Philips 42pfl9664 User Manual

In the Browse for Folderwindow select a folder with
music, photos or videos you want to share. Click OK.
Now everything is set to enjoy music, photos and
videos on your TV.
Twonky Media v4.4.2 on Macintosh OS XSet for network sharing
In Twonky Mediaclick Basic Setup > First steps.
In this window you can change the server name that
appears on your TV.
Click Basic Setup > Clients/Security.
Check the box next to Enable sharing for new clients
automatically.
2
1
1
 

Set folders for sharing
Click on Basic Setup > Sharing.
Some ‘Content Locations’ might be set already
automatically. To add a folder (a content location) to
be shared on the network click the Browsebutton.
In the blue frame click the hard disk name to browse
to a folder with music, photos or videos you want to
share with other devices (your TV).Click Selectto select the folder for sharing. 
Now click Save Changes.
Then click Rescan content directories.
In some cases this might not make all files and...

4.4.1   Pixel Plus linkSome other devices, DVD or Blu-ray Disc players, might
have their own picture quality processing. To avoid bad
picture quality from interference with the TV processing,
the picture processing of these devices should be
discarded. With Pixel Plus link you can discard this picture
quality processing.
Close this user manual and press h and select Setup >
Installation > Preferences > Pixel Plus link. Select On to
discard the picture processing from connected devices.
 

4.4.2   Audio syncWhen a Home Theatre System is connected, the picture
on your TV and the sound from the Home Theatre System
should be syncronized. A mismatch is visible in scenes
with people talking. When they finish sentences before
their lips stop moving, you need to adjust the Audio sync
delay on the Home Theatre System.
Consult the user manual of the Home Theatre System.
In case you cannot set this delay in the Home Theatre
System or the maximum setting is insufficient, you can
consider to switch...

4.5.1   From the InternetIn some cases, it might be necessary to update the TV
software. If your TV is connected to a router, which is
connected to the Internet, you can update the TV software
directly from the Internet. You need a high speed Internet
connection.
Close this user manual, press h > Setup > Software
update > Update now and press OK.
Select Internet and press OK.
Follow the instructions on screen.
When the update is done, the TV switches off and back on
again automatically. Wait for the TV...

4.5.2      With  a  USB  memory  device1/3In some cases, it might be necessary to update the TV
software. Start the software update on the TV. Then,
download the TV software from the Internet onto your PC.
Use a USB memory device to upload the software from
your PC to the TV.
Preparation
You need a PC with a high speed Internet connection. You
will need a USB memory device with 256 Mb free space
and make sure that the write protection is switched off.
Some USB memory devices might not work with the TV....

4.5.2      With  a  USB  memory  device2/31 Identification
Close this user manual, press h > Setup > Software
update > Update now and press OK.
Select USB and press OK.
Follow the onscreen instructions.
The TV will ask to insert the USB device into the USB
connector at the side of the TV.
2 Download from PC to USB
Once the TV identification file is written to the USB device,
insert the USB into your PC that is connected to the
Internet. On the USB device, locate the file 'update.htm'
and...

4.5.2      With  a  USB  memory  device3/33 Download from USB to TV
Insert the USB memory device back into the TV. Follow the
onscreen instructions to start the new TV software update.
The TV switches off for 10 seconds and back on again.
Please wait.
Do not …
• use the remote control
• remove the USB device from the TV during the software
update
If a power cut occurs during the update, never remove the
USB memory device from the TV. When the power returns,
the update continues.
At the end of the update,...

5.1.1   Power cableMake sure the power cable is securely inserted in the
TV. Make sure that the power plug in the wall socket is
accessible at all times.
When disconnecting the power cable, always pull the plug,
never the cable.
Although this TV has a very low standby power
consumption, unplug the power cable to save energy if
you do not use the TV for a long time.
 

5.1.2   Antenna cableLocate the antenna connection at the back of the TV. Insert
the antenna cable securely in the Antenna a socket.