Philips Hts3270 User Manual
Have a look at the manual Philips Hts3270 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11
Place the Home Theater
System
Place the Home Theater System where it •
cannot be pushed, pulled over or knocked
down. Do not place it in an enclosed
cabinet.
Be sure that you have full access to the •
power cord for easy disconnection of the
Home Theater System from the power
supply.
Wireless receiver is for HTS3377 W only.
Different set of speakers for HTS3270. (see
‘Speci cations’ > ‘Speakers’).
1 Place this Home Theater System near the
TV.
2 Place the speakers system at normal
listening ear-level and directly parallel to
the listening area.
3 Place the subwoofer at the corner of the
room or at least three feet away from the
TV.
4 Place the wireless receiver (for
HTS3377 W only) near the AC outlet and
in between the rear speakers. Position
the wireless receiver (with Philips logo)
directly parallel to the Home Theater
System.
Tip
To avoid magnetic inter ference or unwanted noise, •
never place this Home Theater System too close to
any r adiation devices.
FRONT
RIGHT
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
SUBWOOFER
3 Connect
Make the following connections to use your
Home Theater System.
Basic connections:
Video •
Speakers and subwoofer •
Wireless receiver (for HTS3377 W only) •
Power •
Optional connections:
Radio antenna •
Audio •
Audio from T V •
Audio from cable box /recorder/ •
game console
Other devices •
Por table media player •
USB device •
Note
Refer to the type plate at the back or bot tom of the •
produc t for identi cation and supply r atings.
Before you make or change any connec tions, ensure
•
that all the devices are disconnec ted from the power
outlet.
Tip
Dif ferent types of connec tor s may be used to •
connec t this produc t to your T V, depending on
availability and your needs. A comprehensive
inter ac tive guide to help you connec t your produc t is
available at www.connectivityguide.philips.com.
Connect
English
EN
1_hts3270-3377-3377W_12_en3.indd 112009-03-30 11:43:11 AM
12 Option 2: Connect to the HDMI jack 1 Connect an HDMI cable (not supplied) to the HDMI OUT jack on this Home Theater System and the HDMI input jack on the T V. Note If your device suppor ts HDMI CEC , you can control • compliant devices with a single remote control. (see ‘Get star ted’ > ‘ Use Philips EasyLink ’). Tip If the T V has a DVI connec tion only, connec t via • a HDMI/DVI adaptor. Connec t an audio cable for sound output. You can optimise the video output. (see ‘Adjust • set tings’ > ‘ Video setup’ > [HDMI Setup] ). This type of connec tion provides the best pic ture • quality. HDMI OUT HDMI IN Connect video cables Connect this Home Theater System to TV to view disc play. Select the best video connection that the TV can suppor t. Option 1: Connect to the SCART jack • Option 2: Connect to the HDMI jack (for • a HDMI, DVI or HDCP-compliant T V ). Option 3: Connect to the video (CVBS) • jack (for a standard T V ). Note You must connec t this Home Theater System • direc tly to a T V. Option 1: Connect to the SCART jack 1 Connect a scar t cable to the SCART TO TV jack on this Home Theater System and the SCART input jack on the T V. Note Scar t connec tion allows T V ’s audio output through • the speaker s. Press AUDIO SOURCE repeatedly until ‘ SCART IN’ is displayed on the display panel. This type of connec tion provides good pic ture • quality. SCART TO TV SCART EN 1_hts3270-3377-3377W_12_en3.indd 122009-03-30 11:43:13 AM
13 Connect speaker cables to speakers For the rear speakers of HTS3377 and HTS3377W only 1 Connect the speaker cables to the matching color jacks on the speakers (or speaker stands). Connect speaker to speaker stand For the rear speakers of HTS3377 and HTS3377W only 1 Attach the speakers to the speaker stands and secure the position with screws. Option 3: Connect to the Video (CVBS) jack 1 Connect a composite video cable (not supplied) to the VIDEO jack on this Home Theater System and the VIDEO input jack on the T V. Note The video input jack on the T V might be labeled as • A / V IN, VIDEO IN, COMPOSITE or BASEBAND. This type of connec tion provides standard pic ture • quality. VIDEO VIDEO OUT VIDEO IN English EN Connect 1_hts3270-3377-3377W_12_en3.indd 132009-03-30 11:43:17 AM
14 For HTS3270 and HTS3377 (HTS3270 has a different set of speakers) 1 Connect the speakers and subwoofer to the matching jacks on the Home Theater System. Note Ensure that the color s of the plugs and jack s are • matched. Connect speakers and subwoofer For HTS3377 W only EN 1_hts3270-3377-3377W_12_en3.indd 142009-03-30 11:43:24 AM
15 Connect radio antenna 1 Connect the FM antenna to the FM75 jack on this Home Theater System (for some models, this cable is already connected). 2 Ex tend the FM antenna and x its ends to the wall. Tip For bet ter FM stereo reception, connec t to an • ex ternal FM antenna. FM (75 Ω) ANTENNA Connect rear speakers to wireless receiver For the rear speakers of HTS3377W only 1 Connect the rear lef t and right speakers to the matching jacks at the bottom of the wireless receiver. English EN Connect 1_hts3270-3377-3377W_12_en3.indd 152009-03-30 11:43:30 AM
16 Connect audio from cable box/ recorder/game console You can choose to connect to analog or digital jack depending on the device capabilities. Connect to analog jacks 1 Connect the audio cables (not supplied) to the AUDIO IN-AUX jacks on the Home Theater System and the AUDIO output jacks on the device. Note To listen to the audio output from this connec tion, • press AUDIO SOURCE repeatedly until ‘AUX’ is displayed on the display panel. AUDIO OUT AUX AUDIO IN Connect audio cables/other devices Route the audio from other devices to this Home Theater System to enjoy audio play with multi-channel surround capabilities. Connect audio from TV (also used for EasyLink control) 1 Connect the audio cables (not supplied) to the AUDIO IN-AUX jacks on the Home Theater System and the AUDIO output jacks on the T V. Note To listen to the audio output from this connec tion, • press AUDIO SOURCE repeatedly until ‘AUX’ is displayed on the display panel. AUDIO OUT AUX AUDIO IN EN 1_hts3270-3377-3377W_12_en3.indd 162009-03-30 11:43:33 AM
17 Connect to optical jack 1 Connect an optical cable (not supplied) to the OPTICAL DIGITAL-IN jack on the Home Theater System and the OPTICAL /SPDIF output jack on the device. Note To listen to the audio output from this connec tion, • press AUDIO SOURCE repeatedly until ‘OPTI IN’ is displayed on the display panel. DIGITAL INOPTICAL DIGITAL OUTOPTICAL Connect to coaxial jack 1 Connect a coaxial cable (not supplied) to the COA XIAL DIGITAL-IN jack on the Home Theater System and the COA XIAL /DIGITAL output jack on the device. Note To listen to the audio output from this connec tion, • press AUDIO SOURCE repeatedly until ‘COA X IN’ is displayed on the display panel. COAXIAL DIGITAL OUT DIGITAL IN English EN Connect 1_hts3270-3377-3377W_12_en3.indd 172009-03-30 11:43:39 AM
18 Connect power cord Warning Risk of produc t damage! Ensure that the power • supply voltage corresponds to the voltage printed on the back or the under side of the Home Theater System. 1 Connect the power cords from the Home Theater System, wireless receiver and other devices to the power outlets when all the required connections are done. The wireless indicator on the wireless » receiver light up. (Only applicable for HTS3377W) The Home Theater System is ready to » be set up for use. Note For optimum wireless reception, ensure that the • wireless receiver is not obstruc ted by any objec ts. Connect portable media player 1 Connect a 3. 5mm stereo audio cable (not supplied) to the MP3 LINK jack on this Home Theater System and the phone jack on the por table media player (such as MP3 player). Note To listen to the audio output from this connec tion, • press AUDIO SOURCE repeatedly until ‘MP3 LINK’ is displayed on the display panel. Connect USB device 1 Connect the USB device to USB jack on this Home Theater System. Note This Home Theater System can only play/view MP3, • WMA , DivX (Ultr a) or JPEG les that are stored on such devices. Press •USB to access the content and play the les. MP3 EN 1_hts3270-3377-3377W_12_en3.indd 182009-03-30 11:43:41 AM
19 Control a play source 1 Press RADIO , USB or DISC button to select the source you wish to control. 2 Select the desired function (for example , ). Navigate through the menu 1 Point the remote control directly at the remote sensor on the Home Theater System and select the desired function. 2 Press the following buttons on the remote control to navigate through the on-screen menus. Button Action Move up or down Move lef t or right OK Con rm a selection Enter numbers 4 Get started Insert the remote control batteries 1 Slide the batter y cover off the back of the remote control. 2 Inser t the 2 supplied batteries (A A A). Be sure the + and - ends of the batteries line up with the markings inside the case. 3 Slide the cover back into position. Note Do not mix bat teries (old and new or carbon and • alkaline, etc.). Remove bat teries if they are exhausted or if the • remote control is not to be used for a long time. Bat teries contain chemical substances, they should • be disposed of f properly. Get started English EN 1_hts3270-3377-3377W_12_en3.indd 192009-03-30 11:43:44 AM
20
Select menu display language
Note
Skip this set ting if this Home Theater System is •
connec ted to a HDMI CEC compliant T V. It switches
automatically to the same OSD menu language as
per your T V set ting.
1 Press DISC
.
2 Press
SETUP
.
»[General Setup]
menu is displayed.
3 Press
.
4 Press
to select [OSD Language]
in
the menu, then press
.
The language options are different •
depending on your countr y or
region. It may not correspond to the
illustration shown here.
5 Press
to select a language, then press
OK
.
Tip
You can set the default language for DVD disc menu •
(see ‘Adjust set tings’ > ‘Preferences’ > [Disc Menu]
).
General Setup
Screen Saver Disc Lock EasyLink Setup
Display Dim
DivX(R) VOD Code Sleep Timer
Dansk
Nederlands
English
Suomi
Français
Deutsch
Italiano
OSD LanguageAuto
Find the correct viewing
channel
1 Press
to turn on the Home Theater
System.
2 Press DISC
to switch to disc mode.
3 Turn on the T V and switch to the correct
video-in channel in one of the following
ways:
Go to the lowest channel on your •
T V, then press the Channel Down
button until you see the Philips
screen.
Press •
SOURCE
button repeatedly
on the remote control of your T V.
Tip
The video-in channel is between the lowest and •
highest channels and may be called FRONT, A / V IN,
VIDEO, HDMI etc. See the T V user manual on how
to selec t the correc t input on the T V.
EN
1_hts3270-3377-3377W_12_en3.indd 202009-03-30 11:43:54 AM