Philips Bclever Sv1 Projector User Manual

>
Feedback messages
Feedback messages are displayed in the top right corner of the screen. They are displayed when:
–a signal comes up or goes down;
–an input source is changed;
–the Freeze, Mute or A/V Mute function is activated;
–the Child lock, Zoom function is (de-)activated;
–the local keyboard or remote control is used when Child lock is activated;
–the Info button is pressed.
Error messages
Error messages are displayed when there is a serious technical problem. They can occur at any time
during...

All video and data adjustments and settings (except Volume, Mute and A/V Mute) are done via 
On Screen Displaysand with help of Menu, OK and Cursor Control on the projector or the
remote control. The projector is set to standard specifications at the factor y. However, you can
adjust these specifications to suit your own preferences. The projector menu screens allow you
to adjust the various projector settings (for both data and Video). For explanation and operation
see next pages.
DATA MODE Main menu...

>
VIDEO/S-VIDEO/COMPONENT MODE
Main menu Sub menu Setting
PictureBrightness 0 (min) - 100 (max)
Contrast 0 (min) -100 (max)
Picture Format 16:9
16:9 enlarged
16:9 in 4:3
4:3
4:3 to 16:9
Colour tracking vivid natural
Colour
temperature warm 
normal
cool
Sharpness 0 (soft) - 5 (sharp)
Hue (NTSC only) 0 (min) - 100 (max)
Saturation min max
FeaturesZoom Off
4 x
9 x
16 x
Freeze On Off
Key lock Off
Star t-up screen Philips
Personal
None
Source Auto
Data
RGB sync
YPbPr
RGBsog
S-Video
VideoMenu tree
Philips...

GENERAL ADJUSTMENTS/SETTINGS
Main menu Sub menu Setting
Set upLanguage Deutsch
English
Français
Español
Italiano
Nederlands
Por tuguês
∑
Picture size 0.50 x - 1.00 x
Keystone
Monitor out On Off
Mirror
Auto Component
Selection YPbPr RGBsog
Smar tSave Off
5 minute - 60 minutes
Feedback Off On
Lamp counter Lamp used for : 0
System information OK
Factor y settings OK (3 sec.)
AABB
Menu tree
Philips Multimedia Projector24English User guide bClever SV1
5. Operation >On Screen Display Menu 

>
1Press Menu.
–The menu bar appears on the screen.
The ‘Picture’item is highlighted.
Depending on the selected source (Auto, Data, RGBsync, YPbPr, RGBsog, S-Video, Video)
some options of the submenu may be greyed out. This indicates that these functions:
– are not available in a cer tain mode,
– have no function for the selected source.
For example:Hue under menu ‘Picture’when signaltype is not NTSC .
2Use Cursor Control left and/or right to move the cursor to any other item in the menu bar.
3Select the...

>
For data signal input, the following ‘Picture’and ‘Features’adjustments can be made.
Picture adjustments
•Press Menu and select ‘Picture’in the menu bar. The following ‘Picture’adjustments can now
be made, following the instructions under ‘General explanation’and the screen.
– Brightness
to adjust the brightness of the displayed picture;
– Contrast
to adjust the overall contrast intensity;
– Picture Format
to select one of five picture format options (16:9, 16:9 enlarged, 16:9 in 4:3, 4:3, 4:3 to...

>
For Video/S-Video/Component signal input, the following ‘Picture’and ‘Features’adjustments can
be made:
Picture adjustments
•Press Menu and select ‘Picture’in the menu bar. The following ‘Picture’adjustments can now
be made, following the instructions under ‘General explanation’and the screen.
– Brightness
to adjust the brightness of the displayed picture;
– Contrast
to adjust the overall contrast intensity;
– Picture Format
to select one of six picture format options (16:9, 16:9 enlarged, 16:9 in 4:3,...

Set up adjustments
The projector is equipped with the following functions to optimize its use and handling:
•Press Menu and select ‘Set up’in the menu bar. The following settings/adjustments can now
be made for both Data, Component and Video/S-video input, following the instructions
under ‘General explanation’and the screen:
– Language
to select the required menu language;
– Picture size
to reduce/enlarge the size of the projected picture;
– Keystone
to correct picture distor tion of the ver tical...

The following settings/adjustments follow a slightly different procedure or may need some 
fur ther explanation. 
Zoom/Magnification 
‘Zoom ’is used to enlarge a par t of the picture.
1 Press Menu.
– The menu bar appears on the screen.
2 Use Cursor Control to select  ‘Zoom ’in the  ‘Features ’menu.
3 Use the Cursor Control to adjust the Zoom factor.
– The selected Zoom factor (4x, 9x, 16x or Off) will be displayed.
4 Use Cursor Control to select another section of the enlarged area ( ‘Panning ’).
You can...

Personal Start-up text
1Press Menu.
–The menu bar appears on the screen.
2Use Cursor Control to select ‘Star t-up screen’in the ‘Features’menu.
3Use Cursor Control to select ‘Personal’.
•You can now enter your personal Star t-up text with a maximum of 14 characters.
Use Cursor Control Up/Down to select characters.
Use Cursor Control Left/Right to move to a previous/next position.
4Confirm with OK.
5Press OK again to return to the main menu..
Philips Multimedia Projector30English User guide bClever SV1
5....