Philips Hd9 Owners Manual

							HD9 1.1.x DICOM Conformance Statement 989605375630044 Rev. B Page 31   
   
Table 4.2-29
 provides a description of the  MPPS N-CREATE and N-SET request identifiers send by HD9. Empty cells 
in the N-CREATE and N-SET columns indicate that the attribute is not sent. 
Table 4.2-29 
MPPS N-CREATE / N-SET REQUEST IDENTIFIER 
Attribute Name  Tag VR  N-CREATE  N-SET 
Specific Character Set  0008,0005 CS Only when a replacement 
character set is used. 
 
 
Performed Procedure Step Relationship 
Scheduled Step Attribute 
Sequence  0040,0270 SQ 
     
> Study Instance UID  0020,000D UI From MWL or generated 
by device 
 
 
> Referenced Study Sequence  0008,1110 SQ From MWL    
>> Referenced SOP Class UID  0008,1150 UI From MWL    
>> Referenced SOP Instance 
UID  0008,1155 UI 
From MWL    
> Accession Number  0008,0050 SH From MWL or user input    
> Requested Procedure ID  0040,1001 SH From MWL    
> Requested Procedure 
Description  0032,1060 LO 
From MWL    
> Scheduled Procedure Step ID  0040,0009 SH From MWL    
> Scheduled Procedure Step 
Description  0040,0007 LO 
From MWL    
> Scheduled Protocol Code 
Sequence  0040,0008 SQ 
From MWL    
>> Code Value  0008,0100 SH From MWL    
>> Coding Scheme Designator  0008,0102 SH From MWL    
>> Coding Scheme Version  0008,0103 SH From MWL    
>> Code Meaning  0008,0104 LO From MWL    
Patients Name  0010,0010 PN From MWL or user input    
Patient ID  0010,0020 LO From MWL or user input    
Patients Birth Date  0010,0030 DA From MWL or user input    
Patients Sex  0010,0040 CS From MWL or user input    
Referenced Patient Sequence  0008,1120 SQ Zero length    
Performed Procedure Step Information 
Performed Procedure Step ID  0040,0253 SH Generated by device 
(Study Date + Study 
Time) 
 
 
Performed Station AE Title  0040,0241 AE From Modality Setup     
						

							HD9 1.1.x DICOM Conformance Statement 989605375630044 Rev. B Page 32   
   
Performed Station Name 
0040,0242 SH Zero length    
Performed Location  0040,0243 SH Zero length    
Performed Procedure Step Start 
Date  0040,0244 
DA Actual Start Date    
Performed Procedure Step Start 
Time  0040,0245 
TM Actual Start Time    
Performed Procedure Step 
Status  0040,0252 CS 
IN PROGRESS  COMPLETED or 
“DISCONTINUED” 
Performed Procedure Step 
Description 
0040,0254 LO From MWL or user input 
(Same as Study 
Description)  From MWL or user input 
(Same as Study 
Description) 
Performed Procedure Type 
Description  
0040,0255 LO 
Zero length   
Procedure Code Sequence  0008,1032 SQ From MWL  From MWL 
> Code Value  0008,0100 SH From MWL  From MWL 
> Coding Scheme Designator  0008,0102 SH From MWL  From MWL 
> Coding Scheme Version  0008,0103 SH From MWL  From MWL 
> Code Meaning  0008,0104 LO From MWL  From MWL 
Performed Procedure Step End 
Date  0040,0250 
DA Zero length  Actual End Date 
Performed Procedure Step End 
Time  0040,0251 
TM Zero length  Actual End Time 
Performed Procedure Step 
Discontinuation Reason Code 
Sequence  0040,0281 SQ 
Zero length  Present only if 
Discontinued, else Zero 
length 
> Code Value 
0008,0100 SH   110500 
> Coding Scheme Designator  0008,0102 SH   DCM 
> Coding Scheme Version  0008,0103 SH    
> Code Meaning  0008,0104 LO   “Doctor cancelled 
procedure” 
Image Acquisition Results 
Modality 0008,0060 
CS US    
Study ID  0020,0010 SH generated by device 
(Study Date + Study 
Time) 
 
 
Performed Protocol Code 
Sequence  0040,0260 SQ 
Zero length    
Performed Series Sequence  0040,0340 SQ Zero length  One or more items 
> Performed Physicians Name  0008,1050 PN   Zero  length 
> Protocol Name  0018,1030 LO    FreeForm or staged 
protocol name (In case 
of Stress echo)  
						

							HD9 1.1.x DICOM Conformance Statement 989605375630044 Rev. B Page 33   
   
> Operators Name 
0008,1070 PN    From user input 
> Series Instance UID  0020,000E UI   generated  by device 
> Series Description  0008,103E LO   Zero  length 
> Retrieve AE Title  0008,0054 AE   Zero  length 
> Referenced Image Sequence  0008,1140 SQ   From  Modality 
>> Referenced SOP Class UID  0008,1150 UI   From  Modality 
>> Referenced SOP Instance 
UID  0008,1155 UI 
  From  Modality 
> Referenced Non-Image 
Composite SOP Instance 
Sequence  0040,0220 SQ 
   From Modality, when an 
SR is present in the 
study. 
>> Referenced SOP Class UID 
0008,1150 UI   From  Modality 
>> Referenced SOP Instance 
UID  0008,1155 UI 
  From  Modality 
 
4.2.2.4 Association Acceptance Policy 
The Workflow Application Entity  does not accept Associations. 
4.2.3 Hardcopy Application Entity Specification 
4.2.3.1  SOP Classes 
HD9 provides Standard Conformance  to the following SOP Classes: 
Table 4.2-30 
SOP CLASSES FOR AE HARDCOPY 
SOP Classes  SOP Class UID SCU SCP 
Basic Grayscale Print Management Me ta 1.2.840.10008.5.1.1.9  Yes No 
Basic Color Print Management Meta  1.2.840.10008.5.1.1.18 Yes No 
 
4.2.3.2  Association Policies 
4.2.3.2.1  General 
The DICOM standard application context name for DICOM 3.0 is always proposed: 
Table 4.2-31 
DICOM APPLICATION CONTEXT FOR AE HARDCOPY 
Application Context Name  1.2.840.10008.3.1.1.1 
4.2.3.2.2  Number of Association 
HD9 can initiate one or more Associations at a time for eac h destination to which a transfer request is being processed 
in the active job queue list.   
Table 4.2-32  
						

							HD9 1.1.x DICOM Conformance Statement 989605375630044 Rev. B Page 34   
   
NUMBER OF ASSOCIATIONS INITIATED FOR AE HARDCOPY 
Maximum number of simultaneous Associations 
Unlimited (number of configured 
hardcopy devices) 
4.2.3.2.3 
Asynchronous Nature 
HD9 does not support asynchronous communications (multipl e outstanding transactions over a single Association). 
Table 4.2-33 
ASYNCHRONOUS NATURE AS A SCU FOR AE HARDCOPY 
Maximum number of outstanding asynchronous transactions  1 
 
4.2.3.2.4 Implementation Identifying Information 
The implementation information for this Application Entity is: 
Table 4.2-34 
DICOM IMPLEMENTATION CLASS AND VERSION FOR AE HARDCOPY 
Implementation Class UID  1.3.46.670589.14.2 
Implementation Version Name  HD9 1.1 
 
4.2.3.3 Association Initiation Policy 
4.2.3.3.1  Activity – Film Images 
4.2.3.3.1.1  Description and Sequencing of Activities 
A user composes images onto film sheets and requests them  to be sent to a specific hardcopy device. The user can 
select the desired film format and number of copies. Ea ch print job is forwarded to the job queue and processed 
individually.  
						

							Hardcopy AEPrinter
1. Open Association
2. N-CREATE (Film Session)
3. N-CREATE (Film Box)
4. N-SET (Image Box(es))
5. N-ACTION (Film Box)
7. N-DELETE (Film Session)
8. Close Association
6. Print film sheets
 
Figure 4.2-5 
SEQUENCING OF ACTIVITY - FILM IMAGES 
A typical sequence of DIMSE messages se nt over an association between Hardcopy AE and a Printer is illustrated in 
the Figure above. 
Association Initiation Policies for “Batch”, “Send As You Go” and “Manual” Mode are equal to the Sending images of the 
Storage Application Entity. (See  4.2.1.3.1.1). 
Status of the print job is reported through the job control in terface. One or more job can be active at a time for each 
separate hardcopy device. If any response from the remo te Application contains a status other than Success or 
Warning, the Association is aborted and the related job is switched to a failed state. It can be restarted any time by user 
interaction or, if configured, by automated retry. 
4.2.3.3.1.2  Proposed Presentation Contexts 
HD9 is capable of proposing the Presentation Contexts shown in the Table below: 
Table 4.2-35 
PROPOSED PRESENTATION CONTEXTS FOR ACTIVITY FILM IMAGES 
HD9 1.1.x DICOM Conformance Statement 989605375630044 Rev. B Page 35   
    
						

							HD9 1.1.x DICOM Conformance Statement 989605375630044 Rev. B Page 36   
   
Presentation Context Table 
Abstract Syntax 
Transfer Syntax Role Ext. 
Neg. 
Name  UID Name List  UID List 
Basic Grayscale Print 
Management Meta 1.2.840.10008.
5.1.1.9 Explicit VR Little Endian 
Implicit VR Little Endian 
Explicit VR Big Endian    1.2.840.10008.1.2.1 
1.2.840.10008.1.2 
1.2.840.10008.1.2.2 
SCU None 
Basic Color Print 
Management Meta 
1.2.840.10008.
5.1.1.18 Explicit VR Little Endian 
Implicit VR Little Endian 
Explicit VR Big Endian    1.2.840.10008.1.2.1 
1.2.840.10008.1.2 
1.2.840.10008.1.2.2 
SCU None 
 
4.2.3.3.1.3 
Common SOP Specific Conformance for all Print SOP Classes 
The general behavior of Hardcopy AE during communication fa ilure is summarized in the table below. This behavior is 
common for all SOP Classes supported by Hardcopy AE. 
Table 4.2-36 
HARDCOPY COMMUNICATION FAILURE BEHAVIOR 
Exception Behavior 
Timeout  The Association is aborted using A-ABORT and 
the print job is marked as failed. 
Association aborted by the SCP or network la
yers The print job is marked as failed.   
 
4.2.3.3.1.4 SOP Specific Conformance for the Film Session SOP Class 
Hardcopy AE supports the following DIMSE  operations for the Film Session SOP Class: 
- N-CREATE 
- N-DELETE 
Details of the supported attributes and status handling behavior are described in the following subsections. 
 
4.2.3.3.1.4.1  Film Session SOP Class Operations (N-CREATE) 
The attributes supplied in an N-CREATE Request are listed in the table below: 
Table 4.2-37 
FILM SESSION SOP CLASS N-CREATE REQUEST ATTRIBUTES 
Attribute Name  Tag VR Value  Presence 
of Value  Source 
Number of Copies 
2000,0010 IS  1 - 99  ALWAYS USER 
Print Priority  2000,0020 CS HIGH, MED or LOW  ALWAYS USER 
Medium Type  2000,0030 CS PAPER, CLEAR FILM, BLUE 
FILM, MAMMO CLEAR FILM or 
MAMMO BLUE FILM 
ALWAYS USER 
Film Destination 
2000,0040 CS MAGAZINE or PROC ESSOR ALWAYS  USER  
						

							HD9 1.1.x DICOM Conformance Statement 989605375630044 Rev. B Page 37   
   
The behavior of Hardcopy AE when encount
ering status codes in an N-CREATE response is summarized in the table 
below: 
Table 4.2-38 
FILM SESSION SOP CLASS N-CREATE RESPONSE STATUS HANDLING BEHAVIOR 
Service Status  Further Meaning  Error Code  Behavior 
Success Success  0000 The SCP has Completed the operation successfully. 
Warning  Attribute Value 
Out of Range 
0116H 
System continues operations. 
Warning  Attribute List 
Error 
0107H 
Same as above 
* *  Any other 
status code. The Association is aborted using A-Abort and the print 
job is marked as failed 
 
4.2.3.3.1.4.2 
Film Session SOP Class Operations (N-DELETE) 
The behavior of Hardcopy AE when encount ering status codes in an N-DELETE response is summarized in the table 
below: 
Table 4.2-39 
PRINTER SOP CLASS N-DELETE RESPONSE STATUS HANDLING BEHAVIOR 
Service Status  Further Meaning  Error Code  Behavior 
Success Success  0000 The SCP has Completed the operation successfully. 
* *  Any other 
status code. The Association is aborted using A-Abort and the print 
job is marked as failed. 
 
4.2.3.3.1.5 
SOP Specific Conformance for the Film Box SOP Class 
Hardcopy AE supports the following DIMSE operations for the Film Box SOP Class: 
- N-CREATE 
- N-ACTION 
Details of the supported attributes and status handling behavior are described in the following subsections. 
4.2.3.3.1.5.1  Film Box SOP Class Operations (N-CREATE) 
The attributes supplied in an N-CREATE Request are listed in the table below: 
Table 4.2-40 
FILM BOX SOP CLASS N-CREATE REQUEST ATTRIBUTES  
						

							HD9 1.1.x DICOM Conformance Statement 989605375630044 Rev. B Page 38   
   
Attribute Name 
Tag VR Value  Presence 
of Value  Source 
Image Display Format 
2010,0010 ST STANDARD\1, 1 , 
STANDARD\1, 2 , 
STANDARD\2, 2 , 
STANDARD\2, 3 , 
STANDARD\3, 3 , 
STANDARD\3, 4 , 
STANDARD\3, 5 , 
STANDARD\4, 4 , 
STANDARD\4, 5 or 
STANDARD\4, 6   
ALWAYS USER 
Referenced Film Session 
Sequence 
2010,0500 SQ
  ALWAYS  AUTO 
> Referenced SOP Class UID 0008,1150 UI 1.2.840.10008.5.1. 1.1 ALWAYS  AUTO 
> Referenced SOP Instance 
UID  0008,1155 UI From created Film Session SOP 
Instance 
ALWAYS AUTO 
Film Orientation 
2010,0040 CS PORTRAIT or LANDSCAPE  ALWAYS USER 
Film Size ID  2010,0050 CS 8INX10IN, 8_5INX11IN, 
10INX12IN, 10INX14IN, 
11INX14IN, 11INX17IN, 
14INX14IN, 14INX17IN, 
24CMX24CM, 24CMX30CM, 
A4, A3 
ALWAYS USER 
Magnification Type 
2010,0060 CS REPLICATE, BILINEAR, 
CUBIC, NONE 
ALWAYS USER 
Max Density 
2010,0130 US 0 ~  ANAP USER 
Configuration Information  2010,0150 ST Values are defined in Printer’s 
Conformance Statement 
ANAP USER 
Smoothing Type 
2010,0080 CS Values are defined in Printer’s 
Conformance Statement 
ANAP USER 
Border Density 
2010,0100 CS BLACK or WHIT E ALWAYS  USER 
Empty Image Density  2010,0110 CS BLACK or WHIT E ALWAYS  USER 
Min Density  2010,0120 US 0 ~  ANAP USER 
The behavior of Hardcopy AE when encountering status codes in N-CREATE responses is summarized in the table 
below: 
 
 
 
 
Table 4.2-41 
FILM BOX SOP CLASS N-CREATE RESPONSE STATUS HANDLING BEHAVIOR 
Service Status  Further Meaning  Error Code  Behavior 
Success Success  0000 The SCP has Completed the operation successfully. 
Warning  Attribute Value 
Out of Range 
0116H 
System continues operations.  
						

							HD9 1.1.x DICOM Conformance Statement 989605375630044 Rev. B Page 39   
   
Warning 
Attribute List Error  0107H Same as above 
Warning  Requested Min 
Density or Max 
Density outside of 
printers operating 
range 
B605H 
Same as above 
* *  Any other 
status code. The Association is aborted using A-Abort and the 
print job is marked as failed. 
 
4.2.3.3.1.5.2 
Film Box SOP Class Operations (N-ACTION) 
An N-ACTION Request is issued to instruct the Print SCP to print the contents of the Film Box. 
The behavior of Hardcopy AE when encountering status codes in N-ACTION responses is summarized in the table 
below: 
Table 4.2-42 
FILM BOX CLASS N-ACTION RESPONSE STATUS HANDLING BEHAVIOR 
Service Status  Further Meaning  Error Code  Behavior 
Success Success  0000 The SCP has Completed the operation successfully. 
* *  Any other 
status code. The Association is aborted using A-Abort and the 
print job is marked as failed. 
 
4.2.3.3.1.6 
SOP Specific Conformance for the Film Box SOP Class 
Hardcopy AE supports the following DIMSE operations for the Image Box SOP Class: 
- N-SET 
Details of the supported attributes and status handling behavior are described in the following subsections. 
 
4.2.3.3.1.6.1  Image Box SOP Class Operations (N-SET) 
The attributes supplied in an N-SET Request are listed in the table below: 
Table 4.2-43 
BASIC GRAYSCALE IMAGE BOX SOP CL ASS N-SET REQUEST ATTRIBUTES 
Attribute Name Tag VR Value  Presence 
of Value  Source 
Image Position 
2020,0010 US 1 - n  ALWAYS AUTO 
Basic Grayscale Image 
Sequence  2020,0110 SQ
  ALWAYS  AUTO 
> Samples Per Pixel 0028,0002 US  1  ALWAYS AUTO 
> Photometric Interpretation  0028,0004 CS  MONOCHROME2  ALWAYS AUTO 
> Rows  0028,0010 US Number of Row Pixels  of Image ALWAYS  AUTO 
> Columns  0028,0011 US 
Number of Column Pixels of  ALWAYS AUTO  
						

							HD9 1.1.x DICOM Conformance Statement 989605375630044 Rev. B Page 40   
   
Image 
> Bits Allocated 
0028,0100 US 8  ALWAYS AUTO 
> Bits Stored  0028,0101 US 8  ALWAYS AUTO 
> High Bit  0028,0102 US 7  ALWAYS AUTO 
> Pixel Representation  0028,0103 US 0  ALWAYS AUTO 
> Pixel Data  7FE0,0010 OBPixels of Image  ALWAYS AUTO 
 
Table 4.2-44 
BASIC COLOR IMAGE BOX SOP CLASS N-SET REQUEST ATTRIBUTES 
Attribute Name  Tag VR Value  Presence 
of Value  Source 
Image Position 
2020,0010 US 1 - n  ALWAYS AUTO 
> Samples Per Pixel  0028,0002 US  3  ALWAYS AUTO 
> Photometric Interpretation  0028,0004 CS RGB  ALWAYS AUTO 
> Planar Configuration  0028,0006 US  1  ALWAYS AUTO 
> Rows  0028,0010 US Number of Row Pixels  of Image ALWAYS  AUTO 
> Columns  0028,0011 US Number of Column Pixels of 
Image 
ALWAYS AUTO 
> Bits Allocated 
0028,0100 US 8  ALWAYS AUTO 
> Bits Stored  0028,0101 US 8  ALWAYS AUTO 
> High Bit  0028,0102 US 7  ALWAYS AUTO 
> Pixel Representation  0028,0103 US 0  ALWAYS AUTO 
> Pixel Data  7FE0,0010 OBPixels of Image  ALWAYS AUTO 
The behavior of Hardcopy AE when encountering status c odes in an N-SET response is summarized in the table 
below: 
Table 4.2-45 
IMAGE BOX SOP CLASS N-SET RESPONSE STATUS HANDLING BEHAVIOR 
Service Status  Further Meaning  Error Code  Behavior 
Success Success  0000 The SCP has Completed the operation successfully. 
* *  Any other 
status code. The Association is aborted using A-Abort and the 
print job is marked as failed. 
 
4.2.3.4 
Association Acceptance Policy 
The Hardcopy Application Entity  does not accept Associations. 
 
4.3  NETWORK INTERFACE 
4.3.1  Physical Network Interface 
HD9 supports a single network interface. One of the followi ng physical network interfaces will be available depending