Philips Hts3366 User Manual

							
English
EN     31
Play
Play from USB device 
This unit can only play/view MP3, WMA, DivX 
(Ultra) or JPEG  fi les that are stored on such 
devices.
1 Connect a digital camera that comply with 
the PTP standard, USB  fl ash drive, or USB 
memory card reader to the  USB socket on 
this unit. 
2 Press  USB.
   A contents menu is displayed.
3 Select a  fi le to play, then press  u. 
For more information, see chapters 
‘Play music, Play photo, Play video’ for 
details.
4 To stop play, press  x  or remove the USB 
device.
    Tips
If the device does not  fi t into the USB socket, 
connec t it through a USB ex tension cable.
If a multiple USB card reader is used, only one of the 
connec ted USB drive contents can be accessed. 
If a USB HDD is used, ensure that an auxiliar y 
power cord connec ted to the USB HDD for proper 
operations.
Digital cameras that use PTP protocol or require 
additional programme installation when connec ted 
to a PC are not suppor ted.•
•
•
•
•
Play from portable media 
player
Simply connect your portable media player (e.g. 
MP3 player) to this unit to enjoy superb sound 
quality from your music collections.
MP3 LINK
1 Connect a 3.5mm stereo audio cable (not 
supplied) from the  MP3 LINK socket on 
this unit to the ‘headphone’ socket on your 
portable media player.
2 Press  AUX / MP3 LINK  repeatedly until 
‘MP3 LINK’ is displayed.
3 Start play on your portable media player.
See chapter ‘Adjust Sound’ to enhance 
the audio output.
4 To stop play, press STOP button on your 
portable media player.
 Note
Control playback is only possible on your por table 
media player.
Stop play on the por table media player before you 
switch to other play media /source.•
•
•
1_hts 3 366_93-9 8_en g4_fin al8 08.i n 31   3 11_hts3366_93-98_eng4_final808.in31   312008-0 2-2 2   1 0:1 7:4 5 A M2008-02-22   10:17:45 AM
 
						

							
32      EN
Play from radio 
Check if the FM antenna has been connected 
to this DVD Home Theatre unit. If not, connect 
the supplied FM antenna to the FM 75  Ω socket 
and  fi x its ends to the wall.
 Note
For China region only, if you want to receive AM/
MW radio band, connec t the AM/MW loop antenna 
(supplied) to the  AM/MW sockets on this DVD 
Home Theatre unit.•
    Tips
For bet ter FM stereo reception, connec t an ex ternal 
FM antenna (not supplied).
Position the antenna as far away as possible from 
your T V, VCR or other radiation source to prevent 
interference.•
•
First time tuning
The  fi rst time when you access ‘RADIO’ mode, 
follow the instructions to install the radio 
stations.  
1 Press  RADIO .
  ’AUTO INSTALL ... PRESS PLAY’ is 
displayed. 
2 Press  u.
  The unit starts searching from FM band  
followed by the AM/MW band.
  All the available radio stations with 
strong signal will be stored.
  Once complete, it tunes to the  fi rst 
preset radio station.
To stop auto tuning, press  x.
•
 Note
This Home Theatre unit can store up to a maximum 
of 40 radio stations (and 20 radio stations from 
AM/MW band).
If auto installation is not ac tivated or less than 5 radio 
stations are stored, ‘AUTO INSTALL’ will be displayed 
again the nex t time you turn on to radio mode. •
•
Listen to radio 
1 Press  RADIO  repeatedly to select ‘FM’ or 
‘AM/MW’ band.
2 Use the remote control to control the 
radio. 
Button Action
Select a preset radio station.
 m  M Tune the radio frequency 
backward/ forward.
Press and hold this but ton to 
delete the preset station from 
the preset list.
The preset number for 
other radio stations 
remain unchanged
•
1
_hts 3 366_93-9 8_en g4_fin al8 08.i n 32   3 21_hts3366_93-98_eng4_final808.in32   322008-0 2-2 2   1 0:1 7:4 6 A M2008-02-22   10:17:46 AM
 
						

							
English
EN     33
Play
Reinstall all the radio stations
1 Press  RADIO  repeatedly to select ‘FM’ or 
‘AM/MW’ band.
2 Press and hold  PROGRAM until ‘START’ is 
displayed.
   All previously stored radio stations will 
be replaced.
 Note
If no stereo signal is detec ted or less than 5 ( fi ve) 
stations are detec ted during radio installation, 
‘CHECK ANTENNA’ is displayed.•
Search and store radio stations 
individually
1 Press  RADIO  repeatedly to select ‘FM’ or 
‘AM/MW’ band.
2 Press  m M .
   ‘SEARCH’ is displayed until a radio 
station is detected.
3 Repeat step 2 until you tune to the radio 
station you wish to store.
To  fi netune the radio frequency, press 
vV .
4 Press  PROGRAM .
If no action is carried out within 20 
seconds after the above step, it exits 
the preset mode.
5 Press  íë  (or the  number buttons ) to 
select a preset number to store.
6 Press  PROGRAM  to confi rm.
•
•
Change tuning grid 
In some countries, the frequency step between 
adjacent channels in FM band is 50 kHz or 
100 kHz. (AM/MW is 9 kHz).
 Note
This feature only applicable for cer tain region.
Change tuning grid erases all preset radio stations.•
•
1 Press 
RADIO  repeatedly to select ‘FM’ or 
‘AM/MW’ band. 
2 Press  x.
3 Press and hold  u until ‘GRID 9’ or 
‘GRID 10’ is displayed.
‘GRID 9’ for 50 kHz and ‘GRID 10’ for 
100 kHz.
•
1
_hts 3 366_93-9 8_en g4_fin al8 08.i n 33   3 31_hts3366_93-98_eng4_final808.in33   332008-0 2-2 2   1 0:1 7:4 6 A M2008-02-22   10:17:46 AM
 
						

							
34      EN
6 Adjust sound
Control the volume
1 
Press  VOL +-  to increase or decrease 
the volume level.
To mute the volume, press  H.
To restore the volume, press  H again 
or press the volume button.
Select surround sound
1 Press  SURROUND  repeatedly to select a 
best surround output that available on the 
disc.
Options Descriptions
PARTY
Ideal for party music. It 
enhanced the stereo channel 
output by duplicating the 
sound output to the centre 
and rear speakers.
MULTI
CHANNELMulti-channel surround 
output: DTS (Digital Theatre 
Systems), Dolby Digital, and 
Dolby Pro Logic II.
STEREOStereo sound.
•
•
Select a preset sound effect
1 Press  SOUND MODES  +- repeatedly 
to select a sound effect that most suits the 
video or music you play.
Video /
Music Descriptions
CONCERT /
CLASSIC
Flat and pure sound mode. 
Ideal for listening to classical 
music and watching live 
concert DVDs.
DRAMA /
LOUNGEModerate sound mode 
suitable for lounge music 
and watching dramas.
ACTION /
ROCKEnhanced low and high 
range for great sounding 
movie effects and 
atmosphere. Great for 
action movies and rock/pop 
music.
GAMING /
SPORTSModerate mid range and 
surround effects for clear 
vocals and the atmosphere 
of a live sports venue, also 
ideal video gaming.
NIGHTDynamically controlled 
sound mode suitable for 
watching movies at night or 
for non-intrusive 
background music.
1 _hts 3 366_93-9 8_en g4_fin al8 08.i n 34   3 41_hts3366_93-98_eng4_final808.in34   342008-0 2-2 2   1 0:1 7:4 6 A M2008-02-22   10:17:46 AM
 
						

							
English
EN     35
Adjust sound
Adjust microphone volume 
level
1   Connect a microphone (not supplied) to 
MIC  socket on this unit. 
2   Turn on the microphone output. See 
chapter ‘Microphone settings’ for details. 
3 Press  MIC LEVEL .
   ‘LEVEL XX’ is displayed.
4 Adjust the volume control (or press 
VOL  +- repeatedly) to set the level for 
microphone volume.
Sing or speak through the microphone 
to fi nd your desired volume level .
 Note
If the volume control is not used within 10 seconds, it 
resumes nor mal volume control func tion. •
Turn off vocal (cancel voice)
1 
Press VOCAL  repeatedly until ‘VOICE 
CANCEL’ is displayed.
 Note
You cannot cancel the voice output from MP3, JPEG 
or SACD discs.•
•
Microphone settings
1 Turn on the TV to the correct viewing 
channel for this unit.
2 Press  KARAOKE . 
   [ Microphone Setup ]  menu is 
displayed.
3 Select an option and change the setting, 
then press  OK.
[ Mic ]
Turn on or off microphone output. [ On ]  – turn on microphone.   
[ Off ]  – turn off microphone.
[ Mic Volume ]
Press  vV to set the default microphone 
volume level.
[ Echo Level ]
Press  vV to set the echo level.
[ Key ]
Press  vV to set the pitch level that 
matches your voice.
[ Score ]
Select karaoke rating score level.
[ Off ]  – no score rating display.   
[ Basic ]  – basic rating.
[ Intermediate ]  – intermediate rating.
[ Advance ]  – advance rating.
4 To exit the menu, press  KARAOKE. 
•
•
•
•
•
•
1
_hts 3 366_93-9 8_en g4_fin al8 08.i n 35   3 51_hts3366_93-98_eng4_final808.in35   352008-0 2-2 2   1 0:1 7:4 6 A M2008-02-22   10:17:46 AM
 
						

							
36      EN
7 Adjust settings
This section describes the various setting 
options of this unit.  
Symbol Options
[ General Setup ]
 
[ Audio Setup ]
[ Video Setup ]
[ Preferences ]
General setup
1 
Press  OPTIONS .
   [ General Setup ]  menu is displayed.
2 Press B.
3 Select an option, then press  OK.
General Setup
Screen Saver
DivX(R) VOD Code Sleep
Display Dim
Disc Lock
OSD Language
See the explanations of the above 
options in the following pages.
4 Select a setting, then press 
OK.
To return to the previous menu, press 
BACK .
To exit the menu, press  OPTIONS.
•
•
• [ Disc Lock ] 
Set play restriction for a speci
fi c discs.  
Before you start, place the disc in the disc 
compartment (maximum 40 discs can be 
locked).
[ Lock ]  – restrict access to the current 
disc. The next time you want to play 
this disc or unlock it, you need to enter 
the password. 
[ Unlock ]  – all discs can be played.
 
   Tips
To set or change your password, go to 
[ Preferences ]  > [ Password ] .•
[ Display Dim ] 
Change the brightness level of the display 
panel to suit the lighting in your room.
[ 100% ]  – normal brightness.
[ 70% ]  – medium brightness.
[ 40% ]  – dimmest display. The LEDs 
and display icons will not be shown.
[ OSD Language ]
Select the default on-screen menu 
language.  
[ Screen Saver ]
Turn off or on the screen saver mode. It 
helps to protect the TV screen from being 
damage due to over exposure to a static 
image for too long. [ On ]  – set the screen saver to appear 
after 5 minutes of inactivity (for 
example, in pause or stop mode).
[ Off ]  – disable screen saver mode.
•
•
•
•
•
•
•
1
_hts 3 366_93-9 8_en g4_fin al8 08.i n 36   3 61_hts3366_93-98_eng4_final808.in36   362008-0 2-2 2   1 0:1 7:4 7 A M2008-02-22   10:17:47 AM
 
						

							
English
EN     37
Adjust settings
[ Sleep ]
Switch to standby automatically after the 
preset time.
[ Off ]  – disable sleep mode.
[ 15, 30, 45, 60 mins ]  – select the 
count down time before it switches to 
standby.
    Tips
You can direc tly access to sleep timer func tion by 
pressing  SLEEP repeatedly on the remote control 
until the count down time is displayed on the display 
panel. •
[ DivX(R) VOD Code ]
Display the DivX® registration code.
    Tips
Enter this unit’s DivX registr ation code when you 
rent or purchase video from w w w.div x.com/vod.  
The DivX videos rented or purchased through the 
DivX® VOD ( Video On Demand) ser vice can be 
played only on the device to which it is registered.  •
•
•
Audio setup
1 
Press  OPTIONS .
   [ General Setup ]  menu is displayed.
2 Press V to select  [ Audio Setup ] , then 
p ress  B.
3 Select an option, then press  OK.
Audio Setup
Speakers Volume
Speakers Delay
HDMI Audio
CD Upsampling
Audio Sync
See the explanations of the above 
options in the following pages.
4 Select a setting, then press  OK.
To return to the previous menu, press 
BACK .
To exit the menu, press  OPTIONS.
•
•
•
1
_hts 3 366_93-9 8_en g4_fin al8 08.i n 37   3 71_hts3366_93-98_eng4_final808.in37   372008-0 2-2 2   1 0:1 7:4 7 A M2008-02-22   10:17:47 AM
 
						

							
38      EN
[ Speakers Volume ]
When all the speakers are not placed in an 
equal distance from the listening position, 
change the volume level of the speakers so 
that those placed closer to the listening 
position will not sound too loud.
To star t, press OK.
Select a speaker in the menu, then 
press 
b B to adjust the volume level.
Press 
OK to con fi rm and exit.
1.
2.
3.
   
Tips
The test tone is emit ted from the speaker while 
adjusting volume level.•
[ Speakers Delay ]
When the centre or rear speakers are 
placed closer to the listening position than 
the front speakers, set the delay time for 
these speakers so that the sound output 
from all speakers reach the listening 
position at the same time.
To star t, press OK.
Select a speaker in the menu, then 
press 
b B to set the delay time.
Press 
OK to con fi rm and exit.
1.
2.
3.
   
Tips
1ms set ting for ever y 30cm distance between the 
speaker and the listening position.•
[ HDMI Audio ]
When you connect this unit and TV with 
HDMI cable, select the audio output 
setting for this connection.
[ All ]  – the sound is output through 
both your TV and this speakers system. 
If the audio format on the disc is not 
supported, it will be downmix to two-
channel sound (linear-PCM).  
[ Off ]  – disable audio output from 
your TV. The sound is only output 
through this speakers system.
[ CD Upsampling ]
Convert the music CD to a higher 
sampling rate using sophisticated digital 
signal processing for better sound quality.   [ Off ]  – turn off CD-upsampling.
[ 88.2 kHz (X2) ]  – convert the 
sampling rate of the CDs twice as high 
as the original rate. 
 Note
When you press  SURROUND to switch to multi-
channel mode, it automatically turns of f the CD-
upsampling feature.•
[ Audio Sync ]
Set the default delay time for audio output 
when you play a video disc.
To star t, press OK.
Select a speaker delay in the menu, 
then press 
b B to set the delay time.
Press 
OK to con fi rm and exit.
1.
2.
3.
•
•
•
•
1
_hts 3 366_93-9 8_en g4_fin al8 08.i n 38   3 81_hts3366_93-98_eng4_final808.in38   382008-0 2-2 2   1 0:1 7:4 7 A M2008-02-22   10:17:47 AM
 
						

							
English
EN     39
Adjust settings
Video setup
1 
Press  OPTIONS .
   [ General Setup ]  menu is displayed.
2 Press V to select   [ Video Setup ] , then 
p ress  B.
3 Select an option, then press  OK.
Video Setup
HDMI Setup
Closed Caption TV Display TV Type
Picture Settings Progressive
See the explanations of the above 
options in the following pages.
4 Select a setting, then press  OK.
To return to the previous menu, press 
BACK .
To exit the menu, press  OPTIONS.
•
•
• [ TV Type ]
Change this setting only if the video does 
not appear correctly. By default, this setting 
matches the most common setting for TVs 
in your country.  
[ PAL ]  – for PAL-system TV.
[ NTSC ]  – for NTSC-system TV.
[ Multi ]  – for TV that is compatible 
with both PAL and NTSC.
[ TV Display ]
Select the screen format according to how 
you want the picture to appear on your 
TV.  
4:3 LetterBox (LB)
4:3 PanScan (PS)
16:9 (Widescreen)
[ 4:3 Pan Scan ] – for standard TV, a 
full-height screen display with the sides 
trimmed.
[ 4:3 Letter Box ]  – for standard TV,  a 
‘wide-screen’ display with black bars on 
the top and bottom.
[ 16:9 Wide Screen ]  – for wide-screen 
TV (frame ratio 16:9). 
[ Progressive ]
If your TV can support progressive signals, 
you can activate the progressive scan 
mode of this unit. [ On ]  – turn on progressive scan 
mode.  
[ Off ]  – disable progressive scan mode.    
    Tips
See chapter ‘Get Star ted - Turn on Progressive Scan’ 
for detailed information.•
•
•
•
•
•
•
•
•
1_hts 3 366_93-9 8_en g4_fin al8 08.i n 39   3 91_hts3366_93-98_eng4_final808.in39   392008-0 2-2 2   1 0:1 7:4 7 A M2008-02-22   10:17:47 AM
 
						

							
40      EN
[ Picture Setting ]
Select a prede fi ned set of picture colour 
settings or customise your personal setting.
[ Standard ]  – original colour setting.   
[ Bright ]  – vibrant colour setting.
[ Soft ]  – warm colour setting.
[ Personal ]  – customise the colour 
setting.  Set the level of brightness, 
contrast, tint and colour saturation in 
the menu, then press  OK.
[ HDMI Setup ]
When you connect this unit and TV with 
HDMI cable, select the best HDMI setup 
that your TV can support.
[ Wide Screen Format ]  – defi ne the 
wide screen format for disc play. 
Options Descriptions
[ Superwide ] Centre position of the 
screen is stretched less 
than the side. This 
setting is only applicable 
if the video resolution is 
set to 720p or 1080i/p.
[ 4:3 Pillar 
Box ] No stretching of the 
picture. Black bars is 
displayed on both sides 
of the screen.
[ Off ] Picture will be displayed 
according to the format 
of the disc.
 Note
This set ting is only available if you have set the 
[ T V Display ] setting to [ 16:9 Wide Screen  ].•
•
•
•
•
•
[ HDMI Video ] – select a video 
resolution that is compatible with your 
TV display capability.
Options Descriptions
[ Auto ] It detects and selects the 
best supported video 
resolution automatically.
[ 480p, 576p, 
720p, 1080i, 
1080p ] Select a video resolution 
that best supported by 
your TV. See your TVs 
manual for details.
 Note
If the set ting is not compatible with your T V, a blank 
screen appear s. Wait for 15 seconds for auto recover 
or switch to its default mode as follows:  
1)  Pr ess 
Z.  2)  Press  b.  3)  Press  ZOOM.•
[ EasyLink ]  – enable all the HDMI CEC 
compliant TV/device response or react 
to certain commands simultaneously 
with one touch control.
Options Descriptions
[ Auto 
Wakeup TV ] It wake-ups your TV 
automatically when you 
press PLAY to power up 
this unit and start disc 
play (if a video disc is 
found in the disc 
compartment).
To disable this feature, 
select  [ Off ]
.
•
[ System 
Standby ] Respond to standby 
command from other 
HDMI CEC compliant 
TV/devices.
To disable this feature, 
select  [ Decline ] . 
•
•
•
1
_hts 3 366_93-9 8_en g4_fin al8 08.i n 40   4 01_hts3366_93-98_eng4_final808.in40   402008-0 2-2 2   1 0:1 7:4 8 A M2008-02-22   10:17:48 AM