Philips 46pfl6606m User Manual
Have a look at the manual Philips 46pfl6606m User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 27
EN 27
English
To check if the programme guide supports
recording:
Press and select [Programme guide]. If
you find a [TV Recording] button on the
programme guide page, you can set up and
manage recordings.
If the [TV Recording] button is not present,
ensure that the programme guide data is set
to be updated through the network. Select > [Setup] > [TV settings] >
[Preferences] > [Programme guide] >
[From network].
Hard disk installation
Before you can record a TV programme,...](http://img.usermanuals.tech/thumb/59/54354/w64_philips_46pfl6606m-user-manual-26.png "Page 27
EN 27
English
To check if the programme guide supports
recording:
Press and select [Programme guide]. If
you find a [TV Recording] button on the
programme guide page, you can set up and
manage recordings.
If the [TV Recording] button is not present,
ensure that the programme guide data is set
to be updated through the network. Select > [Setup] > [TV settings] >
[Preferences] > [Programme guide] >
[From network].
Hard disk installation
Before you can record a TV programme,...")
![Page 28
EN 28
If your TV remote control does not have a
button:
1. Press and select [Programme guide].
2. With the current TV programme selected, press OPTIONS and select [Record].
The TV sets the end time of the recording
to the end of the programme. 3. Select [Schedule]and press OK to start
recording.
To stop recording immediately, press
(stop).
Notes:
While recording, you cannot switch TV
channels.
While recording, you cannot pause the
TV broadcast.
Schedule a...](http://img.usermanuals.tech/thumb/59/54354/w64_philips_46pfl6606m-user-manual-27.png "Page 28
EN 28
If your TV remote control does not have a
button:
1. Press and select [Programme guide].
2. With the current TV programme selected, press OPTIONS and select [Record].
The TV sets the end time of the recording
to the end of the programme. 3. Select [Schedule]and press OK to start
recording.
To stop recording immediately, press
(stop).
Notes:
While recording, you cannot switch TV
channels.
While recording, you cannot pause the
TV broadcast.
Schedule a...")
![Page 29
EN 29
English
1. Select the recording in the list and press OPTIONS.
2. Select [Delete recording] and press OK.
Cancel a scheduled recording
To cancel a scheduled recording:
1. Select the recording and press OPTIONS.
2. Select [Cancel recording] and press OK.
Expired recordings
Broadcasters can limit the number of days a
recording can be viewed after airing or
restrict playback. A recording in the list can
show the number of days before it expires.
An expired recording can...](http://img.usermanuals.tech/thumb/59/54354/w64_philips_46pfl6606m-user-manual-28.png "Page 29
EN 29
English
1. Select the recording in the list and press OPTIONS.
2. Select [Delete recording] and press OK.
Cancel a scheduled recording
To cancel a scheduled recording:
1. Select the recording and press OPTIONS.
2. Select [Cancel recording] and press OK.
Expired recordings
Broadcasters can limit the number of days a
recording can be viewed after airing or
restrict playback. A recording in the list can
show the number of days before it expires.
An expired recording can...")
![Page 30
EN 30
View Teletext
Select a page
1. Select a channel that has teletext feature, then press TEXT.
2. Select a page in one of the following ways:
Enter the page number with the Numeric buttons.
Press or to view the next or
previous page.
Press the Colour buttons to select a
colour coded item.
3. Press EXIT to exit.
Teletext options
1. When you view teletext, press OPTIONS.
2. Select one of the following options:
[Freeze page] / [Unfreeze page]:
Freeze or unfreeze...](http://img.usermanuals.tech/thumb/59/54354/w64_philips_46pfl6606m-user-manual-29.png "Page 30
EN 30
View Teletext
Select a page
1. Select a channel that has teletext feature, then press TEXT.
2. Select a page in one of the following ways:
Enter the page number with the Numeric buttons.
Press or to view the next or
previous page.
Press the Colour buttons to select a
colour coded item.
3. Press EXIT to exit.
Teletext options
1. When you view teletext, press OPTIONS.
2. Select one of the following options:
[Freeze page] / [Unfreeze page]:
Freeze or unfreeze...")
![Page 31
EN 31
English
To switch Teletext 2.5 on or off
1. Press . 2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Text 2.5] > [On] or [Off], then
press OK.
Set locks and timers
Clock
You can display a clock on the TV screen.
The clock displays the time that is broadcast
by your TV service operator.
Display the TV clock
1. While you watch TV, press OPTIONS.
2. Select [Status], then press OK.
The clock is displayed on the lower right
hand corner of the TV screen....](http://img.usermanuals.tech/thumb/59/54354/w64_philips_46pfl6606m-user-manual-30.png "Page 31
EN 31
English
To switch Teletext 2.5 on or off
1. Press . 2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Text 2.5] > [On] or [Off], then
press OK.
Set locks and timers
Clock
You can display a clock on the TV screen.
The clock displays the time that is broadcast
by your TV service operator.
Display the TV clock
1. While you watch TV, press OPTIONS.
2. Select [Status], then press OK.
The clock is displayed on the lower right
hand corner of the TV screen....")
![Page 32
EN 32
Parental rating
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with
age ratings lower than your childs age.
1. Press . 2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Child lock] > [Parental rating].
A message prompts you to enter the child
lock code.
4. Enter the child lock code with the Numeric buttons.
5. Select an age rating, then press OK.
All programmes above the...](http://img.usermanuals.tech/thumb/59/54354/w64_philips_46pfl6606m-user-manual-31.png "Page 32
EN 32
Parental rating
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with
age ratings lower than your childs age.
1. Press . 2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Child lock] > [Parental rating].
A message prompts you to enter the child
lock code.
4. Enter the child lock code with the Numeric buttons.
5. Select an age rating, then press OK.
All programmes above the...")
![Page 33
EN 33
English
1. Connect the USB storage device to the
TV.
2. Press . 3. Select [Browse USB], then press OK.
4. Select a picture, then press OPTIONS.
5. Select [Set as Scenea], then press OK.
6. Select [Yes], then press OK.
7. Press any button to exit Scenea.
Set Scenea lounge light
When the TV is in standby, you can switch
on Ambilight and create a lounge light effect
with your wallpaper. Ambilight is available on
certain models only.
When the TV is in standby, press...](http://img.usermanuals.tech/thumb/59/54354/w64_philips_46pfl6606m-user-manual-32.png "Page 33
EN 33
English
1. Connect the USB storage device to the
TV.
2. Press . 3. Select [Browse USB], then press OK.
4. Select a picture, then press OPTIONS.
5. Select [Set as Scenea], then press OK.
6. Select [Yes], then press OK.
7. Press any button to exit Scenea.
Set Scenea lounge light
When the TV is in standby, you can switch
on Ambilight and create a lounge light effect
with your wallpaper. Ambilight is available on
certain models only.
When the TV is in standby, press...")
![Page 34
EN 34
Connect at least two HDMI-CEC
compliant devices through HDMI
Configure each HDMI-CEC compliant
device properly
Switch on EasyLink
Switch on
To switch on or off EasyLink
Note: If you do not intend to use Philips
Easylink, switch it off.
1. Press . 2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [On] or [Off], then press OK.
Control devices simultaneously
If you connect multiple HDMI-CEC devices
that support this setting, all the devices
respond to...](http://img.usermanuals.tech/thumb/59/54354/w64_philips_46pfl6606m-user-manual-33.png "Page 34
EN 34
Connect at least two HDMI-CEC
compliant devices through HDMI
Configure each HDMI-CEC compliant
device properly
Switch on EasyLink
Switch on
To switch on or off EasyLink
Note: If you do not intend to use Philips
Easylink, switch it off.
1. Press . 2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [On] or [Off], then press OK.
Control devices simultaneously
If you connect multiple HDMI-CEC devices
that support this setting, all the devices
respond to...")
![Page 35
EN 35
English
Select speaker output with Adjust menu
If [EasyLink] or [EasyLink autostart] are
selected, access the adjust menu to switch
the TV audio. 1. While you watch TV, press ADJUST.
2. Select [Speakers], then press OK.
3. Select one of the following, then press OK:
[TV]: On by default.
Stream TV audio through the TV and
the connected HDMI-CEC audio
device until the connected device
switches to system audio control. TV
audio is then streamed through the
connected...](http://img.usermanuals.tech/thumb/59/54354/w64_philips_46pfl6606m-user-manual-34.png "Page 35
EN 35
English
Select speaker output with Adjust menu
If [EasyLink] or [EasyLink autostart] are
selected, access the adjust menu to switch
the TV audio. 1. While you watch TV, press ADJUST.
2. Select [Speakers], then press OK.
3. Select one of the following, then press OK:
[TV]: On by default.
Stream TV audio through the TV and
the connected HDMI-CEC audio
device until the connected device
switches to system audio control. TV
audio is then streamed through the
connected...")
![Page 36
EN 36
4 Set up your TV
Settings assistant
Use the settings assistant to guide you
through the picture and sound settings.
1. While you watch TV, press . 2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Start], then press OK.
4. Follow the onscreen instructions to
choose your preferred settings.
Picture and sound
More picture settings
1. Press . 2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust:
...](http://img.usermanuals.tech/thumb/59/54354/w64_philips_46pfl6606m-user-manual-35.png "Page 36
EN 36
4 Set up your TV
Settings assistant
Use the settings assistant to guide you
through the picture and sound settings.
1. While you watch TV, press . 2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Start], then press OK.
4. Follow the onscreen instructions to
choose your preferred settings.
Picture and sound
More picture settings
1. Press . 2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust:
...")
EN 31 English To switch Teletext 2.5 on or off 1. Press . 2. Select [Setup] > [TV settings] > [Preferences]. 3. Select [Text 2.5] > [On] or [Off], then press OK. Set locks and timers Clock You can display a clock on the TV screen. The clock displays the time that is broadcast by your TV service operator. Display the TV clock 1. While you watch TV, press OPTIONS. 2. Select [Status], then press OK. The clock is displayed on the lower right hand corner of the TV screen. Change the clock mode The clock mode is automatically synchronised to the Coordinated Universal Time (UTC). If your TV cannot receive UTC transmissions, change the clock mode to [Manual]. 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [Preferences]. 3. Select [Clock] > [Auto clock mode]. 4. Select [Automatic], [Manual] or [Country dependent], then press OK. Enable or disable daylight saving If clock mode is set to [Country dependent], you can enable or disable daylight saving for your time zone. 1. In the [Clock] menu, select [Daylight saving] > [Daylight saving time] or [Standard time], then press OK. Daylight saving is enabled or disabled. Set the clock manually If clock mode is set to [Manual], set the date and time manually. 1. In the [Clock] menu, select [Date] or [Time], then press OK. 2. Use the Navigation buttons to make your selection. 3. Select [Done], then press OK. Sleeptimer Sleeptimer switches the TV to standby after a specified time. You can switch off your TV earlier or reset the sleeptimer during the countdown. 1. Press . 2. Select [Setup] > [TV settings] > [Preferences] > [Sleeptimer]. 3. Press the Navigation buttons to set the sleeptimer. The sleeptimer can be set up to 180 minutes, in steps of five minutes. The sleeptimer is switched off if it is set to zero minutes. 4. Press OK to activate the sleep timer. The TV switches to standby after the specified time. Child lock To protect children from unsuitable TV programmes, you can lock the TV or block age rated programmes. Set or change the child lock code 1. Press . 2. Select [Setup] > [Channel settings] > [Child lock]. 3. Select [Set code], or [Change code]. 4. Enter the code with the Numeric buttons. Tip: If you forget your code, enter 8888 to override any existing codes. Lock or unlock channels 1. In the child lock menu, select [Channel lock]. 2. Enter the child lock code with the Numeric buttons. The [Channel lock] menu appears. 3. Select channels to lock or unlock.
EN 32 Parental rating Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with age ratings lower than your childs age. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings]. 3. Select [Child lock] > [Parental rating]. A message prompts you to enter the child lock code. 4. Enter the child lock code with the Numeric buttons. 5. Select an age rating, then press OK. All programmes above the selected age rating are blocked. For information on child lock codes, see Use more of your TV > Set locks and timers > Child lock (Page 31). View subtitles Analogue channels 1. Switch the TV to an analogue TV channel. 2. Press TEXT. 3. Enter the three-digit page number of the subtitles page (usually 888). 4. Press EXIT to exit teletext. Subtitles display if available. Digital channels 1. Press OPTIONS. 2. Select [Subtitles], then press OK. 3. Select [Subtitles off], [Subtitles on] or [On during mute], then press OK. Note: If MHEG application is activated, subtitles are not displayed. If you select [On during mute], subtitles are displayed only when you press to mute the sound. Subtitle language You can change the subtitle language on some digital channels. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings] > [Subtitle language]. 3. Select [Primary subtitles] or [Secondary subtitles] for the preferred language. 4. Press OK to confirm. Tip: You can also press OPTIONS > [Subtitle language]. View Scenea What you can do You can display a default picture as the wallpaper on your TV. You can also load another picture as the wallpaper. If the sleeptimer is off, the wallpaper is displayed for 240 minutes. Otherwise, it is displayed for the duration of the sleeptimer. What you need To use another picture as the wallpaper, you need a USB storage device that contains a picture that is less than 1 MB in size. Switch on 1. Press . 2. Select [Scenea], then press OK. The default picture is displayed. Note: The wallpaper is displayed for the duration of the sleeptimer. For more information on sleeptimer, see Use more of your TV > Set locks and timers > Sleeptimer (Page 31). Set TV wallpaper You can load another picture as the wallpaper. Note: Loading a new picture overrides the existing picture.
EN 33 English 1. Connect the USB storage device to the TV. 2. Press . 3. Select [Browse USB], then press OK. 4. Select a picture, then press OPTIONS. 5. Select [Set as Scenea], then press OK. 6. Select [Yes], then press OK. 7. Press any button to exit Scenea. Set Scenea lounge light When the TV is in standby, you can switch on Ambilight and create a lounge light effect with your wallpaper. Ambilight is available on certain models only. When the TV is in standby, press AMBILIGHT on the front of the TV. Note: It can take more than 5 seconds for the lounge light to switch on. To select another colour for the lounge light, see Use your TV > Ambilight > Setup. Use EasyLink What you can do Get the most out of your HDMI-CEC compliant devices with Philips EasyLink enhanced control features. If your HDMI- CEC compliant devices are connected through HDMI, you can control them at the same time with your TV remote control . Note: Other brands describe HDMI-CEC functionality differently. Some examples are Anynet (Samsung), Aquos Link (Sharp) or BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink. After you switch on Philips EasyLink, these features are available: One-touch play When you play an HDMI-CEC compliant device, the TV switches on from standby, and switches to the correct source. One-touch standby When you press on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode. System audio control If you connect an HDMI-CEC compliant device that includes speakers, you can choose to hear the TV from those speakers instead of the TV speakers. For more information about TV audio output, see Use more of your TV > Use EasyLink > Select speaker output (Page 34). EasyLink remote control You can control multiple HDMI-CEC compliant devices with your TV remote control. To switch on EasyLink Remote Control, see Use more of your TV > Use EasyLink > Control devices simultaneously (Page 34). Retain picture quality If your TV picture quality is affected by the picture-processing features of other devices, switch on Pixel Plus Link. To switch on Pixel Plus Link, see Use more of your TV > Use EasyLink > Retain picture quality (Page 35). Maximize display for subtitled video While you view subtitles in a video, you can maximize the video display area. Some subtitles can create a separate subtitle bar under the video, which limits the video display area. After you switch on auto subtitle shift, the subtitles display on top of the video image, which maximizes the video display area. To switch on auto subtitle shift, see Use more of your TV > Use EasyLink > Maximize display for video with subtitles (Page 35). Hear another device at standby You can hear a connected HDMI-CEC compliant device through the TV speakers, even when the TV is in standby. To switch on, see Use more of your TV > Use EasyLink > Hear another device at TV standby (Page 35). What you need To benefit from Philips EasyLink advanced control features, make sure that you do the following:
EN 34 Connect at least two HDMI-CEC compliant devices through HDMI Configure each HDMI-CEC compliant device properly Switch on EasyLink Switch on To switch on or off EasyLink Note: If you do not intend to use Philips Easylink, switch it off. 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink]. 3. Select [On] or [Off], then press OK. Control devices simultaneously If you connect multiple HDMI-CEC devices that support this setting, all the devices respond to the TV remote control. Caution: This is an advanced setting. Devices that do not support this setting will not respond to the TV remote control. 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink]. 3. Select [EasyLink Remote Control] > [On] or [Off]. 4. Press OK to activate. Notes: To switch back to TV control, press , then select [Watch TV]. To control another device, press , then select the device from the Home menu. To exit, press EXIT. EasyLink buttons Control HDMI-CEC compliant devices with the following buttons on the TV remote control. OK: Start, pause or resume play on the connected device, activate a selection, or access the device menu. (Previous) / (Next): Search backwards and forwards on the connected device. Numeric buttons: Select a title, chapter or track. Play buttons: Control video or music play. Standby: Display the menu of the connected device. : Display the TV menu. (Standby): Switch the TV and the connected device to standby. Other EasyLink buttons are available through the On-Screen Remote Control (OSRC). To access the OSRC 1. While you view content from a connected device, press OPTIONS. 2. Select [Show device keys], then press OK. 3. Select an onscreen button, then press OK. 4. Press EXIT to exit. Select speaker output If the connected device is HDMI Audio Return Channel (HDMI ARC) compliant, you can output TV audio through an HDMI cable. An additional audio cable is not required. Make sure you connect the device to the HDMI ARC connector on the TV. See Connect your TV > About cables > HDMI (Page 44). Configure TV speakers 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink] > [TV speakers]. 3. Select one of the following options, then press OK: [Off]: Switch off TV speakers. [On]: Switch on TV speakers. [EasyLink]: Stream TV audio through the connected HDMI-CEC device. Switch the TV audio to the connected HDMI-CEC audio device through the adjust menu. [EasyLink autostart]: Turn off TV speakers automatically and stream TV audio to the connected HDMI-CEC audio device.
EN 35 English Select speaker output with Adjust menu If [EasyLink] or [EasyLink autostart] are selected, access the adjust menu to switch the TV audio. 1. While you watch TV, press ADJUST. 2. Select [Speakers], then press OK. 3. Select one of the following, then press OK: [TV]: On by default. Stream TV audio through the TV and the connected HDMI-CEC audio device until the connected device switches to system audio control. TV audio is then streamed through the connected device. [Amplifier]: Stream audio through the connected HDMI-CEC device. If system audio mode is not enabled on the device, audio continues to stream from the TV speakers. If [EasyLink autostart] was enabled, the TV prompts the connected device to switch to system audio mode. Retain picture quality If your TV picture quality is affected by the picture-processing features of other devices, switch on Pixel Plus Link. To switch on Pixel Plus Link 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink]. 3. Select [Pixel Plus link] > [On], then press OK. Maximize video display Some subtitles can create a separate subtitle bar under the video, which limits the video display area. After you switch on auto subtitle shift, the subtitles display over the video image, which maximizes the video display area. Switch on auto subtitle shift 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink] > [Auto subtitle shift]. 3. Select [On], then press OK to activate. Note: Make sure that the picture format of the TV is set to [Auto format] or [Movie expand 16:9]. Hear another device at TV standby You can hear a connected HDMI-CEC compliant device through the TV speakers, even when the TV is in standby. 1. Press ADJUST to receive audio from the connected Philips EasyLink device. If available, audio only mode is enabled. 2. Accept the prompt on the TV to turn off the TV screen. 3. Control the audio playback with the TV remote control.
EN 36 4 Set up your TV Settings assistant Use the settings assistant to guide you through the picture and sound settings. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings], then press OK. 3. Select [Start], then press OK. 4. Follow the onscreen instructions to choose your preferred settings. Picture and sound More picture settings 1. Press . 2. Select [Setup] > [TV settings] > [Picture], then press OK. 3. Select a setting to adjust: [Smart picture]: Access predefined smart picture settings. [Reset]: Reset to default settings. [Contrast]: Adjust the intensity of the bright areas, keeping dark areas unchanged. [Brightness]: Adjust the intensity and details of the dark areas. [Colour]: Adjust colour saturation. [Hue]: Compensate colour variations in NTSC encoded transmissions. [Sharpness]: Adjust sharpness in the image. [Noise reduction]: Filter and reduce noise in the image. [Tint]: Adjust the colour balance in the image. [Custom tint]: Customise tint setting. [Pixel Plus HD] / [Pixel Precise HD]: Access advanced settings, including [HD Natural Motion], [Clear LCD]*, [Advanced sharpness], [Dynamic contrast], [Dynamic backlight], [MPEG artefact reduction], [Colour enhancement], [Gamma]. *Available on certain models only. [PC mode]: Allow picture settings to be changed when a PC is connected to the TV through HDMI. If enabled, you can select [Picture format] > [Unscaled] which provides maximum detail for display of PC content. [Light sensor]: Adjust settings dynamically to match lighting conditions. [Picture format]: Change the picture format. [Screen edges]: Change the picture size. [Picture shift]: Adjust the position of the picture. You cannot select this setting if the selected picture format is Auto zoom or Wide screen. More sound settings 1. Press . 2. Select [Setup] > [TV settings] > [Sound], then press OK. 3. Select a setting to adjust: [Smart sound]: Access predefined smart sound settings. [Reset]: Reset to factory default settings. [Bass]: Adjust the bass level. [Treble]: Adjust the treble level. [Surround]: Enable spatial sound. [Headphones volume]: Adjust headphone volume. [Auto volume leveling]: Automatically reduce sudden volume changes, for example when switching channels. [Balance]: Adjust the balance of the left and right speakers.
EN 37 English Audio settings Select audio language If the TV channel has multiple or dual sound broadcast, you can select the preferred audio language. While you watch TV, press OPTIONS. [Audio language]: Select the audio language for digital channels. [Dual I-II]: Select the audio language for analogue channels. Digital TV channels can stream several audio languages. If multiple languages are available, select the preferred language. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings] > [Language]. 3. Select one of the following settings, then press OK: [Primary audio] / [Secondary audio]: Select the available audio language. Set a secondary language in the same menu. If the primary language is unavailable, the TV receives this language. [Preferred audio format]: Select to receive standard audio format (MPEG) or advanced audio formats (AAC, EAC- 3 or AC-3 if available). [Mono/Stereo]: Select mono or stereo audio if stereo broadcasting is available. 4. Press EXIT to exit. Reset to factory settings You can restore default picture and sound settings, while the channel installation settings remain the same. While you watch TV, press . 2. Select [Setup] > [TV settings] > [Factory settings], then press OK. TV settings are reset to default. Channels Reorder and rename Reorder channels After the channels are installed, you can reorder the channel list to your preference. 1. While you watch TV, press FIND. The channel list is displayed. 2. Select the channel to reorder and press OPTIONS. 3. Select [Reorder], then press OK. 4. Press the Navigation buttons to move the highlighted channel to another location, then press OK. 5. Select one of the following options, then press OK. [Insert]: Insert the channel into the desired location. [Swap]: Swap location with another channel. 6. Once complete, press OPTIONS and select [Exit]. Rename channels After the channels are installed, you can rename them to your preference. 1. While you watch TV, press FIND. The channel list is displayed. 2. Select the channel to rename and press OPTIONS. 3. Select [Rename], then press OK. 4. In the entry screen, press the Navigation buttons or Numeric buttons to edit the name, then press OK. Tip: You can press OK in the entry screen to enable the Onscreen Keyboard. 5. Once complete, press the Navigation buttons to select [Done]. To clear the entry, select [Clear]. To cancel, select [Cancel]. 6. Press OK to confirm. 7. Press to exit.
EN 38 Update channel list When the TV was switched on for the first time, a full installation of channels was performed. You can automatically add or remove digital channels or manually update channels. Note: If you are prompted to enter a code, enter 8888. Automatic update To automatically add or remove digital channels, leave the TV in standby mode. The TV updates channels and stores new channels everyday. Empty channels are removed from the channel list. If a channel update is performed, a message appears at startup. If you do not want this message to appear 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings]. 3. Select [Channel installation] > [Channel update message]. 4. Select [Off], then press OK. To disable automatic updates In the [Channel installation] menu, select [Automatic channel update] > [Off]. To manually update channels 1. Press . 2. Select [Setup] > [Search for channels] > [Update channels], then press OK. 3. Follow the onscreen instructions to update the channels. Automatic install When the TV was switched on for the first time, a full installation of channels was performed. You can run this full installation again to set your language, country and install all available TV channels. Select network To install cable or antenna channels, you need to switch to the respective network. 1. While you watch TV, press . 2. Select [Setup] > [Channel settings]. 3. Select [Channel installation] > [Antenna or Cable DVB]. 4. Select one of the following settings: [Antenna (DVB-T)]: Access free-to-air antenna or digital DVB-T channels. [Cable]: Access cable or digital DVB-C channels. 5. Press OK to confirm. 6. Press EXIT to exit. Start installation 1. Press . 2. Select [Setup] > [Search for channels] > [Reinstall channels], then press OK. 3. Follow the onscreen instructions to complete the channel installation. 4. Once complete, select [Finish], then press OK. Tip: Press FIND to see the channel list. Notes: During installation, leave settings unchanged unless your digital provider gives you the specific values to enter. When digital TV channels are found, the list of installed channels may display empty channel numbers. You can rename, reorder or uninstall these channels. Install analogue channels You can search and store analogue TV channels manually. Step 1: Select your system Note: Skip this step if your system settings are correct. 1. While you watch TV, press . 2. Select [Setup] > [Channel settings] > [Channel installation]. 3. Select [Analogue: Manual installation] > [System], then press OK. 4. Select the system for your country or region, then press OK. Step 2: Search and store new TV channels 1. In the [Analogue: Manual installation] menu, select [Find channel], then press OK. 2. Select one of the following options: Press the Navigation buttons or Numeric buttons to manually enter the channel frequency.
EN 39 English Select [Search] then press OK to search for the next channel automatically. 3. When the correct channel frequency is entered, select [Done], then press OK. 4. Select [Store as new channel], then press OK to store the new TV channel. Install digital and satellite channels Install digital channels To improve TV reception, reposition the antenna. You need to know the correct frequency to tune. For best results, contact the service provider or get a professional installer. 1. Press . 2. Select [Setup] > [Channel settings] > [Channel installation]. 3. Select [Digital: Reception test] > [Search], then press OK. 4. Press the Numeric buttons to enter the channel frequency. 5. Select [Search], then press OK. 6. When the correct channel is located, select [Store], then press OK. 7. Press EXIT to exit. Notes If the reception is poor, reposition your antenna and repeat the procedure. If you receive the channel with DVB-C, select [Automatic] in [Symbol rate mode] unless your cable provider supplies you with a specific symbol rate value. Install satellite channels Note: Available on certain models only. [Search for satellite] is only available if the TV supports DVB-S. If your satellite receiver is connected to the SAT connector, you can receive satellite channels. 1. While you watch TV, press . 2. Select [Setup] > [Search for satellite] > [Reinstall channels]. 3. Follow the onscreen instructions to complete the installation. 4. Once complete, select [Finish], and then press OK. View satellite channels To watch satellite channels, press > [Watch satellite]. Fine-tune channels If the reception of an analogue TV channel is poor, fine-tune the TV channel. 1. Press . 2. Select [Setup] > [Channel settings] > [Channel installation]. 3. Select [Analogue: Manual installation] > [Fine tune], and then press OK. 4. Press or to fine-tune the channel. 5. When you have selected the correct channel frequency, select [Done], and then press OK. 6. Select one of the following options, then press OK. [Store current channel]: Store the channel as the current channel number. [Store as new channel]: Store the channel as a new channel number. Reinstall channels ATTENTION: This feature is intended for dealers and service personnel. You can copy channel lists from one Philips TV to another through a USB storage device. You do not need to search for channels or install them again on the second TV. The channel list file is small enough to fit on any USB storage device. What you need The two Philips TVs must have: the same country setting, the same year range, the same DVB type, as indicated by the suffix (H, K, T, or D/00) in the model name, the same settings for satellite channels, including the number of LNB satellites
EN 40 the same hardware type, as indicated by the sticker on the back of the TV, (for example Qxxx.xx.Lx), and compatible software versions. An onscreen message will notify you if the channel list cannot be copied to the second TV. Note: If you are prompted to enter a code, enter 8888. Copy channel list to USB 1. Connect a USB storage device to the TV with the channels installed on it. 2. Press . 3. Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to USB], then press OK. The channel list is copied to the USB storage device. 4. Unplug the USB storage device. Copy channel list to TV with no channels installed 1. Switch on the TV with no channels installed on it to start the initial installation. Select the language and country. The country setting must be the same as that of the TV whose channel list you want to copy. Skip the search for channels. 2. Connect the USB storage device containing the channel list to the TV. 3. Press . 4. Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to TV], then press OK.The channel list is copied to the TV. 5. Unplug the USB storage device. Copy channel list to TV with channels installed 1. Switch on the TV on which you want to copy the channel list. 2. Press . 3. Select [Setup] > [Search for channels] > [Reinstall channels], then press OK. You will be prompted to select the country where the TV was installed. Make a note of the current setting and press followed by [Cancel] to exit. 4. If the country setting on the TV is different from that of the TV whose channel list you want to copy, reinstall the TV and select the country setting to match the first TV. See Set up your TV > Reinstall the TV (Page 43). 5. Connect the USB storage device containing the channel list to the TV where you want to copy the channel list. 6. Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to TV], then press OK. The channel list is copied to the TV storage device. 7. Unplug the USB storage device. Menu language 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [Preferences] > [Menu language]. 3. Select a menu language from the list, then press OK. Set universal access Switch on Some digital TV broadcasters provide special audio and subtitle features for people who are hearing or visually impaired. To enable these features, turn on universal access in the preference menu. 1. Press . 2. Select [Setup] > [TV settings] > [Preferences]. 3. Select [Universal access] > [On], then press OK. Hearing impaired Tip: To verify whether a hearing impaired audio language is available, press OPTIONS and select [Audio language]. Languages with an ear icon support hearing impaired audio.