Philips Bds4241r User Manual

							11
User Manual BDS4241R
3.2 REAR VIEW
1External speaker output
Connect to external speakers.
2RS-232 Connector
Connect to a PC to update software.
3Digital DVI input
Connect to digital video signals from a Set-Top box or Computer.
4RGB(VGA) input
Connect to RGB (VGA) output of Computer or Set-Top box.
5Component Video  inputs
Auto-detecting component video inputs (Y/Pb/Pr or Y/Cb/Cr) for
connecting to the component output jacks of a DVD player or
Set-Top Box.
6S-Video input
Connect S-Video signals from external sources such as VCRs or
DVD players.
7Monitor output
Connect to the video and audio input of a recording VCR or DVD 
Connect to the audio input of an audio system.
8. Video input
Connect to the video and audio output of an external device.
9SCART (AV) Connector
Connect to external sources such as VCRs or DVD players.
10 Power connection
Connect the supplied power cord to the wall outlet.
11 ANT
Connect to an antenna or a cable TV system.




 
						

							12
User Manual BDS4241R
3.3 REMOTE CONTROL
3.3.1 GENERAL FUNCTIONS
1Sound Mute On/Off
2Standby Power On/Off
Push this button to switch on the PDP from Standby mode.
Push it again to turn it off to Standby mode.
3Menu
Activates the OSD (On Screen Display) menu
4Volume +/-
Turns volume up or down.
5Channel Up/Down
Changes the TV channels sequentially.
6INPUT
Displays the available input sources.
7AUTO
- Used to adjusts the screen automatically when connected to the
Digital Visual Interface (DVI) or PC input.
- Used to launch the Program Table menu while watching analog TV
channels.
8I.SIZE (Image SIZE)
Used to select the picture size.
9MTS
Used to select the sound mode.
10 FREEZE
Freeze the display on the screen. The playback system will continue
playing.
11 Number keypad
Use number keypad to select the TV channel you want to watch.
12 RECALL
Display information.
13 SLEEP
Press this button to set timer off.
14 PIP Function Buttons
LOCATE :Used to select a location of the sub-picture. It is avail-
able in PIPmode only.
SIZE :Used to select a size of the sub-picture. It is available in PIP
mode only.
SWAP :Used to interchange the main picture and sub-picture.
It is available in PIPand PBPmode only.
A.SWAP :Used to select the audio for the main or sub-picture.
It is available in PIPand PBPmode only.
SPLIT :Used to select a PIPmode (NORMAL,PIP,PBP)
S.SELECT (Screen SELECT) :Used to select the main picture
or sub-picture. Then you can
adjust the status of selected
picture. It is available in PIPand
PBPmode only.
 
						

							13
User Manual BDS4241R
3.3.2  TELETEXT FUNCTION BUTTONS
1TEXT
Activates the TELETEXT mode.
2INPUT
Displays the TELETEXT index.
3Fastext
With Fastext, you can easily access the topic and relevant pages
you want by pressing the red, green, yellow and blue buttons on
the remote control.
In TELETEXT mode, volume controls remain available, but the 
relevant symbols are not shown on the screen.
4Page Down (AUTO)
Displays the previous TELETEXT page.
5Zoom (I.SIZE)
Press the I.SIZEbutton once to zoom in on the top part of the
screen.
Press twice to zoom in on the bottom part of the screen and
three times to return to normal display.
6Page Up (MTS)
Displays the next TELETEXT page.
7FREEZE
Freezes the current page, preventing update and subpage display.
•Press the HOLD/POSITION button on the remote control to
select this function.
•Press the HOLD/POSITION button again to cancel.
8Reveal
Reveals hidden page information. Press the Reveal button to show
the information again.
9Sub-page
Press to display a secondary page by entering its number.
3.3.3  INSERTING THE  BATTERIES  IN THE  REMOTE
CONTROL
1  Remove the cover on the rear of the remote control.
2  Insert two AAA size 1.5V batteries ensuring that the + and -
ends of the batteries are correctly aligned.
3  Replace the cover.
Note:
Do not mix battery types, e.g. alkaline and manganese.
 
						

							14
User Manual BDS4241R
4. CONNECTIONS TO EXTERNAL EQUIPMENT
4.1  CONNECTING TO AN AERIAL
To view TV channels correctly, a signal must be received using an
antenna. Connect the aerial or network input cable to the ANT jack on
the rear of the PDP.
Note:
When installing or re-installing your PDP, be sure to use the supplied
coaxial antenna cable. If you connect using a different coaxial cable,
there is risk of noise or interference to the screen image.
(You must not use another general purpose cable.
Use the 3M/5M/7M cable supplied by your dealer.)
• An outdoor aerial 
• A  cable TV  network
4.2  CONNECTING EXTERNAL EQUIPMENT (VCR,
DVD,CAMCORDER, SATELLITE RECEIVER)
4.2.1  USING SCART (AV) SOCKET INPUT
1  Connect the SCART socket of the external device to the SCART
socket of the PDP.
2  Connect the video recorder to the antenna wall socket or cable
box.
4.2.2  USING S-VIDEO INPUT
1  Connect the S-Video (4-pin DIN) connector of the external device
to the S-VIDEO INPUT of the PDP.
2  Connect the red (R) and white (L) audio jacks of the device to the
R and L audio-in jacks located next to the S-VIDEO connector.




 
						

							15
User Manual BDS4241R
4.2.3  USING COMPONENT VIDEO INPUT
1  Connect the green-colored (labeled as Y) jack of the device to
the green-colored Y jack of the PDP.
2  Connect the red-colored (labeled as Pr) jack of the device to the
red-colored PR/CR jack of the PDP.
3  Connect the blue-colored (labeled as Pb) jack of the device to
the blue-colored PB/CB jack of the PDP.
4  Connect the red (R) and white (L) audio jacks of the device to the
R and L audio-in jacks of the PDP.
4.2.4 USING VIDEO INPUT
1  Connect the jack of the external device to the VIDEO INPUT of
the PDP.
2  Connect the red (R) and white (L) audio jacks to the R and L
audio-in jacks located next to the VIDEO connector.
4.2.5 USING MONITOR OUTPUT
1  Connect the jack of the DVD or VCR (for recording) or audio 
system to the MONITOR OUTPUT of the PDP.
2  Connect the red (R) and white (L) audio jacks to the R and L
audio-in jacks located next to the VIDEO connector.
4.2.6  USING DVI INPUT
1  Connect the DVI-jack of the DVD, decoder or satellite receiver to
the DVI INPUT of the PDP.
2  Connect the red (R) and white (L) audio jacks to the R and L
audio jacks located next to the DVI connector.
 
						

							16
User Manual BDS4241R
4.3 EXTERNAL AUDIO CONNECTION
4.3.1  CONNECTING EXTERNAL SPEAKER
Connect the speaker audio cable to the external speaker output jack
on the rear of the PDP matching the “+” and “-” ends of the cable with
the diagram on the PDP.
• Before connecting the speaker wire to the PDP, turn off your PDP.




 
						

							17
User Manual BDS4241R
4.4 CONNECTING A PC
4.4.1  USING RGB (VGA) OR DVI VIDEO INPUT
1  Connect the 15-pin D-Sub RGB(VGA) connector of the PC to the
RGB-IN connector of the PDP.
If you have a PC that is equipped with a DVI (Digital Visual
Interface), you may connect the PC DVI connector from the PC to
the DVI-IN connector of the PDP.
2  For both RGB (VGA) and DVI, connect the red (R) and white (L)
audio jacks of the PC to the R and L (DVI/RGB) AUDIO IN jacks
of the PDP.
Setting Up Your Display Using Plug and Play
This display adheres to VESA Plug and Play standard to eliminate 
complicated and time consuming setup of monitors. This PDP 
identifies itself to the computer and automatically sends the PC its
Extended Display Identification Data (EDID) using Display Data
Channel (DDC) protocols.
How to Set up Your PC for Use with PDP (Windows)
The display settings for a typical Windows-based computer are shown
below. However, the actual screens on your computer will differ
depending on the version of Windows and video card equipped with
the computer. Even though the actual screen may look different from
example displayed below, basic set-up routine will apply in most cases.
1  Go to the Windows CONTROL PANEL by clicking START,
SETTINGS, CONTROL PANEL.
=> The CONTROL PANEL Window is displayed.
2  Select the DISPLAY icon from this window.
=> The DISPLAY PROPERTIES dialog box is displayed.
3  Select the SETTINGS tab to display your computers video output
settings.
4  Set the Screen Resolution settings to 1024x768 PIXELS. For
COLOR QUALITY, select 24 BIT COLOR (might also be
expressed as 16 million colors).
5  If a vertical-frequency option is available, set the value to 60 or 
60 Hz.
6  Click OK to complete the setting.
Note:
Both screen position and size will vary, depending on the type of PC
graphics card and its resolution selected. See page 36 for an overview
of the supported resolutions.1
2
3
4
5
 
						

							18
User Manual BDS4241R
5. BASIC FUNCTIONS
5.1  POWERING ON / OFF
Make sure the PDP is plugged into the wall outlet with the supplied
power cord.
If the power is plugged in, the STATUS LED on the control panel will
illuminate in red color.
Using Front Panel or Remote Control
1 Press the MENUbutton on the front panel or remote control.
=> The PDP will now turn on after a brief pause. The STATUS LED
will now turn green to indicate power on status.
2  Turn off the power by pressing the POWERbutton on the front
panel or the remote control again.
5.2 SELECTING SIGNAL SOURCE
Using Front Panel or Remote Control
1 Press the MENUbutton on the front panel or remote control.
2 Pressing the CH+or CH-button will cycle the PDP through all
available input signal sources in the following order:
TV - SCART 1 - SCART 2 - VIDEO - S-VIDEO - 
COMPONENT - RGB - DVI
3 Press the VOL+or VOL-button to select the source.
Main Input
Move [- CH +]     Select [- VOL +]     Exit [MENU]TV
SCART 1
SCART 2
VIDEO
S-VIDEO
COMPONENT
RGB
DVI
 
						

							19
User Manual BDS4241R
5.3 VOLUME ADJUSTMENT
Using Front Panel or Remote Control
1 Press the MENUbutton on the front panel or remote control.
2 Press the VOL+or VOL-button to select Audio.
3 Press the CH-button to enter the selected menu group.
4 Press the VOL+or VOL-button to adjust the sound volume.
Note:
If the PDPs built-in speakers are turned off, then the volume 
controls will not affect volume generated by the built-in speaker.
5.4 MUTE
Using Remote Control
1 Press the MUTEbutton on the remote control.
=> The audio is cut off.
2 Press the MUTE,VOL+or VOL-button to turn the audio 
back on.
Image Screen Setup  Audio
Move [- CH +]     Adjust [- VOL +]     Exit [MENU]
Volume 60 
Treble 055 
Bass 072 
Balance 043 
Mute ON OFF
Audio Preset [-VOL+]  to Preset Audio
Image Screen Setup  Audio
Move [- CH +]     Select [- VOL +]     Exit [MENU]
Volume 60 
Treble 055 
Bass 072 
Balance 043 
Mute ON OFF
Audio Preset [-VOL+]  to Preset Audio
 
						

							20
User Manual BDS4241R
5.5 DISPLAY INFORMATION
Via Remote Control
Press the RECALLbutton to display the channel information and set-
ting status. Press again to exit.
Note:
The displayed information can differ, depending on the selected source.
001-ABCTIMER OFF
TV