Philips 46pfl9715k User Manual

							First,   use  3   antenna  cables   to  connect   the   devices  to  the   TV.
Then   use  an   HDMI   cable   to  connect   the   digital   receiver   to  the
TV.
Then   use  an   HDMI   cable   to  connect   the   Disc   Recorder  to  the
TV.
Then   use  an   HDMI   cable   to  connect   the   Home  Theatre  System
to  the   TV.
Connections  /   Connect  devices61
 
						

							If   you   do   not   use  the   HDMI -ARC   connection   on   the   TV   and
the   device,   add   a  digital   audio   cable   (cinch   coaxial).
Digital HD  receiver
If   you   use  a  digital   receiver   to  watch   TV   (a  set   top   box  -  STB)
and  you   do   not   use  the   remote   control   of   the   TV,   then  switch
off   the   automatic  switch   off.  This   will   prevent   the   TV   from
switching   off   automatically  after   a  4   hour  period   without   a  key
press   on   the   remote   control   of   the   TV.
To   switch   off   the   automatic  switch   off,  press   the  green  key  while
you   are   watching   TV   channels   and  select  Auto   switch   off and
select  Off.
First,   use  2   antenna  cables   to  connect   the   device   to  the   TV.
62Connections  /   Connect  devices
 
						

							Use  an   HDMI   cable   to  connect   the   device   to  the   TV.
Connections  /   Connect  devices63
 
						

							5.4Connect more devices
Game
Connect  a  game  console   to  the   side  or  back   of   the   TV.   You   can
use  an   HDMI,  YPbPr   or  SCART  connection.  If   your   game  console
only  has   Video  (CVBS)   and  Audio  L/R  output,   use  a  Video   Audio
L/R   to  SCART   adapter  to  connect   to  the   SCART  connection.
Read  more   about   Games  in   Help > More  TV  > Games.
Use  an   HDMI   cable   to  connect   the   device   to  the   side  of   the   TV.
Or   use  a  SCART  adapter  to  connect   the   device   to  the   TV.
HD  Game
Use  an   HDMI   cable   or  YPbPr   and  Audio  L/R  cables   to  connect   a
High   Definition  game  console   to  the   TV.
To   connect   a  HD   Game  console,  read  Help > Connections  >
Connect  more  devices  > Game.
Photo camera
To   view   photos  stored  on   your   digital   photo   camera,   you   can
connect   the   camera  directly   to  the   TV.   Use  the   USB   connection
on   the   side  of   the   TV   to  connect.  Switch   on   the   camera  after
you   made  the   connection.
64Connections  /   Connect  more   devices
 
						

							If   the   list   with   the   content   of   the   camera  does  not   appear
automatically,   your   camera  might  need  to  be  set   to  transfer  its
content   with   PTP   (Picture   Transfer   Protocol).  Read  the   user
manual   of   the   digital   photo   camera.
Camcorder
Connect  a  camcorder   to  the   side  or  back   of   the   TV.   You   can
use  an   HDMI,  YPbPr   or  SCART  connection.  If   your   camcorder
only  has   Video  (CVBS)   and  Audio  L/R  output,   use  a Video   Audio
L/R   to  SCART   adapter  to  connect   to  the   SCART  connection.
See  the   following  pages  to  connect   your   camcorder.
Use  an   HDMI   cable   to  connect   the   camcorder   to  the   side  of   the
TV.
Or   use  a  SCART  adapter  to  connect   the   device   to  the   TV.
Connections  /   Connect  more   devices65
 
						

							TV as PC monitor
You   can   connect   the   TV   to  your   home   network   wireless.   With
Wi-Fi  MediaConnect,  you   can   use  the   TV   as   a  PC monitor.  Read
Help  > Setup  > Network  > Wi -Fi   MediaConnect .
Read  on   to  connect   a  computer  to  the   TV   as   a  PC  monitor
wired.  You   can   use  a  VGA  cable   or  a  DVI  to  HDMI   adapter.
Use  a  VGA  cable   to  connect   the   PC  to  the   VGA  connector   and
an   audio   L/R  cable   to  connect   the   VGA  Audio  L/R  to  the   back
of   the   TV.
Use  a  DVI  to  HDMI   adapter  to  connect   the   PC  to  HDMI   and  an
audio   L/R  cable   to  connect   the   Audio  L/R  to  the   back   of   the   TV.
66Connections  /   Connect  more   devices
 
						

							Ideal  TV  setting
Set   the   TV   picture   format   to  Unscaled   for   the   sharpest   picture
quality.   While   watching   TV,   press  rOPTIONS ,  select Picture
format   and  select  Unscaled.
For  a  list   of   supported   resolutions   see  Help > Specifications  >
Display   resolutions .
Decoder
Use  a  SCART  cable   to  connect   a  decoder   that  decodes  analogue
antenna  channels.  Use  the   EXT1  connector   on   the   back   of   the
TV.
You   have   to  assign   the   TV   channel  as   a  channel  to  be  decoded.
Then   assign   the   connection   where   the   decoder   is  connected.
To   assign   this   TV   channel,   press   h > Setup  > Channel  settings
>  Decoder .  Select  Channel  to  set   up  the   channel  that  you   want
to  decode.   Select   Status  to  set   the   connection   you   use  for   the
decoder.
Connections  /   Connect  more   devices67
 
						

							5.5Network
Wireless
To   set   up  the   wireless  network   connection,  read  Help > Setup  >
Network .
Wired
To   set   up  the   wired  network   connection ,  read Help > Setup  >
Network
Connect  the   router   to  the   TV   with   a  network   cable.  To   fulfil
EMC   regulations,  use  a  shielded  FTP  Cat.   5E  Ethernet   cable.
68Connections  /   Network
 
						

							5.6SD card
Memory size
To   store   videos   downloaded   from  a  Video  store   on   Net  TV,   you
need  to  insert   an   SD  memory  card   into  the   TV   SD  card   slot.
Once  formatted,  leave  the   card   permanently  in   the   slot.
SD  memory  card  size
Use  a  SD  HC  (High   Capacity)   memory  card   with   at  least  4GB  of
storage  capacity.
For  high -definition  (HD)   video,  use  an   SD  card   with   at  least  8GB
of   storage  capacity.   Use  a  speed  class  2   card   or  more.
Read  more   about   renting   videos   in   Help > More  TV  > Net   TV
>  Video   stores .
Insert the  card
Make   sure  to  unlock  the   SD  memory  card   before   you   insert   it.
To   format   the   SD  card,  switch   on   the   TV   and  insert   the   SD  card
into  the  SD  card   slot .  The  TV   will   automatically  start   formatting.
Leave   the   SD  card   permanently  in   the   slot.
Connections  /   SD  card69
 
						

							5.7Common interface CAM
CAM
Scrambled  digital   TV   channels   can   be  decoded   with   a  Conditional
Access   Module  (CAM).  Digital   TV   service   operators   provide  the
CAM   when   you   subscribe  to  their   services.  Contact   a  digital   TV
service   operator   for   more   information  and  to  see  terms   &
conditions.
Insert   a  CAM
Switch   off   the   TV   before   inserting   a  CAM.
Look  on   the   CAM   for   the   correct   method  of   insertion.  Incorrect
insertion   can   damage   the   CAM   and  the   TV.
Look  for   the   common  interface   slot   on   the   back   of   the   TV.
Gently   insert   the   CAM   as   far  as   it   will   go  and  leave  it   in   the   slot
permanently.
It  can   take  a  few  minutes  before   the   CAM   is  activated.  Removing
the   CAM   will   deactivate  the   service   on   TV.
Watching  a  CAM   service
If   a  CAM   is  inserted   and  subscription   fees  have   been  paid,   the
TV   shows   the   programme   from  the   digital   TV   service   provider.
The  applications,   their   function,   the   content   and  the   onscreen
messages  all   come  from  the   CAM   service.
CAM   settings
To   set   passwords  or  PIN   codes  for   the   CAM   service,  press   h
>  Setup  > Channel  settings  > Common  Interface .  Select   the
CAM   provider  and  press   OK.
CI+
This   TV   can   handle   the   CI+  conditional  access.
CI+  allows  service   providers   to  offer   premium  HD   digital
programmes   like   movies  and  sports  with   a  high   level  of   copy
protection.
To   insert   a  CI+  CAM,  read  chapter  CAM   -  Conditional  Access
Module.
70Connections  /   Common   interface   CAM