Philips Hts3270 User Manual

							31
   
 
 
 
 
 
 
Play from USB device
 
 
This Home Theater System plays/views MP3, 
WMA, DivX (Ultra) or JPEG  les on the 
following USB devices:
   
 
 
digital camera that complies with the PTP  • 
standard
   
 
 
 ash drive • 
   
 
 
memory card reader • 
   
 
 
HDD (ex ternal power source needed) • 
 
 
 
 
 
  
 
 
 
 
 
 
1  Connect a USB device to the   
 
 (USB) 
 
jack.
   
 
 
2 Press  USB 
.
   
 
 
A contents menu is displayed.   »
 
 
 
 
 
 
3  Select a  le to play, then press   
.
   
 
 
Play star ts.   »
   
 
 
 
 
 
 
To stop play, press  • 
 
 or remove the 
USB device.
  Note
 
If the device does not  t into the USB jack , connec t it   •
through a USB ex tension cable.
   
If you connec t a multiple USB card/device reader, 
  •
only one card/device can be accessed. 
/
 
 
 
 
Control photo play
 
 
 
 
1  Play photo slideshow.
 
 
 
 
2  Use the remote control to control the 
photo. 
  Button  Action
 
  
Skips to the previous photo.
   
 
Skips to the nex t photo.
   
 
Rotates the photo clock wise.
   
 
Rotates the photo anti-
clockwise.
   
ZOOM 
Zooms in or out of the 
picture.
   
Play pause in zoom mode.
   
 
Stops play.
 
 
 
 
 
Play musical slideshow
 
 
Play MP3/ WMA music  les and JPEG 
photo  les simultaneously to create musical 
slideshow. The MP3/ WMA and JPEG  les 
must be stored on the same disc or USB 
device.
   
 
 
1  Play MP3/ WMA music. 
 
 
 
 
2  Navigate to the photo folder/album and 
press  OK 
 to star t slideshow play.
   
 
 
Slideshow begins and continues till the    »
end of the photo folder or album. 
   
 
 
Audio continues to play till the end of    »
the disc.
   
 
 
 
 
 
 
To stop slideshow play, press  • 
 
.
   
 
 
To stop music play, press   • 
 
 again.
English
EN
Play
1_hts3270-3377-3377W_12_en3.indd   312009-03-30   11:44:36 AM
 
						

							32
Play from radio
   
Check if the FM antenna has been connected 
to this Home Theater System. If not, connect 
the supplied FM antenna to the  FM75  
 
 
 jack 
and  x its ends to the wall.
   
 
  
 
Tip
 
For bet ter FM stereo reception, connec t an ex ternal   •
FM antenna (not supplied).
   
Position the antenna as far away as possible from 
  •
your T V, VCR or other r adiation source to prevent 
interference.
   
 
 
 
First time tuning
 
 
When you access to radio mode for the  rst 
time, follow the instructions to install the radio 
stations. 
   
 
 
1 Press  RADIO 
.
   
 
 
’AUTO INSTALL ... PRESS PLAY’ is    »
displayed. 
   
 
 
 
 
2 Press   
.
   
 
 
All detected radio stations are stored.   »
   
 
 
Once complete, it tunes to the  rst    »
preset radio station.
   
 
 
 
 
 
 
To stop auto tuning, press   • 
 
.
 
Note
 
This Home Theater System can store up to a   •
maximum of 40 r adio stations.
   
If auto installation is not ac tivated or less than 5 r adio 
  •
stations are stored, you will be prompted to install 
the r adio stations again.
FM (75 Ω) 
ANTENNA
   
 
 
 
 
Play from portable media 
player
   
Simply connect your por table media player (e.g. 
MP3 player) to this Home Theater System to 
enjoy superb sound quality from your music 
collections.
   
 
  
 
 
 
 
 
 
1  Connect a 3. 5mm stereo audio cable 
(not supplied) from the  MP3 LINK 
 jack 
on this Home Theater System to the 
‘headphone’ jack on the por table media 
player.
   
 
 
2 Press  AUDIO SOURCE 
 repeatedly until 
‘MP3 LINK’ is displayed.
   
 
 
3  Star t play on your por table media player.
   
 
 
To stop play, press   • STOP 
 on the 
por table media player.
  Note
 
Control playback is only possible on the por table   •
media player.
   
Stop play on the por table media player before you 
  •
switch to other play media /source.
 
 
 
 
 
 
MP3
EN
1_hts3270-3377-3377W_12_en3.indd   322009-03-30   11:44:43 AM
 
						

							33
Search and store radio stations 
individually
   
 
 
1 Press  RADIO 
.
 
 
 
 
2 Press   
 /   
.
   
 
 
It star ts searching until a radio station    »
is detected.
   
 
 
 
 
3  Repeat step 2 until you tune to the radio 
station you wish to store.
   
 
 
To  netune the radio frequency,  • 
press  
   /   
.
 
 
 
 
 
 
4 Press  PROGRAM 
.
   
 
 
The preset station number blinks.   »
   
 
 
If no action is carried out within 20    »
seconds after the above step, it exits 
the preset mode.
   
 
 
 
 
5 Press   
 /  
 (or the  Numeric buttons 
) to 
select a preset number to store.
   
 
 
6 Press  PROGRAM 
 to con rm.
 
Note
 
If the FM r adio station tr ansmits RDS (Radio Data   •
System) data, the name of the r adio station is 
displayed.
   
 
 
 
Listen to radio
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Use the remote control to control the 
radio. 
  Button  Action
 
  
   
Selects a preset radio station.
   
 
  
Tunes the radio frequency up or 
down.
   
 
Press and hold this button to 
erase the current radio station 
from the preset list.
   
The preset number for other 
radio stations remain unchanged.
   
 
 
 
Reinstall all the radio stations
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Press and hold  PROGRAM 
 for more than 
5 seconds.
   
 
 
All previously stored radio stations are    »
replaced.
  Note
 
Check the r adio antenna connec tion if no stereo   •
signal is detec ted or less than 5 stations are detec ted 
during r adio installation.
   
 
 
 
Play
English
EN
1_hts3270-3377-3377W_12_en3.indd   332009-03-30   11:44:47 AM
 
						

							34
6  Select the audio track, then press  OK 
.
   
 
 
To select another track, repeat step  • 
6.
   
 
 
To select all tracks, select   • [Select 
All] 
 in the menu and press  OK 
. 
   
 
 
To deselect all tracks, select  • 
  [Deselect all] 
 in the menu and press 
  OK 
.
 
 
 
 
 
 
7 Select  [Start] 
 in the menu to conver t, 
then press  OK 
. 
   
 
 
Once complete, a new folder is    »
created automatically in the USB 
device to store all the new MP3  les.
   
 
 
 
 
 
 
To exit the menu, select   • [Exit] 
 and 
press  OK 
.
 
Note
 
While you conver t, do not press any but tons.   •
 
 
DTS CDs and copy-protec ted CDs cannot be   •
conver ted.
   
Write-protec ted or password-protec ted USB 
  •
devices cannot be used to store MP3  les. 
 
 
 
 
 
 
 
6 Advanced 
features
   
 
 
Create MP3 audio  les
 
 
You can conver t audio CDs into MP3 audio 
 les with this Home Theater System. The 
created MP3 audio  les are saved in your USB 
device.
  Option  Description
 
 
[Speed] 
Selects the write-to- le speed.
   
If  [Normal] 
 speed is selected, 
music play can be heard while 
creating the MP3  le.
   
[Bitrate] 
Selects the quality level. Higher 
bitrate for better sound quality 
and bigger  le size.
   
Default setting is  [128kbps] 
.
 
 
 
 
 
 
 
 
 
 
 
1  Inser t an audio CD. (CDDA /HDCD)
 
 
 
 
2  Connect the USB  ash drive to   
 
(USB) jack on this Home Theater System.
   
 
 
3  During disc play, press  CREATE MP3 
. 
 
 
 
 
4  Select the conversion options in the 
  [OPTIONS] 
 panel, then press  OK 
.
 
 
 
 
5 Press   
 to access the  [TRACK] 
 panel.
 
 
 
 
CREATE MP3
OPTIONSTRACK
Bitrate         128kbps
SUMMARY
Select Track     0
              
Start ExitSelect All
Deselect All
Time                 00:00Track01          04:14
Track02          04:17
Track03          03:58
Track04          04:51
Track05          03:53
Track06          04:09
Track07          04:38 
Speed         Normal
EN
1_hts3270-3377-3377W_12_en3.indd   342009-03-30   11:44:51 AM
 
						

							35
   
 
 
 
Select a preset sound
 
 
 
 
 
 
 
1 Press  SOUND 
 repeatedly to select the 
sound effect that most suitable for the 
video or music you play.
  Video/Music   Description
 
 
ACTION 
 / 
  ROCK  Enhance low and 
high range for 
great sounding 
movie effects and 
atmosphere. Great 
for action movies and 
rock/pop music.
   
CONCERT 
 
 
/ 
  CLASSIC  Flat and pure sound 
mode. Ideal for 
listening to classical 
music and watching 
live concer t disc.
   
DRAMA 
 / 
  JAZZ  Clear mid and high 
range. Recreates the 
atmosphere of a live 
club with the ar tist 
just in front of you. 
Good for jazz music 
and watching dramas.
   
SPORTS 
Moderate mid range 
and surround effects 
for clear vocals and 
the atmosphere of a 
live spor ts venue. It 
is also ideal for video 
gaming.
   
NIGHT 
Dynamically 
controlled sound 
mode suitable 
for watching 
movies at night or 
for nonintrusive 
background music.
   
 
 
 
 
 
7 Adjust sound
 
 
 
 
Control the volume
 
 
 
 
1 Press  VOL +/- 
 to increase or decrease 
the volume.
   
 
 
To mute, press   • 
 
.
   
 
 
To restore the volume, press   • 
 
 again 
or press  VOL + 
.
 
 
 
 
 
 
 
 
 
Select surround sound
 
 
 
 
 
 
 
1 Press  SURR 
 repeatedly to select the best 
surround output that’s available on the 
disc.
   
Option   
Description
 
 
5 CH 
STEREO  Enhances the stereo channel 
output by duplicating the 
sound output to the center 
and rear speakers. Ideal for 
par ty music.
   
MULTI-
CHANNEL/
DPLII  Multi-channel surround 
output: DTS (Digital Theater 
Systems), Dolby Digital, and 
Dolby Pro Logic II.
   
STEREO 
Stereo sound from two front 
speakers.
Adjust sound
English
EN
1_hts3270-3377-3377W_12_en3.indd   352009-03-30   11:44:55 AM
 
						

							36
General setup
   
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
.
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •
following pages.
 
 
 
 
 
OSD Language
Sleep Timer Screen Saver Disc Lock EasyLink Setup
Display Dim
General Setup
DivX(R) VOD Code
   
 
 
 
 
8 Adjust settings
 
 
You can customise various kinds of settings as 
you prefer. Refer to the following instructions to 
navigate through the setup menus. 
  Symbol  Options
 
 
 
 
[General Setup]
   
 
 
[Audio Setup]
 
 
 
 
[Video Setup]
 
 
 
 
[Preferences]
 
Note
 
If the setup option is gr ayed out, it means the set ting   •
cannot be changed at the current state.
 
 
 
 
EN
1_hts3270-3377-3377W_12_en3.indd   362009-03-30   11:44:57 AM
 
						

							37
   
 
 
 
[Disc Lock] 
   
Sets play restriction for a speci c discs. 
Before you star t, place the disc in the disc 
compar tment (maximum 40 discs can be 
locked).
   
 
 
  • [Lock] 
 – Restricts access to the current 
disc. Once activated, a password is 
needed to unlock and play the disc. 
   
 
 
  • [Unlock] 
 – Plays all discs.
 
Tip
 
You can set or change the password (see ‘Adjust   •
set tings’ > ‘Preferences’ >  [Password] 
).
 
 
 
 
 
[Display Dim] 
   
Changes the brightness level of the display 
panel on this Home Theater System.
   
 
 
  • [10 0%]  
– Normal brightness.
   
 
 
  • [70%]  
– Medium brightness.
   
 
 
  • [4 0%] 
 – Dimmest display.
 
 
 
 
  
 
 
 
 
 
[OSD Language] 
   
Selects the default on-screen menu language.
 
 
  
 
 
 
 
 
[Screen Saver] 
   
Turns off or on the screen saver mode. Helps 
to protect the T V screen from being damaged 
due to over exposure to a static image for too 
long.
   
 
 
  • [On] 
 – Sets the screen saver to appear 
af ter 5 minutes of inactivity (for example, 
in pause or stop mode).
   
 
 
  • [Of f ] 
 – Disable screen saver mode.
 
 
 
 
  
 
 
 
 
 
[Sleep Timer] 
   
Switches to standby automatically af ter the 
preset time.
   
 
 
  • [15 mins] 
,  [30 mins] 
,  [45 mins] 
,  [60 mins] 
 
– Selects the count down time before 
the Home Theater System switches to 
standby.
   
 
 
  • [Of f ] 
 – Disables sleep timer mode.
 
 
 
 
  
[EasyLink Setup] 
   
If this Home Theater System is connected 
to HDMI CEC compliant T V/devices, all 
connected devices can respond to the 
following commands simultaneously:
  Option  Description
 
 
[EasyLink] 
Turns off or on all EasyLink 
features.
   
To disable this feature, select 
  [Of f ] 
.
   
[One 
To u c h  
Play]  When you press  PLAY 
, the 
T V and Home Theater System 
are turned on. Disc play star ts 
if there is a disc in the Home 
Theater System. 
   
To disable this feature, select 
  [Of f ] 
.
   
[One 
To u c h  
Standby]  If you press and hold  STANDBY 
 
for at least 3 seconds, the Home 
Theatre System and all the HDMI 
CEC devices switch to standby 
simultaneously. 
   
To disable this feature, select 
  [Of f ] 
.
   
[System 
Audio 
Control]  When you play audio that is 
routed from the connected 
devices, this Home Theater 
System switches to the 
corresponding audio source 
automatically.
   
To enable this feature, select 
  [On] 
. Then proceed to  [Audio 
Input Mapping] 
 to scan and map 
all the connected devices.
   
[Audio 
Input 
Mapping]  When you map the audio 
input correctly, this Home 
Theater System switches to the 
audio from the played device 
automatically.
  Note
 
You must turn on the HDMI CEC oper ations on   •
the T V/devices before you can enjoy the EasyLink 
controls. See the T V/devices manual for details.
   
Philips does not guar antee 10 0% interoper ability 
  •
with all HDMI CEC compliant devices.
Adjust settings
English
EN
1_hts3270-3377-3377W_12_en3.indd   372009-03-30   11:45:04 AM
 
						

							38
Audio setup
   
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Audio Setup] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •
following pages.
 
 
 
 
 
CD Upsampling Speakers Delay Speakers Volume
HDMI Audio
Audio Setup
Audio Sync
   
 
 
 
[DivX(R) VOD Code] 
   
Displays the DivX® registration code.
 
Tip
 
Enter this Home Theater System DivX registr ation   •
code when you rent or purchase video from w w w.
div x.com/vod. The DivX videos rented or purchased 
through the DivX® VOD ( Video On Demand) 
ser vice can be played only on the device to which it 
is registered.
   
 
 
 
 
EN
1_hts3270-3377-3377W_12_en3.indd   382009-03-30   11:45:06 AM
 
						

							39
[CD Upsampling] 
   
Conver ts the music CD to a higher sampling 
rate using sophisticated digital signal 
processing for better sound quality. 
   
 
 
  • [Of f ] 
 – Disables CD-upsampling.
   
 
 
  • [88.2kHz (X2)] 
 – Conver ts the sampling 
rate of the CDs twice as high as the 
original rate. 
  Note
 
CD upsampling is only available in stereo mode.  •
 
 
 
 
 
[Audio Sync] 
   
Sets the default delay time for audio output 
when you play a video disc.
  1) To star t, press  OK 
.
   
2) Select a speaker delay in the menu, then 
press  
   to set the delay time.
   
3) Press  OK 
 to con rm and exit.
   
 
 
 
  [Speakers Volume] 
   
Sets the volume level of each speaker to get 
the ideal audio balance.
  1) To star t, press  OK 
.
   
2) Select a speaker in the menu, then press  
 
 to adjust the volume level.
   
3) Press  OK 
 to con rm and exit.
 
Note
 
The test tone is emit ted from the speaker which you   •
adjust.
 
 
 
 
 
[Speakers Delay] 
   
Sets the delay time for the center and rear 
speakers if they are placed closer to the 
listening position, so that the sound output 
from all speakers reach the listening position 
at the same time. 
  1) To star t, press  OK 
.
   
2) Select a speaker in the menu, then press  
 
 to set the delay time.
   
3) Press  OK 
 to con rm and exit.
 
Note
 
Allow 1ms set ting for ever y 1 foot distance between   •
the speaker and the listening position.
 
 
 
 
 
[HDMI Audio] 
   
Selects the HDMI audio setting when you 
connect this Home Theater System and the 
T V with a HDMI cable.
   
 
 
  • [On] 
 – Allows audio output through the 
T V and the speaker system. If the audio 
format on the disc is not suppor ted, it 
will be downmixed to two-channel sound 
(linear-PCM). 
   
 
 
  • [Of f ] 
 – Disables audio output from the 
T V. The sound is only output through the 
speaker system.
   
 
 
  
 
 
 
 
 
Adjust settings
English
EN
1_hts3270-3377-3377W_12_en3.indd   392009-03-30   11:45:11 AM
 
						

							40
   
 
 
 
[TV System] 
   
Change this setting if the video does not 
appear correctly. By default, this setting 
matches the most common setting for T Vs in 
your country.
   
 
 
  • [PAL] 
 – For PAL-system T V.
   
 
 
  • [NTSC] 
 – For NTSC-system T V.
   
 
 
  • [Multi] 
 – For T V that is compatible with 
both PAL and NTSC .
   
 
 
  
 
 
 
 
 
[TV Display] 
   
Selects one of the following display formats:
 
 
 
 
 
 
 
  • [4:3 Pan Scan] 
 – For 4:3 screen T V: full-
height display with the trimmed sides.
   
 
 
  • [4:3 Let ter Box] 
 – For 4:3 screen T V: 
wide-screen display with black bars on 
the top and bottom of the screen.
   
 
 
  • [16:9 Wide Screen] 
 – For wide-screen 
T V: display ratio 16:9.
   
 
 
  
 
 
 
 
 
[Screen Fit] 
   
Fits the picture format to the T V screen to 
enjoy watching disc play in full screen mode.
   
 
 
  • [Select] 
 – Displays various types of full 
screen format, press  OK 
 to select a 
suitable picture format that best  ts to 
the T V screen.
   
 
 
  • [Of f ] 
 – Returns to normal screen display.
 
 
 
 
  
 
 
 
 
 
[Picture Setting] 
   
Selects a prede ned set of picture color 
settings or customise the personal setting.
   
 
 
  • [Standard] 
 – Original color setting.
   
 
 
  • [Bright] 
 – Vibrant color setting.
   
 
 
  • [Soft] 
 – Warm color setting.
   
 
 
  • [Personal] 
 – Customises the color set ting. 
Set the level of brightness, contrast, 
sharpness/tint and color saturation, then 
press  OK 
.
 
 
 
 
  
4:3 Letter Box (LB) 4:3 Pan Scan (PS)
16:9 (Wide Screen)
Video setup
   
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Video Setup] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •
following pages.
Video Setup
Picture Setting
Closed Caption HDMI Setup TV Display TV System
Screen Fit
EN
1_hts3270-3377-3377W_12_en3.indd   402009-03-30   11:45:15 AM