 
Mount the Home Theater 
System
  Caution
 
Risk of personal injur y and damage to the   •
product. Allow only quali ed persons to 
mount the product.
   
 
 
1  Ensure all the required cables are 
connected to this Home Theater System 
and close the rear cover.
   
 
 
2  Attach the big wall mount bracket to the 
table stand bracket with screws.
   
 
 
 
 
 
3  Position the brackets on the wall, drill 
four screw holes and secure the brackets 
onto the wall with screws (not supplied).
   
  
 
 
 
 
4  Hook the Home Theater System  rmly 
onto the mounted bracket.
B
A
EN
 
						

							19
   
 
 
3  Fix two screws (not supplied) to the wall, 
then hook the bracket onto the screws 
and lock the speaker into position.
   
 
 
  
 
 
 
 
 
Mount the speakers
 
Caution
 
Risk of personal injur y and damage to the   •
product. Allow only quali ed persons to 
mount the product.
   
 
 
1  Loosen the screws at the bottom of the 
speaker to remove the speaker stand.
   
  
 
 
 
 
2  Attach the small wall mount bracket to 
the speaker with screws.
   
  
English
EN
 
 
 
 
 
 
Connect
 
						

							20
   
 
 
 
Control a play source
 
 
 
 
1 Press   
 
RADIO 
,  USB 
 or  DISC 
 button to 
select the source you wish to control.
   
 
 
2  Select the desired function (for example  
 
,   
). 
 
 
 
 
 
 
 
Navigate through the menu
 
 
  
 
 
 
 
1  Point the remote control directly at the 
remote sensor on the product and select 
the desired function.
   
 
 
2  Press the following buttons on the 
remote control to navigate through the 
on-screen menus.
  Button  Action
 
  
  
Move up or down
   
 
Move lef t or right
   
OK 
Con rm a selection
 
 
 
Enter numbers
 
 
 
 
 
 
4 Get started
 
 
 
 
Insert the remote control 
batteries
   
 
  
 
 
 
 
 
 
1  Slide the batter y cover off the back of the 
remote control.
   
 
 
2  Inser t the 2 supplied batteries (A A A). Be 
sure the + and - ends of the batteries line 
up with the markings inside the case.
   
 
 
3  Slide the cover back into position.
 
Note
 
Do not mix bat teries (old and new or carbon   •
and alkaline, etc.).
   
Remove bat teries if they are exhausted or if 
  •
the remote control is not to be used for a long 
time.
   
Bat teries contain chemical substances, they 
  •
should be disposed of properly.
EN