Philips 46pfl8605k User Manual

4.1.5      Eco  settings
1/2
Eco settings bundle the TV settings that help the
environment.
While watching TV, press the Green key to open Eco
settings. Active settings are marked with a ê.
Press again to close. Energy saving
This Smart picture setting sets the picture, together with
Ambilight, in the most ideal energy conscious setting. To
switch on, select Energy saving in Eco settings and press
OK.
To switch off Energy saving, select another Smart picture
in the 
s Adjust menu.
. . .
 

4.1.5      Eco  settings
2/2
Mute screen
If you only listen to music, you can mute the TV screen to
save energy. Select Mute screen and press OK. To switch
the screen back on, press any key on the remote control. Light sensor
The built-in light sensor automatically adjusts the picture,
together with Ambilight, to the lighting conditions of the
room. To switch on, select Light sensor and press OK. To
switch off, press OK again.
 

4.2.1   Reorder and rename
You can reorder and rename channels in the Channel list.
To reorder or rename a channel, read Help > Use your TV >
Menus > 
e Browse.
 

4.2.2      Update  channels
1/3
On first use, the TV installed all channels in the Channel
list. If the TV installed digital channels, the TV can
automatically update the Channel list with new channels.
You can also start an update of the Channel list yourself.
The update is for digital channels only. Automatic channel update
Once a day, at 6 AM, the TV updates the channels and
stores new channels. Empty channels are removed. For
new or removed channels, a message is shown at TV start
up. The TV must be...

4.2.2      Update  channels
2/3
To switch off the message at start up, press 
h > Setup >
Channel settings and press OK. Select Channel installation
> Channel update message and select Off. To switch off the automatic channel update, press h >
Setup > Channel settings and press OK. Select Channel
installation > Automatic channel update and select Off.
. . .
 

4.2.2      Update  channels
3/3
Start an update
To start an update the channel list for new channels
yourself, press 
h > Setup > Search for channels and press
OK. Select Update channels and press OK. Press Start. The
update can take a few minutes. Follow the instructions on
screen.
 

4.2.3      DVB-T  or  DVB-C
1/2
If both DVB-T and DVB-C reception is available in your
country and if this TV is ready to receive DVB-T and DVB-
C for your country, you will have selected one or the other
with the channel installation on first use. If you want to change the DVB setting to start a new
channel installation, press 
h > Setup > Channel settings
and press OK. Select Channel installation > Antenna or
Cable DVB and press OK. Select the DVB setting you want.
. . .
 

4.2.3      DVB-T  or  DVB-C
2/2
DVB-C channel installation
For ease of use, all DVB-C settings are set to automatic. If
your DVB-C provider gave you specific DVB-C values, like a
symbol rate or a frequency, enter these values when the TV
asks for them during installation. DVB-T + DVB-C
You can set up your TV for DVB-T and DVB-C. Install one
system followed by the other. When both installations are
complete, the Channel list will show both DVB-T and DVB-
C channels.
 

4.2.4   Reinstall channels
On first use, the TV installed all channels in the Channel
list. You can redo this full installation to reset your
language, country and install all available TV channels. Full installation
To reinstall the TV, press 
h > Setup > Search for channels
and press OK. Select Reinstall channels and press OK.
Press Start. The update can take a few minutes. Follow the
instructions on screen.
You can reorder and rename channels in the Channel list.
 

4.2.5      Digital  reception  quality
1/3
If you receive digital TV broadcasting (DVB), you can check
the quality and signal strength of a channel.
If you use an antenna, you can reposition the antenna to
try and improve the reception. To check the reception quality of a digital channel,
switch to the channel and press 
h > Setup > Channel
settings and press OK. Select Channel installation > Digital :
reception test and press OK.
. . .