Philips Hts3270 User Manual

							21
   
 
 
2 Press   
  
 to change the volume level, 
then press  OK 
.
   
 
 
The test tone is emitted from the    »
speaker.
   
 
 
 
 
 
 
Repeat the above setting for other  • 
speakers until all the speakers output 
level sounds equally balance.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
 
  
 
 
 
 
 
To set the output delay time (center and rear 
speakers only) 
 
 
  
 
 
 
 
1 Select  [Speakers Delay] 
 in the menu, 
then press  
  .
 
 
  
 
 
 
 
2 Press   
  
 to set the delay time, then press 
  OK 
.
   
 
 
Repeat the above setting for other  • 
speakers until the sound output from 
different speakers reach the listening 
position at the same time. 
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Tip
 
Set a longer delay time if the center speaker or rear   •
speaker is closer to the listening position than the 
front speaker.
   
Allow 1ms set ting for ever y 1 foot distance between 
  •
the speaker and the listening position.
Speakers Distance Setup
Center
Rear Left
Rear Right0MS
0MS
0MS
   
 
 
 
 
Change speaker settings
 
 
Ideally, the distance between listening position 
and all the speakers should be the same. If not, 
change the speaker settings based on their 
distance from the listening position to obtain 
the best possible surround sound.
   
 
  
 
 
 
 
 
 
1 Press  DISC 
.
 
 
 
 
2 Press   
 
 SETUP 
.
 
 
 
 
3 Press   
 to select  [Audio Setup] 
 in the 
menu, then press  
  .
   
 
 
If the speaker setup option is not  • 
accessible, press 
   twice before you 
press  
   SETUP 
 
.
 
 
  
 
 
 
 
 
 
 
To set the speakers level 
 
 
  
 
 
 
 
1 Select  [Speakers Volume] 
 in the menu, 
then press  
  .
 
 
  
CD Upsampling Speakers Delay Speakers Volume
HDMI Audio
Audio Setup
Audio Sync
Speakers Volume Setup
Front Left
Front Right
Center
Subwoofer
Rear Left
Rear Right0dB
0dB
0dB
0dB
0dB
0dB
English
EN
Get started
1_hts3270-3377-3377W_12_en3.indd   212009-03-30   11:43:56 AM
 
						

							22
   
EasyLink 
   
You can turn off or turn on all EasyLink 
features.
One-touch play  
   
When you connect your Home Theater 
System to devices that suppor t one-touch 
play, you can control your Home Theater 
System and the devices with one remote 
control. For example, when you press Play on 
your Home Theater System remote control, 
your T V automatically switches to the 
correct channel to show the DVD content. 
   
To enable One-touch play, a video disc must 
be placed in the disc compar tment before 
operation.
One-touch standby 
   
When you connect your Home Theater 
System to devices that suppor t standby, you 
can use your Home Theater System remote 
control to put your Home Theater System 
and all connected HDMI devices in standby 
mode. You can per form one-touch standby 
using the remote control from any of the 
connected HDMI devices.
   
System Audio Control 
   
When you connect your Home Theater 
System to HDMI CEC compliant devices, 
your Home Theater System can switch 
automatically to play audio from the 
connected device. 
   
To use one-touch audio, you must map the 
audio input from the connected device to 
your Home Theater System.
   
Audio Input Mapping 
   
When you map the audio input correctly, this 
Home Theater System switches to the audio 
from the played device automatically.   
 
 
 
 
Use Philips EasyLink
 
 
Your Home Theater System suppor ts 
Philips EasyLink, which uses the HDMI CEC 
(Consumer Electronics Control) protocol. 
EasyLink-compliant devices that are connected 
through HDMI connectors can be controlled by 
a single remote control. 
  Note
 
Philips does not guar antee 10 0% interoper ability   •
with all HDMI CEC devices.
 
 
 
 
1  Turn on the HDMI CEC operations on 
the T V and other connected devices. See 
T Vs/devices manual for details.
   
 
 
2  You can now enjoy the following Philips 
EasyLink controls.
EN
1_hts3270-3377-3377W_12_en3.indd   222009-03-30   11:44:06 AM
 
						

							23
   
  
 
 
For example, if the TV audio is 
connected to the  AUX 
 jack on this 
Home Theater System, select  [Aux] 
 
and map with the TV (brand name) at 
the right panel.
   
 
 
 
 
6  Select the audio input of this Home 
Theater System that is used to connect 
to other HDMI device (e.g. AUX , SCART 
IN), then press  
  . 
 
 
 
 
7  Select the correct connected device, then 
press  OK 
.
   
 
 
Repeat steps 5–7 to map other    »
connected devices.
   
 
 
 
 
8   Press   
 
 SETUP 
 to exit the menu.
   
 
 
 
 
 
 
Aux
Optical In
Coaxial In
Audio Input Mapping
Scart In[TV]
other (Non-HDMI) [DVD 3400]
   
 
 
Map the audio inputs to the 
connected devices
  Note
 
Before you star t, ensure that the audio output of   •
the HDMI T V and other HDMI devices have been 
connec ted to the audio input jack s on this Home 
Theater System. 
   
  
 
 
 
 
1 Press  DISC 
.
 
 
 
 
2 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
3 Press   
.
 
 
 
 
4 Select  [EasyLink Setup] 
, then press   
   
 
 
  • [One Touch Play] 
 and  [One Touch 
Standby] 
 functions are turned on by 
default in the factor y. 
   
 
 
 
 
5 Select  [System Audio Control] 
 >  [On] 
, 
then press  OK 
 to star t scanning devices.
   
 
 
Once complete, audio input mapping    »
menu is displayed.
OSD Language
Sleep Timer Screen Saver Disc Lock
Display Dim
General Setup
DivX(R) VOD CodeEasyLink
One Touch Standby
System Audio Control
Audio Input Mapping
One Touch Play
EasyLink Setup
English
EN
Get started
1_hts3270-3377-3377W_12_en3.indd   232009-03-30   11:44:06 AM
 
						

							24
Select a play source
   
 
On the main unit 
 
 
  
 
 
 
 
Press the   • SOURCE 
 button repeatedly to 
select:  DISC 
 >  USB >   
 
 
FM 
 >  SCART IN 
 
  
>   
AUX 
 
 >   
COA X IN 
 >  OPTI IN 
 >  
MP3 LINK 
 >  DISC 
 ...
 
 
 
 
  
 
 
 
On the remote control 
 
 
  
 
 
 
 
Press   • AUDIO SOURCE 
 repeatedly to 
switch to the connected audio source:
   
Display   
Device connected to
 
 
AUX 
AUDIO IN-AUX sockets
   
SCART IN 
SCART TO T V socket
   
COA X IN 
COA XIAL DIGITAL IN 
socket
   
OPTI IN 
OPTICAL DIGITAL IN 
socket
   
MP3 LINK 
MP3 LINK socket
   
 
 
Press   • RADIO 
 to switch to FM band.
   
 
 
Press   • USB 
 to switch to USB mode.
   
 
 
Press   • DISC 
 to switch to disc mode.
EN
1_hts3270-3377-3377W_12_en3.indd   242009-03-30   11:44:09 AM
 
						

							25
Play video
  Note
 
For video disc, playback always resumes from the   •
point where it was last stopped. To star t play from 
the beginning, press  
   while the message is displayed.
 
 
 
 
Control video play
 
 
 
 
1  Play a title.
 
 
 
 
2  Use the remote control to control the 
title. 
  Button  Action
 
  
Star ts, pauses or resumes disc 
play.
   
 
Stops disc play.
   
 
Skips to the nex t title or chapter.
   
 
Skips to the beginning of the 
current title or chapter. Press 
twice to jump to the previous 
title or chapter.
   
 
 /   
Searches fast-for ward (right) 
or fast-back ward (lef t). Press 
repeatedly to change the search 
speed.
   
In pause mode, slow motion 
back ward or for ward play.
   
 
 /   
Searches slow-for ward (down) 
or slow-back ward (up). Press 
repeatedly to change the search 
speed.
   
For VCD, only slow-for ward play 
is possible.
   
 
 
 
 
 
 
 
 
 
 
 
5 Play
 
 
 
 
Play a disc
 
Caution
 
Never place any objec ts other than discs into the disc   •
compar tment.
   
Never touch the disc optical lens inside the disc 
  •
compar tment.
 
 
 
 
1 Press   
 to open the disc compar tment.
 
 
 
 
2  Inser t a disc with its label facing up.
   
 
 
For double-sided disc, load the side  • 
to play faces up.
   
 
 
 
 
3 Press   
 to close the disc compar tment 
and star t disc play.
   
 
 
To view disc play, turn on the T V to  • 
the correct viewing channel for this 
Home Theater System.
   
 
 
To stop disc play, press   • 
 
.
 
Note
 
Check the types of discs suppor ted. (see   •
‘ Speci cations’ > ‘Playback media’).
   
If the password entr y menu is displayed, enter 
  •
the password before you can play the locked or 
restricted disc.
   
If you pause or stop a disc for about 5 minutes, the 
  •
screen saver ac tivates. To deac tivate the screen 
saver, press  DISC 
.
   
Af ter you pause or stop a disc and no but tons are 
  •
pressed within 15 minutes, this Home Theater 
System automatically switches to standby mode. 
   
 
 
 
 
English
EN
Play
1_hts3270-3377-3377W_12_en3.indd   252009-03-30   11:44:14 AM
 
						

							26
Access DVD menu
   
  
 
 
 
 
1 Press  DISC 
 to access disc main menu.
 
 
 
 
2  Select a play option, then press  OK 
.
   
 
 
In some menus, press the   • Numeric 
buttons 
 to input your selection.
   
 
 
To return to the title menu during  • 
play, press  
   
 BACK 
.
Change video play
 
 
 
 
1  Play a title.
 
 
 
 
2  Use the remote control to change the 
video play. 
  Button  Action
 
 
AUDIO 
SYNC  Selects an audio language or 
channel on a disc.
   
SUBTITLE 
Selects the subtitle language on 
a disc.
   
REPEAT 
Selects or turns off repeat or 
shuf e mode. 
   
Repeat options var y depending 
on the disc type. 
   
For VCDs, repeat play is only 
possible if the PBC mode is 
turned off.
   
ZOOM 
Zooms in or out of the picture.
   
To pan through the zoomed 
image, press the  Navigation 
buttons 
.
   
 
 
 INFO 
Displays the current status or 
disc information.
   
You can change the video 
play options here without 
interrupting disc play.
   
 
 
 
SCREEN 
FIT  Fits the picture format to the 
TV screen.
   
You can watch the movie in full 
screen on T V.
  Note
 
Some oper ations may not wor k with some discs. See   •
the infor mation accompanying the disc for details.
 
 
 
 
 
EN
1_hts3270-3377-3377W_12_en3.indd   262009-03-30   11:44:20 AM
 
						

							27
   
 
 
 
Sync audio output with video play
 
 
If the video play is slower than the audio 
output (sound does not match with the 
pictures), you can delay the audio output to 
match the video.
   
  
 
 
 
 
1  Press and hold  AUDIO SYNC 
 until 
‘AUDIO SYNC’ is displayed.
   
 
 
2  Within  ve seconds, press  VOL +/- 
 to set 
the delay time for audio output.
  Note
 
If the volume control is not used within  ve seconds,   •
it resumes nor mal volume control func tion. 
 
 
 
 
 
Quick skip play to a speci c time
 
 
  
 
 
 
 
1  During play, press   
 
 INFO 
.
   
 
 
The disc status menu is displayed.   »
 
 
 
 
 
 
2 Press   
  
 to view information, then press 
  OK 
.
   
 
 
  • [TT Time] 
 (title time) 
   
 
 
  • [Ch Time] 
 (chapter time) 
   
 
 
  • [Disc Time] 
 (disc time) 
   
 
 
  • [Track Time] 
 (track time) 
 
 
 
 
 
 
3  Press the  Numeric buttons 
 to enter the 
time where you want to skip to, then 
press  OK 
.
 
Note
 
The options are dif ferent depending on the disc type.  •
 
 
 
 
 
 
 
 
 
Access VCD menu or preview menu
 
 
The PBC (Playback Control) for VCD is 
activated by default in the factor y. When you 
load in a VCD, the contents menu is displayed. 
   
 
 
1 Press   
  
 to select a play option, then 
press  OK 
 to star t play.
   
 
 
If PBC is off, it skips the menu and  • 
star ts play from the  rst title.
   
 
 
To return to the menu during play,  • 
press  
   
 BACK 
 (only possible if the 
PBC mode is on).
   
 
 
 
 
2 Press  DISC 
 to preview the contents of 
the disc.
   
 
 
To exit the menu, press   • DISC 
.
 
 
  
 
 
 
 
 
 
3  Select a preview play option, then press 
  OK 
 
 
 
 
  
 
 
 
[Track Digest] 
   
Plays the  rst few seconds of each track in a 
disc.
   
  
 
 
 
[Disc Interval] 
   
Divides the total disc time by six and play the 
 rst few seconds of these inter vals.
   
  
 
 
 
[Track Interval] 
   
Divides the current track by six and play the 
 rst few seconds of these inter vals. 
   
This option is not available in stop mode.
 
Tip
 
You can change the PBC set ting (see ‘Adjust set tings’   •
> ‘Preferences’ >  [PBC] 
).
Select Digest Type:
Track Digest
Disc Interval
Track Interval 
English
EN
Play
1_hts3270-3377-3377W_12_en3.indd   272009-03-30   11:44:22 AM
 
						

							28
Play DivX® video
   
DivX video is a digital media format that 
retains high quality despite a high rate of 
compression. You can enjoy DivX video on 
this DivX® Cer ti ed Home Theater System.
   
 
 
1  Inser t a disc or USB that contains the 
DivX videos.
   
 
 
2 Press  DISC 
 or  USB 
.
   
 
 
A contents menu is displayed.   »
 
 
 
 
 
 
3  Select a title to play, then press   
.
 
 
 
 
4  Use the remote control to control the 
title. 
   
Button   
Action
 
 
AUDIO 
SYNC  Selects an audio language or 
channel.
   
SUBTITLE 
Select DVD or DivX subtitle 
languages.
   
 
Stops play.
   
For DivX Ultra video, press 
this button again to display the 
contents menu.
   
 
 
 INFO 
Displays DivX Ultra video 
information.
  Note
 
You can only play DivX videos that were rented   •
or purchased with the DivX registr ation code of 
this Home Theater System (see ‘Adjust set tings’ > 
‘Gener al setup’ >  [DivX(R) VOD Code] 
) .
   
You can play DivX video  les of up to 4GB .
  •
 
 
If the subtitle does not appear correc tly, change the   •
char ac ter set (see ‘Adjust set tings’ > ‘Preferences’ > 
  [DivX Subtitle] 
).
   
This Home Theater System can display up to 45 
  •
char ac ter s in the subtitle.
 
 
 
 
 
 
 
 
 
 
 
Repeat play a speci c section
 
 
 
 
1  During play, press  REPEAT A-B 
 where 
you want to set as the star ting point.
   
 
 
2 Press  REPEAT A-B 
 again to set the 
ending point.
   
 
 
Repeat play star ts.   »
 
 
 
 
 
 
3  To cancel repeat play, press  REPEAT A-B 
 
again.
  Note
 
The mar ked sec tion for repeat play is only possible   •
within a track /title.
 
 
 
 
 
View video play from different camera 
angles
   
 
 
1  During play, press   
 
 INFO 
.
   
 
 
The disc status menu is displayed.   »
 
 
 
 
 
 
2 Select  [Angle] 
, then press   
.
 
 
 
 
3  Press the  Numeric buttons 
 to select an 
angle, then press  OK 
.
   
 
 
Play changes to the selected angle.   »
 
Note
 
Applicable only to discs contain multi-angle scenes.  •
 
 
 
 
 
EN
1_hts3270-3377-3377W_12_en3.indd   282009-03-30   11:44:26 AM
 
						

							29
   
 
 
 
Play MP3/WMA music
 
 
MP3/ WMA is a type of highly compressed 
audio  le ( les with .mp3 or .wma extensions).
   
 
 
1  Inser t a disc or USB that contains the 
MP3/WMA music.
   
 
 
2 Press  DISC 
 or  USB 
.
   
 
 
A contents menu is displayed.   »
 
 
 
 
 
 
3  Select a folder, then press  OK 
.
 
 
 
 
4  Select a track to play, then press   
.
   
 
 
To return to the main menu, press   • 
 
 
 BACK 
 or press   
 until ‘Previous’ 
folder is selected, then press  OK 
.
 
Note
 
For disc recorded in multiple sessions, only the  r s t   •
session is played.
   
This Home Theater System does not suppor t 
  •
MP3PRO audio for mat.
   
If any special char ac ter s are present in the MP3 tr ack 
  •
name (ID3) or album name, it might not be displayed 
correc tly on the screen because these char ac ter s are 
not suppor ted. 
   
Some WMA  les are protec ted by Digital Rights 
  •
Management and cannot be played on this Home 
Theater System.
   
Folders/ les that exceed the suppor ted limit of 
  •
this Home Theater System will not be displayed or 
played.
  Tip
 
You can selec t the display of data contents, view   •
folder s or  les (see ‘Adjust set tings’ > ‘Preferences’ > 
  [MP3/JPEG Display] 
).
 
 
 
 
 
 
Play music
 
 
 
 
Control audio track play
 
 
 
 
1  Play a track.
 
 
 
 
2  Use the remote control to control the 
track. 
  Button   Action
 
  
Star ts, pauses or resumes 
disc play.
   
 
Stops disc play.
   
 
Skips to the nex t track.
   
 
Skips to the beginning of 
the current track. Press 
twice to jump to the 
previous track.
   
 
Selects an item to play.
   
 
 /   
Searches fast-forward 
(right) or fast-back ward 
(lef t). Press repeatedly to 
change the search speed.
   
REPEAT 
Selects or turns off repeat 
or shuf e mode.
English
EN
Play
1_hts3270-3377-3377W_12_en3.indd   292009-03-30   11:44:27 AM
 
						

							30
  Note
 
You may require longer time to display the disc   •
content on the T V due to the large number of songs/
photos compiled onto one disc.
   
If the JPEG photo is not recorded with an ‘exif ’ type 
  •
 le, the ac tual thumbnail pic ture is not be shown 
on the display. It is replaced by a ‘blue mountain’ 
thumbnail picture.
   
This Home Theater System can only display digital 
  •
camer a pic tures according to the JPEG -E XIF for mat, 
typically used by almost all digital camer as. It cannot 
display Motion JPEG and pic tures in for mats other 
than JPEG , or sound clips associated with pic tures.
   
Folders/ les that exceed the suppor ted limit of this 
  •
Home Theater System are not displayed or played.
Play photo
 
 
 
 
Play photo as slideshow
 
 
This Home Theater System can play JPEG 
photos ( les with .jpeg or .jpg ex tensions).
   
 
 
1  Inser t a disc or USB that contains the 
JPEG photos.
   
 
 
2 Press  DISC 
 or  USB 
.
   
 
 
Slideshow begins (for Kodak disc) or    »
a contents menu (for JPEG disc) is 
displayed.
   
 
 
 
 
3  Select the folder/album you want to play.
   
 
 
To preview the photos in the folder/ • 
album, press  
   
 INFO 
.
 
 
  
 
 
 
 
To go to previous or nex t screen  • 
display, press  
   /   
.
   
 
 
To select a photo, press the  • 
  Navigation buttons 
.
   
 
 
To display the selected photo only,  • 
press  OK 
.
 
 
 
 
 
 
4 Press   
 to star t slideshow play.
   
 
 
To return to the menu, press  • 
 
   
 BACK 
.
EN
1_hts3270-3377-3377W_12_en3.indd   302009-03-30   11:44:33 AM