Philips 46pfl6606m User Manual

     
EN      41   
English
 
To switch on hearing impaired audio and 
subtitles 
1. While you watch TV, press  OPTIONS. 
2. Press one of the following buttons to 
select an option: 
 Red: Switch hearing impaired on or off. 
 Green: Switch on hearing impaired 
audio and subtitles. 
3. Press EXIT to exit. 
Visually impaired 
Tip: To verify whether visually impaired 
audio is available, press  OPTIONS and 
select [Audio language]. Languages with an 
eye icon support visually impaired audio. 
To switch on...

  
EN      42       
For more information, see the following 
pages.   
Update with USB 
Before performing this procedure, make sure 
that you have the following: 
 Spare time to complete the entire 
update. 
 A USB flash drive that has at least 
256MB of storage space, is FAT or 
DOS formatted, and has its write 
protection disabled. 
 Access to a computer with a USB port 
and internet access. 
Note: Do not use a USB hard drive. 
1. Press . 2. Select [Setup] > [Update software], then 
press OK....

     
EN      43   
English
 
Update [Help] 
 Do not switch off the TV or remove 
the USB storage device during the 
update. 
 If a power failure occurs during the 
update, do not remove the USB 
storage device from the TV. The TV 
continues to update as soon as power 
is restored. 
 If an error occurs during the update, 
retry the procedure. If the error 
reoccurs, contact Philips Consumer 
Care.   
1. Switch on the TV. 
2. Disconnect all other USB devices from the 
TV. 
3. Connect the USB storage...

  
EN      44       
5 Connect your 
TV 
About cables 
Cable quality  
Overview 
Before you connect devices to the TV, check 
the available connectors on the device. 
Connect the device to the TV with the 
highest quality connection available. Good 
quality cables ensure a good transfer of 
picture and sound. 
The connections shown in this user manual 
are recommendations only. Other solutions 
are possible. Tip: If your device only has composite or 
RCA connectors, use a SCART-cinch 
adapter to connect...

     
EN      45   
English
 SCART 
A SCART cable combines video and audio 
signals. 
SCART connectors can handle RGB video 
signals but cannot handle high-definition 
(HD) TV signals. 
  
VGA 
Use this connection to display PC content 
on the TV. 
For video and sound, use the VGA and 
AUDIO IN connectors. 
  
Connect devices 
Overview 
You can connect your devices to the TV with any of the following options. After connection, press  > [Add your devices]. 
  
    

  
EN      46       
Blu-ray or DVD disc player 
Connect the disc player with an HDMI cable to the TV.  
   
Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV.  
  
TV receiver 
Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on 
certain models only.) 
 
    

     
EN      47   
English
 
  
Connect the satellite or digital TV receiver with an HDMI cable to the TV. 
   
Connect the satellite or digital TV receiver with a SCART cable to the TV. 
   
Connect the satellite or digital TV receiver with a component cable (Y Pb Pr) and an audio L/R 
cable to the TV. 
  
    

  
EN      48       
Recorder 
Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.) 
   
Connect the recorder with a SCART cable to the TV. 
   
Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. 
  
Game console 
The most practical connectors for a game 
console are on the side of the TV. However, 
you can also use the connectors at the back 
of the TV. 
For the best gaming experience, set the TV 
to game mode. 
1. Press...

     
EN      49   
English
 Connect the game console with an HDMI cable to the TV. 
   
Connect the game console with a component cable (Y Pb Pr) and an audio L/R cable to the TV. 
  
Home theatre system 
Connect the home theatre with an HDMI cable and an audio cable to the TV. 
 
    

  
EN      50       
  
Connect the home theatre with a SCART cable to the TV. 
   
Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV. 
  
Digital camera 
Connect the digital camera with a USB cable to the TV.