Philips 46pfl8605k User Manual
Have a look at the manual Philips 46pfl8605k User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4.1.5 Eco settings 1/2 Eco settings bundle the TV settings that help the environment. While watching TV, press the Green key to open Eco settings. Active settings are marked with a ê. Press again to close. Energy saving This Smart picture setting sets the picture, together with Ambilight, in the most ideal energy conscious setting. To switch on, select Energy saving in Eco settings and press OK. To switch off Energy saving, select another Smart picture in the s Adjust menu. . . .
4.1.5 Eco settings 2/2 Mute screen If you only listen to music, you can mute the TV screen to save energy. Select Mute screen and press OK. To switch the screen back on, press any key on the remote control. Light sensor The built-in light sensor automatically adjusts the picture, together with Ambilight, to the lighting conditions of the room. To switch on, select Light sensor and press OK. To switch off, press OK again.
4.2.1 Reorder and rename You can reorder and rename channels in the Channel list. To reorder or rename a channel, read Help > Use your TV > Menus > e Browse.
4.2.2 Update channels 1/3 On first use, the TV installed all channels in the Channel list. If the TV installed digital channels, the TV can automatically update the Channel list with new channels. You can also start an update of the Channel list yourself. The update is for digital channels only. Automatic channel update Once a day, at 6 AM, the TV updates the channels and stores new channels. Empty channels are removed. For new or removed channels, a message is shown at TV start up. The TV must be in Standby to automatically update channels. . . .
4.2.2 Update channels 2/3 To switch off the message at start up, press h > Setup > Channel settings and press OK. Select Channel installation > Channel update message and select Off. To switch off the automatic channel update, press h > Setup > Channel settings and press OK. Select Channel installation > Automatic channel update and select Off. . . .
4.2.2 Update channels 3/3 Start an update To start an update the channel list for new channels yourself, press h > Setup > Search for channels and press OK. Select Update channels and press OK. Press Start. The update can take a few minutes. Follow the instructions on screen.
4.2.3 DVB-T or DVB-C 1/2 If both DVB-T and DVB-C reception is available in your country and if this TV is ready to receive DVB-T and DVB- C for your country, you will have selected one or the other with the channel installation on first use. If you want to change the DVB setting to start a new channel installation, press h > Setup > Channel settings and press OK. Select Channel installation > Antenna or Cable DVB and press OK. Select the DVB setting you want. . . .
4.2.3 DVB-T or DVB-C 2/2 DVB-C channel installation For ease of use, all DVB-C settings are set to automatic. If your DVB-C provider gave you specific DVB-C values, like a symbol rate or a frequency, enter these values when the TV asks for them during installation. DVB-T + DVB-C You can set up your TV for DVB-T and DVB-C. Install one system followed by the other. When both installations are complete, the Channel list will show both DVB-T and DVB- C channels.
4.2.4 Reinstall channels On first use, the TV installed all channels in the Channel list. You can redo this full installation to reset your language, country and install all available TV channels. Full installation To reinstall the TV, press h > Setup > Search for channels and press OK. Select Reinstall channels and press OK. Press Start. The update can take a few minutes. Follow the instructions on screen. You can reorder and rename channels in the Channel list.
4.2.5 Digital reception quality 1/3 If you receive digital TV broadcasting (DVB), you can check the quality and signal strength of a channel. If you use an antenna, you can reposition the antenna to try and improve the reception. To check the reception quality of a digital channel, switch to the channel and press h > Setup > Channel settings and press OK. Select Channel installation > Digital : reception test and press OK. . . .