Philips Hts3366 User Manual

							
English
EN     11
Connect
3 Connect 
This section describes the basic connections 
required for this DVD Home Theatre unit 
before it can be used.  
Basic connections:
Place the unit 
Connect video cables
Connect speaker cables to speakers
Connect speaker to speaker stand 
(for tallboy speakers)
Connect speakers and subwoofer
Connect radio antennas
Connect to power outlet
Optional connections: Connect other devices
Connect audio from TV
Connect audio from cable box/
recorder/game console
Connect portable media player
Connect USB device
 Note
Refer to the type plate at the rear or bot tom of the 
produc t for identi fi cation and supply ratings.
Before you make or change any connec tions, ensure 
that all the devices are disconnec ted from the power 
outlet.•
•
•
•
•
•
•
•
•
• •
•
•
•
Place the unit
Never place this unit in an enclosed cabinet.
Install this unit near the AC outlet where 
the AC power plug can be easily reached.
FRONT
RIGHT
FRONTLEFTCENTER
REAR
RIGHTREARLEFT
SUBWOOFER
1 Place this DVD Home Theatre unit near to 
the TV.
2 Place the speakers system as per the 
diagram shown above.   Find the most suitable placement for 
the speakers based on your room 
layout and set up to ensure optimum 
sound performance.
3 Place the subwoofer at the corner of the 
room or at least one metre away from the 
TV. 
 Note
Rear speaker s are labelled as RE AR LEF T and RE AR 
RIGHT.
Front speaker s are labelled as FRONT LEF T and 
FRONT RIGHT.
To avoid magnetic interference or unwanted noise, 
never place the speaker s too close to the T V or any 
radiation devices.•
•
•
•
•
•
1_hts 3 366_93-9 8_en g4_fin al8 08.i n 11   1 11_hts3366_93-98_eng4_final808.in11   112008-0 2-2 2   1 0:1 7:4 0 A M2008-02-22   10:17:40 AM
 
						

							
12      EN
Connect video cables
This section describes how to connect this 
DVD Home Theatre unit to your TV so to 
enable viewing of disc play.
Select the best video connection that your TV 
can support.
Option 1:  Connect to HDMI socket (for a 
HDMI, DVI or HDCP-compliant TV).
Option 2:  Connect to component video 
socket (for a standard TV or Progressive 
Scan TV).
Option 3:  Connect to S-Video socket (for a 
standard TV).
Option 4:  Connect to Video (CVBS) socket 
(for a standard TV).
 Note
You must connec t this unit direc tly to a T V.•
Option 1: Connect to HDMI socket 
HDMI IN
HDMI OUT
1 Connect a HDMI cable (not supplied) 
from the  HDMI OUT  on this unit to the 
HDMI IN socket on your TV.
•
•
•
•
 Note
The HDMI connec tor is only compatible with HDMI 
compliant T Vs and DVI-T Vs.•
   
Tips
To optimise the video output, see chapter ‘Adjust 
set tings’ >  [ Video Setup ]  > [ HDMI Setup ]  for 
details. 
This unit is HDMI CEC compatible. It enables 
connec ted T V/device to control each other over 
HDMI, see chapter ‘Ac tivate EasyLink control’ for 
details. 
Use a HDMI/DVI adaptor in case your T V has only 
a DVI connec tion. An ex tr a audio connec tion is 
needed to complete this connection.
To route the audio from your T V to this DVD Home 
Theatre unit, connec t an audio cable from the audio 
input on this unit to the audio output on your T V.
This type of connec tions provide best pic ture quality.•
•
•
•
•
Option 2:  Connect to component  video socket 
1_hts 3 366_93-9 8_en g4_fin al8 08.i n 12   1 21_hts3366_93-98_eng4_final808.in12   122008-0 2-2 2   1 0:1 7:4 0 A M2008-02-22   10:17:40 AM
 
						

							
English
EN     13
Connect
1 Connect the component video cables (not 
supplied) from the  Y P
B PR sockets on this 
unit to the component video input sockets 
on your TV.
If a progressive scan TV is used, you 
may turn on the progressive scan mode 
(see chapter ‘Turn on Progressive Scan’ 
for details).
   Tips
The component video input socket on your T V may 
be labelled as Y Pb/Cb Pr/Cr or YUV. 
This type of connec tions provide good pic ture 
quality.•
•
Option 3: Connect to S-Video socket 
S-VIDEO IN
S-VIDEO
1 Connect a S-video cable (not supplied) 
from the  VIDEO OUT-S-VIDEO  socket 
on this unit to the S-Video input socket on 
your TV.
    Tips
The component video input socket on your T V may 
be labelled as Y/C or S -VHS.
This type of connec tions provide standard pic ture 
quality.•
•
•
Option 4: Connect to Video (CVBS) 
socket 
CVBS
VIDEO IN
1 Connect a composite video cable (yellow - 
supplied) from the  VIDEO OUT-CVBS 
socket on this unit to the video input 
socket on your TV.
    Tips
The video input socket on your T V may be labelled 
as A / V IN, VIDEO IN, COMPOSITE or BASEBAND. 
This type of connec tions provide standard pic ture 
quality.•
•
1_hts 3 366_93-9 8_en g4_fin al8 08.i n 13   1 31_hts3366_93-98_eng4_final808.in13   132008-0 2-2 2   1 0:1 7:4 0 A M2008-02-22   10:17:40 AM
 
						

							
14      EN
Connect speaker cables to 
speakers
1 Connect the speaker cables to the 
matching colour sockets on the speakers 
(or speaker stands). 
Connect speaker to speaker 
stand
1 Attach the speakers to the speaker stands 
and secure the position with screws.  
Connect speakers and 
subwoofer
FRONT
LEFT FRONT
RIGHT
FRONT
CENTER
SUBWOOFER
REAR LEFT REAR
RIGHT
1 Connect the speakers and subwoofer to 
the matching sockets on this unit.
 Note
Ensure that the colour s of the plugs and sockets are 
matched.•
1 _hts 3 366_93-9 8_en g4_fin al8 08.i n 14   1 41_hts3366_93-98_eng4_final808.in14   142008-0 2-2 2   1 0:1 7:4 0 A M2008-02-22   10:17:40 AM
 
						

							
English
EN     15
Connect
Connect radio antenna
34
1 2
 Note
AM/MW loop antenna connec tion is only available 
for China region only.•
1 Stand the AM/MW loop antenna 
(supplied) upright to 
fi x its claw into the 
slot.
2 Connect the AM/MW loop antenna to the 
AM/MW  socket. Then place it on a shelf, 
or attach it to a stand or wall.
3 Connect the FM antenna (supplied) to the 
FM75 Ω socket on this unit (for some 
models, this cable has been connected). 
Extend the FM antenna and  fi x its ends to 
the wall.
4 Connect the power cord when all the 
required connections are done and you are 
ready to enjoy this DVD Home Theatre 
unit.
 Note
Before connec t to power outlet, ensure that the 
voltage selec tor (at the rear of this unit) is set to the 
local power line voltage. •
Connect other devices
This section describes how you can route the 
sound from other devices to this DVD Home 
Theatre unit in order to enjoy sound output or 
audio play with multi-channel surround 
capabilities.
Connect audio from TV
AUX 1
1   Connect an audio cable (not supplied)  from the  AUDIO IN-AUX1  sockets on 
this unit to the AUDIO OUT sockets on 
your TV. 
 Note
To listen to the audio output from this connec tion, 
press  AUX / MP3 LINK  repeatedly until ‘AUX1’ is 
displayed on the display panel. •
1 _hts 3 366_93-9 8_en g4_fin al8 08.i n 15   1 51_hts3366_93-98_eng4_final808.in15   152008-0 2-2 2   1 0:1 7:4 1 A M2008-02-22   10:17:41 AM
 
						

							
16      EN
Connect audio from cable box/
recorder/game console
You can choose to connect to analogue or 
digital socket depending on the device 
capabilities.
Connect to analogue sockets
AUX 2
1   Connect an audio cable (not supplied) 
from the  AUDIO IN-AUX2  sockets on 
this unit to the AUDIO OUT sockets on 
the device. 
 Note
To listen to the audio output from this connec tion, 
press  AUX / MP3 LINK  repeatedly until ‘AUX 2’ is 
displayed on the display panel. •
Connect to digital socket
COAXIAL OUT
DIGITAL OUT
1   Connect a coaxial cable (not supplied) 
from the  DIGITAL IN-COAXIAL  socket 
on this unit to the COAXIAL/DIGITAL 
OUT socket on the device.
 Note
To listen to the audio output from this connec tion, 
press  AUX / MP3 LINK  repeatedly until ‘DI’ is 
displayed on the display panel. •
Connect portable media player
MP3 LINK
MP3
1 Connect a 3.5mm stereo audio cable (not 
supplied) from the  MP3 LINK socket on 
this unit to the phone socket on your 
portable media player (such as MP3 
player).
 Note
To listen to the audio output from this connec tion, 
press  AUX / MP3 LINK  repeatedly until ‘MP3 LINK’ 
is displayed on the display panel. •
1 _hts 3 366_93-9 8_en g4_fin al8 08.i n 16   1 61_hts3366_93-98_eng4_final808.in16   162008-0 2-2 2   1 0:1 7:4 1 A M2008-02-22   10:17:41 AM
 
						

							
English
EN     17
Connect
Connect USB device
1 Connect the USB device to  USB socket on 
this unit.
 Note
This DVD Home Theatre unit can only play/view 
MP3, WMA , DivX (Ultra) or JPEG  fi les that are 
stored on such devices.
To listen to the audio output from this connec tion, 
press  USB.•
•
Connect to power outlet
 Note
Before connec t to power outlet, ensure that the 
voltage selec tor (at the rear of this unit) is set to the 
local power line voltage. •
1 Connect the power cord from the DVD 
Home Theatre unit and other devices to 
the power outlets when all the required 
connections are done.
1_hts 3 366_93-9 8_en g4_fin al8 08.i n 17   1 71_hts3366_93-98_eng4_final808.in17   172008-0 2-2 2   1 0:1 7:4 1 A M2008-02-22   10:17:41 AM
 
						

							
18      EN
4  Get started   
Prepare the remote control 
1 Push to open the battery compartment 
cover.
2 Insert two batteries type R03 or AAA.  
Match the indications ( +-) inside the 
battery compartment.
3 Close the cover.
 Note
If you are not going to use the remote control for a 
long time, remove the bat teries.•
Control a play source
1 Select the source you wish to control by 
pressing the  DISC, USB, RADIO  or AUX 
/ MP3 LINK  button.
2 Then select the desired function (for 
example í, ë ). 
Navigate through the menu 
1 Point the remote control directly at the 
remote sensor on this unit and select the 
desired function.
2 Use the following buttons on the remote 
control to navigate through the on-screen 
menus.
Button Action
  v V Move up or down.
  
b BMove left or right.
Con fi rm a selection.
Key in numbers. 
1 _hts 3 366_93-9 8_en g4_fin al8 08.i n 18   1 81_hts3366_93-98_eng4_final808.in18   182008-0 2-2 2   1 0:1 7:4 2 A M2008-02-22   10:17:42 AM
 
						

							
English
EN     19
Get started
Find the correct viewing 
channel
1 
Press  2 to turn on the DVD Home 
Theatre unit.
2 Press  DISC to switch to disc mode
3 Turn on the TV and switch it to the 
correct video-in channel.  
You may go to the lowest channel on 
your TV, then press the Channel Down 
button on your TVs remote control 
until you see the Video In channel.
You may press  ° button repeatedly 
on your TVs remote control.
Usually this channel is between the 
lowest and highest channels and may 
be called FRONT, A/V IN, VIDEO, etc..  
    Tips
Refer to your T Vs user manual on how to selec t the 
correc t input on your T V.•
•
•
•
Select menu display language
 Note
You can skip this set ting if this unit is connec ted to a 
HDMI CEC compliant T V. It switches automatically 
to the same OSD menu language as per your T V 
setting.•
1 Press  DISC.
2 Press  OPTIONS .
  [  General Setup  ] menu is displayed.
3 Press B.
4 Press  vV to select  [ OSD Language ]  in 
the menu, then press  B.
General Setup
Auto
Screen Saver
DivX(R) VOD Code Sleep
Display Dim
Disc Lock
OSD Language
Melayu
Русский
ไทย
English
The language options are different 
depending on your country or region.  
It may not correspond to the illustration 
shown here. 
5 Press vV to select a language, then press 
OK .
   Tips
To set the default language for DVD audio and disc 
menu, see chapter ‘Adjust set tings’ -  [ Preferences ] 
for details.•
•
1 _hts 3 366_93-9 8_en g4_fin al8 08.i n 19   1 91_hts3366_93-98_eng4_final808.in19   192008-0 2-2 2   1 0:1 7:4 2 A M2008-02-22   10:17:42 AM
 
						

							
20      EN
Turn on Progressive Scan
When you connect a TV with the component 
video connection (see chapter ‘Connect video 
cables - Option 2: Connect to component 
video socket’ for details), you can set the 
progressive scan output if your TV supports 
progressive scan.
1 Turn on the TV to the correct viewing 
channel for this unit.
2 Press  DISC.
3 Press  OPTIONS .
4 Press V to select  [ Video Setup ]  in the 
menu, then press  B.
Picture Setting
HDMI Setup
TV Display
TV Type
Progressive
Closed Caption On
Off
Video Setup
5 Select [ 
Progressive  ] > [ On ]
, then press 
OK .
   A warning message is displayed.
6 To proceed, select 
[ OK ] in the menu and 
press  OK.
   The progressive setup is complete.
 Note
If a blank /distor ted screen is displayed, wait for 15 
seconds for the auto recover.
If no pic ture displayed, turn of f the progressive scan 
mode as follows:  
1)  Press  Z to open the disc compar tment.  
2)  Press  b.  
3)  Press  AUDIO SYNC .•
•
7 To exit the menu, press  OPTIONS.
8 You can now turn on the progressive scan 
mode on your TV (see the TV user 
manual).
 Note
There are some progressive scan T Vs that are 
not fully compatible with this unit, resulting in an 
unnatur al pic ture when playing back a DVD VIDEO 
disc in the progressive scan mode. In such case, turn 
of f the progressive scan feature on both this unit and 
your T V.•
1_hts 3 366_93-9 8_en g4_fin al8 08.i n 20   2 01_hts3366_93-98_eng4_final808.in20   202008-0 2-2 2   1 0:1 7:4 2 A M2008-02-22   10:17:42 AM