Philips Hts6520 User Manual

							21
   
 
 
 
Select menu display language
 
Note
 
Skip this set ting if this Home Theater System   •
is connected to a HDMI CEC compliant T V. It 
switches automatically to the same OSD menu 
language as per your T V set ting.
   
 
  
 
 
 
 
 
 
1 Press  DISC 
.
 
 
 
 
2 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
3 Press   
.
 
 
 
 
4 Press   
  
 to select  [OSD Language] 
 in 
the menu, then press  
  .
   
 
 
The language options are different  • 
depending on your countr y or 
region. It may not correspond to the 
illustration shown here. 
   
 
 
 
 
5 Press   
  
 to select a language, then press 
  OK 
.
 
Tip
 
You can set the default language for DVD disc   •
menu (see ‘Adjust set tings’ > ‘Preferences’ > 
  [Disc Menu] 
).
Screen Saver EasyLink Setup
Disc Lock
General Setup
Sleep Timer
Low Power Standby
Display Dim
OSD Language
DivX(R) VOD code
Ó×i
						

							22
   
 
 
 
 
 
 
  
 
 
 
 
 
To select the condition of the room 
   
 
 
Select   • [Room Acoustics] 
 and press  
 
.
 
 
  
 
 
 
 
 
To select this Home Theater System 
placement in the room 
   
 
 
Select   • [Room Placement] 
 and press  
 
.
 
 
  
 
 
 
 
 
To select the distance between two speakers 
   
 
 
Select   • [Speaker Distance] 
 and press  
 
.
 
 
  
 
 
 
 
 
To select the distance between the listening 
position and the speakers 
   
 
 
Select   • [Listening Position] 
 and press  
 
.
Room Placement
Speaker Distance
Listening Position
Ambisound Setup
Room Acoustics
Soft
Hard
   
 
 
 
 
Start Ambisound  setup
 
 
Change the Ambisound setup according to your 
room environment and setup in order to obtain 
the best possible surround sound effect.
  Note
 
Before you star t, ensure that you have made   •
all the required connections.
   
Complete the Ambisound setup before you 
  •
inser t a disc to play.
 
 
 
  
 
 
 
 
 
 
1 Press  DISC 
.
 
 
 
 
2 Press   
 
 SETUP 
.
 
 
 
 
3 Press   
 to select  [Audio Setup] 
 in the 
menu, then press  
  .
 
 
 
 
4 Select  [Ambisound Setup] 
 in the menu, 
then press  
  .
   
 
 
If the setup option is not accessible,  • 
press 
   twice before you tr y the 
above steps again.
   
 
 
 
 
5 Press   
  
 to select a setting in the menu, 
then press  OK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
HDMI Audio
Night Mode
Audio Setup
Ambisound Setup
EN
 
						

							23
  Note
 
During play, when progressive scan mode is on   •
for both this Home Theater System and the 
T V, distor ted picture may display. Turn off the 
progressive scan feature on both this Home 
Theater System and the T V.
   
 
 
 
 
Use Philips EasyLink
 
 
Your Home Theater System suppor ts 
Philips EasyLink, which uses the HDMI CEC 
(Consumer Electronics Control) protocol. 
EasyLink-compliant devices that are connected 
through HDMI connectors can be controlled by 
a single remote control. 
  Note
 
Philips does not guarantee 10 0%   •
interoperability with all HDMI CEC devices.
 
 
 
 
1  Turn on the HDMI CEC operations on 
the T V and other connected devices. See 
T Vs/devices manual for details.
   
 
 
2  You can now enjoy the following Philips 
EasyLink controls.
   
EasyLink 
   
You can turn off or turn on all EasyLink 
features.
   
One-touch play  
   
When you connect your Home Theater 
System to devices that suppor t one-touch 
play, you can control your Home Theater 
System and the devices with one remote 
control. For example, when you press Play 
on your DVD remote control, your T V 
automatically switches to the correct channel 
to show the DVD content. 
   
To enable One-touch play, a video disc must 
be placed in the disc compar tment before 
operation.
   
 
 
 
 
 
 
Turn on Progressive Scan
 
 
If the TV suppor ts progressive scan output, you 
can connect this Home Theater System and 
the TV using component video connection. 
(see ‘Connect video cables’ > ‘Connect to the 
component video jack’).
   
 
  
 
 
 
 
 
 
1  Turn on the T V and ensure that the T V 
progressive scan mode is deactivated (see 
the T V user manual).
   
 
 
2  Switch the T V to the correct viewing 
channel for this Home Theater System.
   
 
 
3 Press  DISC 
.
 
 
 
 
4 Press   
 
 SETUP 
.
 
 
 
 
5 Press   
 to select  [Video Setup] 
 in the 
menu, then press  
  .
 
 
 
 
6 Select  [Progressive] 
 >  [On] 
, then press 
  OK 
.
   
 
 
A warning message is displayed.   »
 
 
 
 
 
 
7  To proceed, select  [Ok] 
 and press  OK 
.
   
 
 
The progressive setup is complete.   »
 
Note
 
If a blank /distor ted screen is displayed, wait for   •
15 seconds for the auto recover.
   
If no picture displayed, turn off the progressive 
  •
scan mode as follows: 1) Press   
 to open 
the disc compar tment. 2) Press  
  . 3) Press 
  AUDIO SYNC 
.
 
 
 
 
 
 
8 Press   
 
 SETUP 
 to exit the menu. 
 
 
 
 
9  You can now turn on the progressive scan 
mode on the T V.
On
Off
Video Setup
HDMI Setup
Progressive Closed Caption TV Display TV System
Picture Setting
English
EN
   
 
 
 
 
Get started
 
						

							24
   
 
 
1 Press  DISC 
.
 
 
 
 
2 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
3 Press   
.
 
 
 
 
4 Select  [EasyLink Setup] 
, then press   
   
 
 
  • [One Touch Play] 
 and  [One Touch 
Standby] 
 functions are turned on by 
default in the factor y. 
   
 
 
 
 
5 Select  [System Audio Control] 
 >  [On] 
, 
then press  OK 
 to star t scanning devices.
   
 
 
Once complete, audio input mapping    »
menu is displayed.
   
  
 
 
 
 
 
 
6  Select the audio input of this Home 
Theater System that is used to connect to 
other HDMI device, then press  
  . 
   
 
 
For example, if the T V audio is  • 
connected to the  AUX1 
 jack on this 
Home Theater System, select  [Aux1 
Input] 
 and map with the T V (brand 
name) at the right panel.
   
 
 
 
 
7  Select the correct connected device, then 
press  OK 
.
   
 
 
Repeat steps 5~7 to map other    »
connected devices.
   
 
 
 
 
8 Press   
 
 SETUP 
 to exit the menu.
Audio Input Mapping
[TV]
other(non-HDMI) [DVD 3400]
Aux1 Input
Coaxial Input
Optical Input Aux2 Input
Aux3 Input
   
One-touch standby 
   
When you connect your Home Theater 
System to devices that suppor t standby, you 
can use your Home Theater System remote 
control to put your Home Theater System 
and all connected HDMI devices in standby 
mode. You can per form one-touch standby 
using the remote control from any of the 
connected HDMI devices.
   
System Audio Control 
   
When you connect your Home Theater 
System to HDMI CEC compliant devices, 
your Home Theater System can switch 
automatically to play audio from the 
connected device. 
   
To use one-touch audio, you must map the 
audio input from the connected device to 
your Home Theater System.
   
Audio Input Mapping 
   
When you map the audio input correctly, this 
Home Theater System switches to the audio 
from the played device automatically.
   
 
 
Map the audio inputs to the 
connected devices
  Note
 
Before you star t, ensure that the audio output   •
of the HDMI T V and other HDMI devices have 
been connected to the audio input jacks on 
this Home Theater System. 
   
  
EasyLink
One Touch Standby
System Audio Control
One Touch Play
Audio Input Mapping
Display Dim
Screen Saver OSD Language Disc Lock
General Setup
Sleep Timer
Low Power Standby
EasyLink Setup
DivX(R) VOD Code
EN
 
						

							25
   
 
On the remote control 
 
 
  
 
 
 
 
Press   • iPod DOCK 
 to switch to dock 
mode.
   
 
 
Press   • AUDIO SOURCE 
 repeatedly to 
switch to the connected audio source:
  Display  Device connected to
 
 
AUX1 INPUT 
AUDIO IN-AUX1 jacks
   
AUX2 INPUT 
AUDIO IN-AUX2 jacks
   
AUX3 INPUT 
AUDIO IN-AUX3 jacks
   
COA XIAL 
INPUT  DIGITAL IN-COA XIAL jack
   
OPTICAL 
INPUT  DIGITAL IN-OPTICAL jack
   
MP3 LINK 
MP3 LINK jack
   
 
 
Press   • RADIO 
 to switch to FM band.
   
 
 
Press   • USB 
 to switch to USB mode.
   
 
 
Press   • DISC 
 to switch to disc mode.
 
 
 
 
 
 
 
 
Select a play source
 
 
 
On the main unit 
 
 
  
 
 
 
 
Press   • SOURCE 
 repeatedly to select: 
  DISC 
 >  IPOD 
 >  RADIO  
 
 
 
FM 
 > 
  COA XIAL INPUT 
 >  OPTICAL INPUT 
 
>  AUX 
 
1 INPUT 
 
 
>   
  AUX2 INPUT 
 > 
  AUX3 INPUT 
 >  MP3 LINK 
 >  USB 
 > 
  DISC 
 ...
 
 
 
 
  
English
EN
 
 
 
 
 
 
Get started
 
						

							26
   
 
 
 
 
Play video
 
Note
 
For video disc, playback always resumes from   •
the point where it was last stopped. To star t 
play from the beginning, press  
   while the 
message is displayed.
   
 
 
Control video play
 
 
 
 
1  Play a title.
 
 
 
 
2  Use the remote control to control the 
title. 
  Button  Action
 
  
Star ts, pauses or resumes disc 
play.
   
 
Stops disc play.
   
 
Skips to the nex t title or chapter.
   
 
Skips to the beginning of the 
current title or chapter. Press 
twice to jump to the previous 
title or chapter.
   
 
 /   
Searches fast-for ward (right) 
or fast-back ward (lef t). Press 
repeatedly to change the search 
speed.
   
In pause mode, slow motion 
back ward or for ward play.
   
 
 /   
Searches slow-for ward (down) 
or slow-back ward (up). Press 
repeatedly to change the search 
speed.
   
For VCD, only slow-for ward play 
is possible.
   
 
 
 
 
 
 
5 Play
 
 
 
 
Play a disc
 
Caution
 
Never place any objects other than discs into   •
the disc compar tment.
   
Never touch the disc optical lens inside the 
  •
disc compar tment.
 
 
 
 
1 Press   
 to open the disc compar tment.
 
 
 
 
2  Inser t a disc with its label facing up.
   
 
 
For double-sided disc, load the side  • 
to play faces up.
   
 
 
 
 
3 Press   
 to close the disc compar tment 
and star t disc play.
   
 
 
To view disc play, turn on the T V to  • 
the correct viewing channel for this 
Home Theater System.
   
 
 
To stop disc play, press   • 
 
.
 
Note
 
Check the types of discs suppor ted (see   •
‘Speci cations’ > ‘Playback media’).
   
If the password entr y menu is displayed, enter 
  •
the password before you can play the locked 
or restricted disc.
   
If you pause or stop a disc for about 15 
  •
minutes, the screen saver activates. To 
deactivate the screen saver, press  DISC 
.
   
Af ter you pause or stop a disc and no but tons 
  •
are pressed within 30 minutes, this Home 
Theater System automatically switches to 
standby mode.
EN
 
						

							27
   
 
 
 
Access DVD menu
 
 
  
 
 
 
 
1 Press  DISC 
 to access disc main menu.
 
 
 
 
2  Select a play option, then press  OK 
.
   
 
 
In some menus, press the   • Numeric 
buttons 
 to input your selection.
   
 
 
To return to the title menu during  • 
play, press  
   
 BACK 
.
 
 
 
 
 
 
 
 
 
Access VCD  menu
 
 
The PBC (Playback Control) for VCD is 
activated by default in the factor y. When you 
load in a VCD, the contents menu is displayed. 
   
 
 
1 Press   
  
 to select a play option, then 
press  OK 
 to star t play.
   
 
 
If PBC is off, it skips the menu and  • 
star ts play from the  rst title.
   
 
 
To return to the menu during play,  • 
press  
   
 BACK 
 (only possible if the 
PBC mode is on).
  Tip
 
You can change the PBC set ting (see ‘Adjust   •
set tings’ > ‘Preferences’ >  [PBC] 
).
 
 
 
 
 
Change video play
 
 
 
 
1  Play a title.
 
 
 
 
2  Use the remote control to change the 
video play. 
  Button  Action
 
 
AUDIO 
SYNC  Selects an audio language or 
channel on a disc.
   
SUBTITLE 
Selects the subtitle language on 
a disc.
   
REPEAT 
Selects or turns off repeat or 
shuf e mode. 
   
Repeat options var y depending 
on the disc type. 
   
For VCDs, repeat play is only 
possible if the PBC mode is 
turned off.
   
ZOOM 
Zooms in or out of the picture.
   
To pan through the zoomed 
image, press the  Navigation 
buttons 
.
   
 
 
 INFO 
Displays the current status or 
disc information.
   
You can change the video 
play options here without 
interrupting disc play.
  Note
 
Some operations may not work with some   •
discs. See the information accompanying the 
disc for details.
Play
English
EN
 
						

							28
   
 
 
 
Quick skip play to a speci c time
 
 
  
 
 
 
 
1  During play, press   
 
 INFO 
.
   
 
 
The disc status menu is displayed.   »
 
 
 
 
 
 
2 Press   
  
 to view information, then press 
  OK 
.
   
 
 
  • [TT Time] 
 (title time) 
   
 
 
  • [Ch Time] 
 (chapter time) 
   
 
 
  • [Disc Time] 
 (disc time) 
   
 
 
  • [Track Time] 
 (track time) 
 
 
 
 
 
 
3  Press the  Numeric buttons 
 to enter the 
time where you want to skip to, then 
press  OK 
.
 
Note
 
The options are different depending on the   •
disc type.
 
 
 
 
 
Sync audio output with video play
 
 
If the video play is slower than the audio 
output (sound does not match with the 
pictures), you can delay the audio output to 
match the video.
   
  
 
 
 
 
1  Press and hold  AUDIO SYNC 
 until 
‘AUDIO SYNC’ is displayed.
   
 
 
2  Within  ve seconds, press   
 
 +/- 
 to set 
the delay time for audio output.
  Note
 
If the volume control is not used within  ve   •
seconds, it resumes normal volume control 
function. 
   
 
 
 
View video play from different camera 
angles
   
 
 
1  During play, press and hold  ANGLE 
 to 
display the angle options.
   
 
 
2  Press the  Numeric buttons 
 to select an 
angle.
   
 
 
Play changes to the selected angle.   »
 
Note
 
Applicable only to discs contain multi-angle   •
scenes.
EN
 
						

							29
   
 
 
 
 
Play music
 
 
 
 
Control audio track play
 
 
 
 
1  Play a track.
 
 
 
 
2  Use the remote control to control the 
track. 
  Button   Action
 
  
Star ts, pauses or resumes 
disc play.
   
 
Stops disc play.
   
 
Skips to the nex t track.
   
 
Skips to the beginning of 
the current track. Press 
twice to jump to the 
previous track.
   
 
Selects an item to play.
   
 
 /   
Searches fast-forward 
(right) or fast-back ward 
(lef t). Press repeatedly to 
change the search speed.
   
REPEAT 
Selects or turns off repeat 
or shuf e mode.
   
 
 
 
Play DivX® video
 
 
DivX video is a digital media format that 
retains high quality despite a high rate of 
compression. You can enjoy DivX video on 
this DivX® Cer ti ed Home Theater System.
   
 
 
1  Inser t a disc or USB that contains the 
DivX videos.
   
 
 
2 Press  DISC 
 or  USB 
.
   
 
 
A contents menu is displayed.   »
 
 
 
 
 
 
3  Select a title to play, then press   
.
 
 
 
 
4  Use the remote control to control the 
title. 
   
Button   
Action
 
 
AUDIO 
SYNC  Selects an audio language or 
channel.
   
SUBTITLE 
Select DVD or DivX subtitle 
languages.
   
 
Stops play.
   
For DivX Ultra video, press 
this button again to display the 
contents menu.
   
 
 
 INFO 
Displays DivX Ultra video 
information.
  Note
 
You can only play DivX videos that were   •
rented or purchased with the DivX 
registration code of this Home Theater System 
(see ‘Adjust set tings’ > ‘General setup’ > 
  [DivX(R) VOD Code] 
) .
   
You can play DivX video  les of up to 4GB .
  •
 
 
If the subtitle does not appear correctly,   •
change the character set (see ‘Adjust set tings’ 
> ‘Preferences’ >  [DivX Subtitle] 
).
   
This Home Theater System can display up to 
  •
45 characters in the subtitle.
English
EN
Play
 
						

							30
   
 
 
 
 
Play photo
 
 
 
 
Play photo as slideshow
 
 
This Home Theater System can play JPEG 
photos ( les with .jpeg or .jpg ex tensions).
   
 
 
1  Inser t a disc or USB that contains the 
JPEG photos.
   
 
 
2 Press  DISC 
 or  USB 
.
   
 
 
Slideshow begins (for Kodak disc) or    »
a contents menu (for JPEG disc) is 
displayed.
   
 
 
 
 
3  Select the folder/album you want to play.
   
 
 
To preview the photos in the folder/ • 
album, press  
   
 INFO 
.
 
 
  
 
 
 
 
To go to previous or nex t screen  • 
display, press  
   /   
.
   
 
 
To select a photo, press the  • 
  Navigation buttons 
.
   
 
 
To display the selected photo only,  • 
press  OK 
.
 
 
 
 
 
 
4 Press   
 to star t slideshow play.
   
 
 
To return to the menu, press   • 
 
 
 
BACK 
.
 
 
 
 
 
Play MP3/WMA music
 
 
MP3/ WMA is a type of highly compressed 
audio  le ( les with .mp3 or .wma extensions).
   
 
 
1  Inser t a disc or USB that contains the 
MP3/WMA music.
   
 
 
2 Press  DISC 
 or  USB 
.
   
 
 
A contents menu is displayed.   »
 
 
 
 
 
 
3  Select a folder, then press  OK 
.
 
 
 
 
4  Select a track to play, then press   
.
   
 
 
To return to the main menu, press   • 
 
 
 BACK 
 or press   
 until ‘Previous’ 
folder is selected, then press  OK 
.
 
Note
 
For disc recorded in multiple sessions, only the   •
 rst session is played.
   
This Home Theater System does not suppor t 
  •
MP3PRO audio format.
   
If any special characters are present in the MP3 
  •
track name (ID3) or album name, it might not 
be displayed correctly on the screen because 
these characters are not suppor ted. 
   
Some WMA  les are protected by Digital 
  •
Rights Management and cannot be played on 
this Home Theater System.
   
Folders/ les that exceed the suppor ted limit 
  •
of this Home Theater System will not be 
displayed or played.
  Tip
 
You can select the display of data contents,   •
view folders or  les (see ‘Adjust set tings’ > 
‘Preferences’ >  [MP3/JPEG Display] 
).
EN