Philips 46pfl6606m User Manual

     
EN      31   
English
 
To switch Teletext 2.5 on or off 
1. Press . 2. Select [Setup] > [TV settings] > 
[Preferences]. 
3. Select [Text 2.5] > [On] or [Off], then 
press OK.  
Set locks and timers 
Clock 
You can display a clock on the TV screen. 
The clock displays the time that is broadcast 
by your TV service operator. 
 
Display the TV clock 
1. While you watch TV, press  OPTIONS. 
2. Select [Status], then press OK.   
The clock is displayed on the lower right 
hand corner of the TV screen....

  
EN      32       
Parental rating 
Some digital broadcasters rate their 
programmes according to age. You can set 
your TV to display only programmes with 
age ratings lower than your childs age. 
1. Press . 2. Select [Setup] > [Channel settings] or 
[Satellite settings]. 
3. Select [Child lock] > [Parental rating].   
A message prompts you to enter the child 
lock code.   
4. Enter the child lock code with the Numeric buttons. 
5. Select an age rating, then press OK.   
All programmes above the...

     
EN      33   
English
 
1. Connect the USB storage device to the 
TV. 
2. Press . 3. Select [Browse USB], then press OK. 
4. Select a picture, then press  OPTIONS. 
5. Select [Set as Scenea], then press OK. 
6. Select [Yes], then press OK. 
7. Press any button to exit Scenea. 
  
Set Scenea lounge light 
When the TV is in standby, you can switch 
on Ambilight and create a lounge light effect 
with your wallpaper. Ambilight is available on 
certain models only. 
When the TV is in standby, press...

  
EN      34       
 Connect at least two HDMI-CEC 
compliant devices through HDMI 
 Configure each HDMI-CEC compliant 
device properly 
 Switch on EasyLink  
Switch on 
To switch on or off EasyLink 
Note: If you do not intend to use Philips 
Easylink, switch it off.  
1. Press . 2. Select [Setup] > [TV settings] > 
[EasyLink]. 
3. Select [On] or [Off], then press OK. 
  
Control devices simultaneously 
If you connect multiple HDMI-CEC devices 
that support this setting, all the devices 
respond to...

     
EN      35   
English
 
  
Select speaker output with Adjust menu 
If [EasyLink] or [EasyLink autostart] are 
selected, access the adjust menu to switch 
the TV audio. 1. While you watch TV, press  ADJUST. 
2. Select [Speakers], then press OK. 
3. Select one of the following, then press OK: 
 [TV]: On by default.   
Stream TV audio through the TV and 
the connected HDMI-CEC audio 
device until the connected device 
switches to system audio control. TV 
audio is then streamed through the 
connected...

  
EN      36       
4 Set up your TV 
Settings assistant 
Use the settings assistant to guide you 
through the picture and sound settings. 
1. While you watch TV, press . 2. Select [Setup] > [Quick picture and 
sound settings], then press OK. 
3. Select [Start], then press OK.   
4. Follow the onscreen instructions to 
choose your preferred settings.  
Picture and sound 
More picture settings 
1. Press . 2. Select [Setup] > [TV settings] > 
[Picture], then press OK. 
3. Select a setting to adjust: 
...

     
EN      37   
English
 Audio settings 
Select audio language 
If the TV channel has multiple or dual sound 
broadcast, you can select the preferred 
audio language. 
While you watch TV, press  OPTIONS. 
 [Audio language]: Select the audio 
language for digital channels. 
 [Dual I-II]: Select the audio language for 
analogue channels.   
Digital TV channels can stream several audio 
languages. If multiple languages are available, 
select the preferred language.  
1. Press . 2. Select [Setup] >...

  
EN      38       
Update channel list 
When the TV was switched on for the first 
time, a full installation of channels was 
performed. 
You can automatically add or remove digital 
channels or manually update channels. 
Note: If you are prompted to enter a code, 
enter 8888. 
Automatic update 
To automatically add or remove digital 
channels, leave the TV in standby mode. The 
TV updates channels and stores new 
channels everyday. Empty channels are 
removed from the channel list.   
If a channel...

     
EN      39   
English
 
 Select [Search] then press OK to 
search for the next channel 
automatically.   
3. When the correct channel frequency is entered, select [Done], then press OK. 
4. Select [Store as new channel], then press 
OK to store the new TV channel.  
Install digital and satellite channels 
Install digital channels 
To improve TV reception, reposition the 
antenna. You need to know the correct 
frequency to tune. For best results, contact 
the service provider or get a professional...

  
EN      40       
 the same hardware type, as indicated 
by the sticker on the back of the TV, 
(for example Qxxx.xx.Lx), and 
 compatible software versions. 
An onscreen message will notify you if the 
channel list cannot be copied to the second 
TV. 
Note: If you are prompted to enter a code, 
enter 8888. 
Copy channel list to USB 
1. Connect a USB storage device to the TV 
with the channels installed on it. 
2. Press . 
3. Select [Setup] > [TV settings] > 
[Preferences] > [Channel list copy] >...