Philips Bds4241r User Manual

							31
User Manual BDS4241R
6.10 CHANGING THE SCREEN SIZE
You can select the screen size which best corresponds to your viewing
requirements.
1Press the MENUbutton on the front panel or remote control.
2Press the VOL+or VO L
-button to select Screen.
3Press the CH
-button to enter the selected menu group.
=> The Sizeis selected.
4Press the VOL+or VO L
-button to select required screen size.
AUTO - FILL ALL - FILL ASPECT - ZOOM - 
ANAMORPHIC - *WIDE
( *WIDE is only available when the split screen mode is
not selected.)
Note:
You can simply select required screen size by repeatedly pressing the
I.SIZE(Image SIZE) button on the remote control.
6.11 SETTING UP THE PC INPUT
Preset to the RGBmode by pressing the INPUTbutton.
1Press the MENUbutton on the front panel or remote control.
2Press the VOL+or VO L
-button to select Screen.
3Press the CH
-button to enter the selected menu group.
Adjusting the PC screen automatically
1Press the CH
-or CH +button to select Auto.
2Press the VOL+or VO L
-button.
=> The screen quality and position are automatically adjusted.
Note:
You can adjust the PC screen automatically by simply pressing the
AUTObutton on the remote control.
Selecting the position of the PC screen if it does not fit the
PDP screen
1Press the CH
-or CH +button to selectH Positionor 
V Positing.
2Press the VOL+or VO L
-button to fit the TV screen until you
reach the optimal setting.
Image Screen Setup  Audio
Move [- CH +]     Select [- VOL +]     Exit [MENU] Size AUTO
Freeze OFF ON
Sticking Minimum OFF  ON
Image Screen Setup  Audio
Size AUTO
Select [- VOL +]     Exit [MENU]
Image Screen Setup  Audio
Move [- CH +]     Select [- VOL +]     Exit [MENU]
Size AUTO
H Position 035 
V Position 044
Auto
Freeze OFF ON
Sticking Minimum OFF  ON
Image Screen Setup  Audio
Adjust [- VOL +]     Exit [MENU]H Position035
 
						

							32
User Manual BDS4241R
6.12 TELETEXT
The Teletext service is available in many countries under a variety of names
(TOP Text, Fastext, FLOF test, Videotext). It is provided as a free service by
some television broadcasters. This service provides a real wealth of 
information, available at any time, on weather, sporting results, news, games,
etc. The information is presented in pages organized in topics specified in
color on the screen and you can access this information by simply pressing
the buttons of the same color on the remote control.
This product doesnt have a tuner inside, but an external settop box may
still contain channels with teletext information.
Accessing Teletext
1Press the CH +orCH -button to select the required source.
2Press the TEXTbutton (Œ) on the remote control.
=> Teletext opens on the index page (100).
3Press the TEXTbutton again to exit.
Select a specific Teletext page
1Enter the three-digit Teletext page number using the numeric
buttons.
=> The current page is displayed. If the selected page is linked to
with several secondary pages these pages are displayed in
sequence.
2Press the FREEZEbutton (∏) to freeze the display on a given
page.
3To resume, press the FREEZEbutton again.
Display TELETEXT  index
1Press the INPUTbutton (´) to display the TELETEXT index.
Fastext
1Press the red, green, yellowand bluebuttons (ˇ) on the
remote control to easily access the topic and relevant pages you
want.
Page Down (AUTO)
1Press the AUTObutton (¨) to display the previous TELETEXT
page.
Zoom (I. SIZE)
1Press the I. SIZEbutton (ˆ) once to zoom in on the top part of
the screen.
2Press twice to zoom in on the bottom part of the screen and
three times to return to normal display.
 
						

							33
User Manual BDS4241R
Page Up (MTS)
1Press the MTSbutton (Ø) to display the next TELETEXT page.
FREEZE
1Press the FREEZEbutton (∏) on the remote control to freeze
the current page, preventing update and subpage display.
2Press the FREEZEbutton again to cancel.
Reveal
1Press the Reveal button (”) to hide page information. Press the
button again to unhide.
Sub-page
1Press the sub-page button (’) to display a secondary page by
entering its number.
Subtitles
Some channels provide subtitles for some of their program through
Teletext. The numbers of the relevant pages are specified on the
Teletext index page.
1Enter the number of the relevant page to display the subtitles.
=> The subtitles appear in the TV picture. The header disappears
after a couple of seconds.
2Press any button on the remote control (except TEXTor the
volume adjustment buttons) to display the subtitles again.
3Press the TEXTbutton (Œ) to return to TV mode.
Note:
In Teletext mode, volume controls remain available, but the relevant
symbols are not shown on the screen.
 
						

							34
User Manual BDS4241R
6.13 VIEWING THE PICTURE IN PICTURE (PIP)
You can display a sub-picture with the main picture. In this way you can
watch PDP the video input from any connected devices while watching
other video input.
Selecting a PIP mode
Press the SPLITbutton repeatedly to select required mode.
The available modes are displayed in the following order.
NORMAL - PIP - PBP
Selecting a location of the sub-picture
Press the LOCATEbutton.
Press the VO L
-,VOL+,CH-,or CH +button to select required loca-
tion. It is available in PIPmode only.
Selecting a size of the sub-picture
Press the SIZEbutton.
Press the VO L
-or VOL+button to select required size.
It is available in PIPmode only.
Split Screen NORMAL
PIP Locate
PIP Size
 
						

							35
User Manual BDS4241R
Swapping the main picture and the sub-picture
Press the SWAPbutton.
The main picture and the sub picture are interchanged.
It is available in PIPand PBPmode only.
Swapping the audio of the main or sub-picture
Press the A.SWAP(Audio SWAP) button repeatedly.
You can hear the audio of the main or sub-picture alternately.
It is available in PIPand PBPmode only.
Selecting the main picture or the sub-picture
Press the S.SELECTbutton repeatedly.
You can select the main or sub-picture alternately and adjust the status
of selected picture.
It is available in PIPand PBPmode only.
PIP Settings
“” Max. : 480p, 576p, 1024x768/60Hz
In the PIP mode, the sub input source is differently defined
for the default value (scart1 or scart2) depending on your PDP model.
6.14 REMOTE MANAGEMENT
This display can be managed remotely through the RS232 9-pin port,
by using a Serial Interface Communication Protocol (SICP).
The specifications of the SICP protocol can be found in a separate
document, called SICP User Manual.
TV
SCART 1 
SCART 2
VIDEO  
S-VIDEO    
COMPONENT   
RGB
DVI
Main InputSub Input
X
X
X
XX X
X
XX X
X
XX X
X
X XXXXSCART 1SCART 2VIDEO S-VIDEO
TV
SCART 1 
SCART 2
VIDEO  
S-VIDEO    
COMPONENT
RGB
DVI
Main InputSub Input
X
X
X
XSCART 1SCART 2VIDEO S-VIDEO
 
						

							36
User Manual BDS4241R
7. INPUT MODE
VGA Resolution
SDTV Resolution
HDTV Resolution
• The PC text quality is optimum in XGA mode (1024 x 768, 60Hz).
• When this PDP is used as a PC display, 24-bit color is supported (over 16 million colors).
• Your PC display screen might appear different depending on the manufacture (and your particular version of
Windows). Check your PC instruction book for information about connecting your PC to a display.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal). In some
cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC
is disconnected). If so, press the INPUT button to enter the video mode. Also, make sure that the PC is connected.
• When connecting a notebook PC to the PDP, make sure that the PC screen is displayed through only the PDP
(Otherwise, random signals might appear).
VGA
WVGA
SVGA
XGA
SXGA Standard
ResolutionActive Resolution
H Pixels     V Lines
640
848
800
1024
1280480
480
600
768
1024Refresh Rate
60
72
75
60
60
72
75
60
70
75
60
Pixel Rate
25.175 MHz
31.5 MHz
31.5 MHz
40 MHz
50 MHZ
49.5 MHz
65 MHz
75 MHz
78.5 MHz
108 MHzAspect ratio
16:9
16:9
16:9
16:9
16:9Stand for Mode
Video Graphic Array
Wide Video  Graphic Array
Super VGA
Super VGA  Extended
Graphic Array
Super XGA
720p
1080i
1080p Standard
Resolution
1280
1920720
1080
Not supported 30 Hz
50 Hz
25 Hz
30 Hz74.25 MHz
74.25 MHz16 : 9
16 : 9Normally DVB Mode
Normally ATSC  Mode
480i
480p
576i
576p Standard
Resolution
720
720480
57629.97 Hz
59.94 Hz
25 Hz
50 Hz13.5 MHz
27 MHz
13.5 MHz
27 MHz4 : 3
4 : 3Modified DVB Mode
Modified PAL Standard
Active Resolution
H Pixels    V LinesRefresh Rate Pixel Rate
Aspect ratioStand for Mode
Active Resolution
H Pixels     V LinesRefresh Rate
Pixel Rate
Aspect ratio
Stand for Mode
 
						

							37
User Manual BDS4241R
• When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable
connections.
• The display settings table complies to the IBM/VESA standards, and based on the analog input.
• The DVI support mode is regarded as same to the PC support mode.
• The best timing for the vertical frequency to each mode is 60Hz.
 
						

							38
User Manual BDS4241R
8. TECHNICALS SPECIFICATIONS
Display
Screen Size (Active Area)
Aspect ratio
Number of pixels
Pixel pitch
Displayable Colors
Brightness
Contrast Ratio
Color Temperature
Viewing AngleItem Specifications
852 (H) x 480 (V)
1. 080 (H) x 1. 080 (V) [mm] 42 (920.1(H) x 518.4(V) ±0.5mm)
16:9
1 billion (Option)
9500 K
Over 160 degrees
1500 cd/m2
10,000:1
 
						

							39
User Manual BDS4241R
In / Out Terminals
Speaker Output
RS-232C
DVI Input
RGB Input
Component Input
Monitor Output
S-Video Input
Video Input
Scart
Antenna InputItem Specifications
Internal speaker
External speaker (option)
D-Sub Jack x 1 (9 pin)
DVI Jack x 1 (24 pin)
RCA Jack x 1
D-Sub Jack x 1 (15 pin)
RCA Jack x 1
RCA Jack x 1
RCA Jack x 1
Mini DIN Jack x 1 (4 pin)
RCA Jack x 1
Scart Jack x 2 (21 pin) [Full x 1, Half x 1]
DIN - Type x 1
10W(L) + 10W(R) [RMS] /8Ω2Way 2Speaker
10W(L) + 10W(R) [RMS] /8Ω2Way 4Speaker
TXD + RXD(1:1)
Digital RGB : TMDS MAX : 720p,1080i,1280x1024/60Hz(SXGA)
Audio:0.5V[rms](Normal) / 2Channel(L+R)
Analog RGB:0.7V[p-p](75Ω), H/CS/V:TTL(2.2kΩ), SOG:1V[p-p](75Ω)
MAX:720p, 1080i, 1280x1024/60Hz(SXGA)
Audio:0.5V[rms](Normal) /2 Channel (L + R)
Y:1V[p-p](75Ω), Pb/Cb:0.7V[p-p](75Ω), Pr/Cr:0.7V[p-p](75Ω)
480i, 576i, 480p, 576p, 720p, 1080i
Audio: 0.5V[rms](Normal) / 2 Channel (L + R)
Video : 1V[p-p](75Ω)
Audio : 0.5V[rms](Normal) /2 Channel (L + R)
Y:1V[p-p] (75Ω), C:0.286V[p-p] (75Ω)[NTSC]
Y:1V[p-p] (75Ω), C:0.300V[p-p] (75Ω)[PAL/SECAM]
Video : 1V[p-p](75Ω)[NTSC / PAL / SECAM]
Audio : 0.5V[rms](Normal)/2 Channel(L + R)
Video : 1V[p-p] (75Ω)
Y : 1V[p-p] (75Ω), C : 0.3V[p-p](75Ω)
RGB : 0.7V[p-p] (75Ω)
Audio : 0.5V[rms](Normal)/2 Channel(L + R)
UHF/VHF (75Ω) [Unbalanced]
Channel : 48.25 MHz ~ 863.25 MHz
System : PAL 
-B/G, D/K, I and SECAM -B/G, D/K, L/L’
 
						

							40
User Manual BDS4241R
General
Environment Condition
External Speaker (Option)
Internal Speaker (Option)
Power Supply
Power Consumption
Dimension ( With Stand )
[W mm x H mm x D mm]
Weight ( Without Stand )Item Specifications
250 W
1028 x 625 x 89.8 (A)
29 kg AC 100 V ~ 240 V, 50/60 Hz
Dimension (W x H x D)
Weight
Type
Input
Impedance
Output Sound Pressure
Frequency ResponseSpecifications
113 mm x 626.6 mm x 82.2 mm
5 kg (L + R )
2 Way 4 Speaker System
10 W  (RMS)
8 Ohm
87 dB/W/M
45 Hz ~ 20 KH z
Type
Input
Impedance
Output Sound Pressure
Frequency ResponseSpecifications
2 Way 2 Speaker System
10 W  (RMS)
8 Ohm
88 dB/W/M
170 Hz ~ 20 KHz
Temperature
Humidity
PressureItem Specifications
Operational
Storage
Operational
Storage
Operational
Storage0 ~ 40
-20 ~ 60
20 ~ 80% RH (No condensation)
10 ~ 90% RH (No condensation)
800 ~ 1100 hPa (Al titude: 0 ~ 2,000 m)
700 ~ 1100 hPa (Al titude: 0 ~ 3,000 m)