Philips 46pfl8605k User Manual

3.4.1      Child  locks
1/5
To prevent children from watching a channel or a
programme, you can lock channels or block age-rated
programmes. Parental rating
Some digital broadcasters have programmes rated. When
the rating is equal or higher than the rating you have set
for your child’s age, the programme will be blocked.
. . .
 

3.4.1      Child  locks
2/5
To watch a blocked programme you must enter the Child
lock code. The parental age rating is set for all channels. Set an age rating
Press 
h and select Setup > Channel settings and select
Child lock > Parental rating.
To select an age rating, you must first enter your 4 digit
child lock code. If no child lock code is set, you can set the
code now.
. . .
 

3.4.1      Child  locks
3/5
When the code is entered, you can select the age rating.
When the rating of a programme is equal or higher
than the rating you have set for your child's age, the
programme will be blocked. The TV will ask for the code to
unblock the programme. For some operators, the TV only
blocks programmes with a higher rating. Lock a channel
To lock a channel, press 
h and select Setup > Channel
settings and select Child lock > Channel lock. In the list of
channel numbers, select a...

3.4.1      Child  locks
4/5
In the list, a locked channel is marked with an X. Now, you
can select another channel to lock or unlock. The lock is
activated as soon as you close the menu.
You cannot lock programmes from connected devices. Change code
To change the current code, press 
h and select Setup >
Channel settings and select Child lock > Change code.
Enter the current code and then enter the new code twice.
The new code is set.
 

3.4.1      Child  locks
5/5
Forgotten your code ?
To override the code if you forget it, enter 8888.
 

3.4.2   Sleep timer
With Sleep timer you can switch the TV to standby at a
specified time. To set the sleep timer, press h
 > Setup > TV settings >
Preferences > Sleep timer. With the slider bar you can set
the time up to 180 minutes in increments of 5 minutes. If
set to 0 minutes, Sleep timer is switched off.
You can always switch off your TV earlier or reset the time
during the countdown.
 

3.5.1      Subtitles
1/4
Programme subtitles are available most of the time.
You can set subtitles to be constantly displayed. How to
set constant subtitles depends on whether a channel
is analogue or digital. For digital channels, a preferred
subtitle language can be set. For analogue channels
To show subtitles of a channel, switch to the channel and
press 
e (Browse), select Text and press OK. Enter the
number of the page that shows subtitles, usually 888, and
press 
e (Browse) again to close Text....

3.5.1      Subtitles
2/4
For digital channels
There is no need to activate subtitles in Text for digital
channels. You can set a preferred primary and secondary
subtitle language. If these subtitle languages are not
available for a channel, you can select another available
subtitle language. To set the primary and secondary subtitle language,
press 
h and select Setup > Channel settings and select
Languages > Primary and Secondary subtitles.
. . .
 

3.5.1      Subtitles
3/4
To select a subtitle language when none of your preferred
languages is shown, press 
o (Options), select Subtitle
language and select a language you want temporarily.
Subtitle menu
To open the subtitle menu, press j.
. . .
 

3.5.1      Subtitles
4/4
In the Subtitle menu, you can switch subtitles On or Off.
Select On during mute to show subtitles only when the
sound is muted with 
m.