Philips Hts3366 User Manual

English
EN     31
Play
Play from USB device 
This unit can only play/view MP3, WMA, DivX 
(Ultra) or JPEG  fi les that are stored on such 
devices.
1 Connect a digital camera that comply with 
the PTP standard, USB  fl ash drive, or USB 
memory card reader to the  USB socket on 
this unit. 
2 Press  USB.
   A contents menu is displayed.
3 Select a  fi le to play, then press  u. 
For more information, see chapters 
‘Play music, Play photo, Play video’ for 
details.
4 To stop play, press  x  or remove the...

32      EN
Play from radio 
Check if the FM antenna has been connected 
to this DVD Home Theatre unit. If not, connect 
the supplied FM antenna to the FM 75  Ω socket 
and  fi x its ends to the wall.
 Note
For China region only, if you want to receive AM/
MW radio band, connec t the AM/MW loop antenna 
(supplied) to the  AM/MW sockets on this DVD 
Home Theatre unit.•
    Tips
For bet ter FM stereo reception, connec t an ex ternal 
FM antenna (not supplied).
Position the antenna as far away as possible...

English
EN     33
Play
Reinstall all the radio stations
1 Press  RADIO  repeatedly to select ‘FM’ or 
‘AM/MW’ band.
2 Press and hold  PROGRAM until ‘START’ is 
displayed.
   All previously stored radio stations will 
be replaced.
 Note
If no stereo signal is detec ted or less than 5 ( fi ve) 
stations are detec ted during radio installation, 
‘CHECK ANTENNA’ is displayed.•
Search and store radio stations 
individually
1 Press  RADIO  repeatedly to select ‘FM’ or 
‘AM/MW’ band.
2 Press  m M .
...

34      EN
6 Adjust sound
Control the volume
1 
Press  VOL +-  to increase or decrease 
the volume level.
To mute the volume, press  H.
To restore the volume, press  H again 
or press the volume button.
Select surround sound
1 Press  SURROUND  repeatedly to select a 
best surround output that available on the 
disc.
Options Descriptions
PARTY
Ideal for party music. It 
enhanced the stereo channel 
output by duplicating the 
sound output to the centre 
and rear speakers.
MULTI
CHANNELMulti-channel...

English
EN     35
Adjust sound
Adjust microphone volume 
level
1   Connect a microphone (not supplied) to 
MIC  socket on this unit. 
2   Turn on the microphone output. See 
chapter ‘Microphone settings’ for details. 
3 Press  MIC LEVEL .
   ‘LEVEL XX’ is displayed.
4 Adjust the volume control (or press 
VOL  +- repeatedly) to set the level for 
microphone volume.
Sing or speak through the microphone 
to fi nd your desired volume level .
 Note
If the volume control is not used within 10 seconds, it...

36      EN
7 Adjust settings
This section describes the various setting 
options of this unit.  
Symbol Options
[ General Setup ]
 
[ Audio Setup ]
[ Video Setup ]
[ Preferences ]
General setup
1 
Press  OPTIONS .
   [ General Setup ]  menu is displayed.
2 Press B.
3 Select an option, then press  OK.
General Setup
Screen Saver
DivX(R) VOD Code Sleep
Display Dim
Disc Lock
OSD Language
See the explanations of the above 
options in the following pages.
4 Select a setting, then press 
OK.
To return to the...

English
EN     37
Adjust settings
[ Sleep ]
Switch to standby automatically after the 
preset time.
[ Off ]  – disable sleep mode.
[ 15, 30, 45, 60 mins ]  – select the 
count down time before it switches to 
standby.
    Tips
You can direc tly access to sleep timer func tion by 
pressing  SLEEP repeatedly on the remote control 
until the count down time is displayed on the display 
panel. •
[ DivX(R) VOD Code ]
Display the DivX® registration code.
    Tips
Enter this unit’s DivX registr ation code when...

38      EN
[ Speakers Volume ]
When all the speakers are not placed in an 
equal distance from the listening position, 
change the volume level of the speakers so 
that those placed closer to the listening 
position will not sound too loud.
To star t, press OK.
Select a speaker in the menu, then 
press 
b B to adjust the volume level.
Press 
OK to con fi rm and exit.
1.
2.
3.
   
Tips
The test tone is emit ted from the speaker while 
adjusting volume level.•
[ Speakers Delay ]
When the centre or rear...

English
EN     39
Adjust settings
Video setup
1 
Press  OPTIONS .
   [ General Setup ]  menu is displayed.
2 Press V to select   [ Video Setup ] , then 
p ress  B.
3 Select an option, then press  OK.
Video Setup
HDMI Setup
Closed Caption TV Display TV Type
Picture Settings Progressive
See the explanations of the above 
options in the following pages.
4 Select a setting, then press  OK.
To return to the previous menu, press 
BACK .
To exit the menu, press  OPTIONS.
•
•
• [ TV Type ]
Change this setting...

40      EN
[ Picture Setting ]
Select a prede fi ned set of picture colour 
settings or customise your personal setting.
[ Standard ]  – original colour setting.   
[ Bright ]  – vibrant colour setting.
[ Soft ]  – warm colour setting.
[ Personal ]  – customise the colour 
setting.  Set the level of brightness, 
contrast, tint and colour saturation in 
the menu, then press  OK.
[ HDMI Setup ]
When you connect this unit and TV with 
HDMI cable, select the best HDMI setup 
that your TV can support.
[ Wide...