Philips Hts3366 User Manual

English
EN     11
Connect
3 Connect 
This section describes the basic connections 
required for this DVD Home Theatre unit 
before it can be used.  
Basic connections:
Place the unit 
Connect video cables
Connect speaker cables to speakers
Connect speaker to speaker stand 
(for tallboy speakers)
Connect speakers and subwoofer
Connect radio antennas
Connect to power outlet
Optional connections: Connect other devices
Connect audio from TV
Connect audio from cable box/
recorder/game console
Connect...

12      EN
Connect video cables
This section describes how to connect this 
DVD Home Theatre unit to your TV so to 
enable viewing of disc play.
Select the best video connection that your TV 
can support.
Option 1:  Connect to HDMI socket (for a 
HDMI, DVI or HDCP-compliant TV).
Option 2:  Connect to component video 
socket (for a standard TV or Progressive 
Scan TV).
Option 3:  Connect to S-Video socket (for a 
standard TV).
Option 4:  Connect to Video (CVBS) socket 
(for a standard TV).
 Note
You must...

English
EN     13
Connect
1 Connect the component video cables (not 
supplied) from the  Y P
B PR sockets on this 
unit to the component video input sockets 
on your TV.
If a progressive scan TV is used, you 
may turn on the progressive scan mode 
(see chapter ‘Turn on Progressive Scan’ 
for details).
   Tips
The component video input socket on your T V may 
be labelled as Y Pb/Cb Pr/Cr or YUV. 
This type of connec tions provide good pic ture 
quality.•
•
Option 3: Connect to S-Video socket 
S-VIDEO IN...

14      EN
Connect speaker cables to 
speakers
1 Connect the speaker cables to the 
matching colour sockets on the speakers 
(or speaker stands). 
Connect speaker to speaker 
stand
1 Attach the speakers to the speaker stands 
and secure the position with screws.  
Connect speakers and 
subwoofer
FRONT
LEFT FRONT
RIGHT
FRONT
CENTER
SUBWOOFER
REAR LEFT REAR
RIGHT
1 Connect the speakers and subwoofer to 
the matching sockets on this unit.
 Note
Ensure that the colour s of the plugs and sockets are...

English
EN     15
Connect
Connect radio antenna
34
1 2
 Note
AM/MW loop antenna connec tion is only available 
for China region only.•
1 Stand the AM/MW loop antenna 
(supplied) upright to 
fi x its claw into the 
slot.
2 Connect the AM/MW loop antenna to the 
AM/MW  socket. Then place it on a shelf, 
or attach it to a stand or wall.
3 Connect the FM antenna (supplied) to the 
FM75 Ω socket on this unit (for some 
models, this cable has been connected). 
Extend the FM antenna and  fi x its ends to 
the...

16      EN
Connect audio from cable box/
recorder/game console
You can choose to connect to analogue or 
digital socket depending on the device 
capabilities.
Connect to analogue sockets
AUX 2
1   Connect an audio cable (not supplied) 
from the  AUDIO IN-AUX2  sockets on 
this unit to the AUDIO OUT sockets on 
the device. 
 Note
To listen to the audio output from this connec tion, 
press  AUX / MP3 LINK  repeatedly until ‘AUX 2’ is 
displayed on the display panel. •
Connect to digital socket
COAXIAL...

English
EN     17
Connect
Connect USB device
1 Connect the USB device to  USB socket on 
this unit.
 Note
This DVD Home Theatre unit can only play/view 
MP3, WMA , DivX (Ultra) or JPEG  fi les that are 
stored on such devices.
To listen to the audio output from this connec tion, 
press  USB.•
•
Connect to power outlet
 Note
Before connec t to power outlet, ensure that the 
voltage selec tor (at the rear of this unit) is set to the 
local power line voltage. •
1 Connect the power cord from the DVD 
Home...

18      EN
4  Get started   
Prepare the remote control 
1 Push to open the battery compartment 
cover.
2 Insert two batteries type R03 or AAA.  
Match the indications ( +-) inside the 
battery compartment.
3 Close the cover.
 Note
If you are not going to use the remote control for a 
long time, remove the bat teries.•
Control a play source
1 Select the source you wish to control by 
pressing the  DISC, USB, RADIO  or AUX 
/ MP3 LINK  button.
2 Then select the desired function (for 
example í, ë )....

English
EN     19
Get started
Find the correct viewing 
channel
1 
Press  2 to turn on the DVD Home 
Theatre unit.
2 Press  DISC to switch to disc mode
3 Turn on the TV and switch it to the 
correct video-in channel.  
You may go to the lowest channel on 
your TV, then press the Channel Down 
button on your TVs remote control 
until you see the Video In channel.
You may press  ° button repeatedly 
on your TVs remote control.
Usually this channel is between the 
lowest and highest channels and may 
be...

20      EN
Turn on Progressive Scan
When you connect a TV with the component 
video connection (see chapter ‘Connect video 
cables - Option 2: Connect to component 
video socket’ for details), you can set the 
progressive scan output if your TV supports 
progressive scan.
1 Turn on the TV to the correct viewing 
channel for this unit.
2 Press  DISC.
3 Press  OPTIONS .
4 Press V to select  [ Video Setup ]  in the 
menu, then press  B.
Picture Setting
HDMI Setup
TV Display
TV Type
Progressive
Closed...