Philips 42pfl9664 User Manual

4.1.3      Sound2/3• Volume — visually impaired
Changes the volume of the selected visually impaired
audio language. (Only for UK.)
• Audio language
Shows the list of broadcast audio languages of digital TV
channels.
You can set your preferred audio language in h > Setup >
Installation > Languages > Primary audio.
• Dual I/II
If broadcast is available, you can choose between two
different languages.
• Mono/stereo
If stereo broadcasting is available, you can select Mono or
Stereo for each TV channel.
• TV...

4.1.3      Sound3/3• Surround
Switches the TV automatically to the best surround sound
mode dependant on the broadcast. Select On or Off.
• Headphones volume
Changes the volume of the headphones.
You can mute the TV speakers with m.
• Delta volume
Levels out volume differences between channels
or connected devices. First, switch to the channel or
device whose volume difference you want to level out.
• Balance
Sets the balance of the left and right loudspeakers to best
fit your listening position.
• Auto...

4.1.4   AmbilightIn the Ambilight menu, you can adjust all Ambilight
settings individually.
Close the user manual and press h > Setup > Ambilight.
Use w or x, u or v to select and adjust a setting.
Press OK to activate a setting.
For more on Ambilight, read Use your TV > Use Ambilight.
 

4.1.5   Factory settingsYou can return to the original factory settings.
Only picture, sound and Ambilight settings will be reset.
Close the user manual and press h > Setup > Installation
> Factory reset and press OK.
 

4.2.1      Reorder  and  rename1/2After the first installation, you might want to reorder or
rename installed channels. Organise TV channels in the
Channel overview according to your own preference or
give them a recognisable name.
While watching TV, press OK to open the Channel overview.
The Channel overview shows the TV channels and radio
stations installed on your TV.
To reorder or rename, press Options o and select the
option you need.
Reorder
You can reposition channels within the overview.
1 Select...

4.2.1      Reorder  and  rename2/23 Reposition the channel where you want it with the
navigation keys.
4 Press OK to confirm the position.
You can highlight another channel and do the same.
To stop Reorder, press Options o and select Exit reorder.
Rename
You can rename a channel.
1 In the channel overview, navigate to the channel you
want to rename.
2 Select Rename in the Options o menu.
3 Use the navigation keys to position the highlight. Press
Back b to delete a character. Use the remote control
number...

4.2.2      Update  channels1/2When the TV was switched on for the first time, a full
installation of channels was performed.
You can set the TV to add or remove digital channels
automatically. You can also manually start the channel
update.
Automatic update
To set the TV to update digital TV channels automatically,
leave the TV in standby mode. Once a day, at 6 AM, the TV
updates earlier found channels and stores new channels.
Empty channels are removed from the Channel overview.
If a channel update has...

4.2.2      Update  channels2/2Manual update
To update channels yourself at any time, press h > Setup
> Installation > Channel installation > Automatic installation
and press OK.
Start the update and select Update Channels.
The update may take a few minutes.
 

4.2.3   Reinstall channelsWhen the TV was switched on for the first time, a full
installation of channels was performed.
You can redo this full installation all over again to set your
language, country and install all available TV channels.
Full installation
To reinstall the TV, press h > Setup > Installation >
Channel installation > Automatic installation and press OK.
Start the installation and select Reinstall channels.
The update may take a few minutes.
To reorder or rename found channels, read Setup...

4.2.4      Digital  reception  quality1/2If you receive digital TV broadcasting (DVB) from your
own antenna (DVB-T) or use the TV tuner to receive digital
cable channels (DVB-C), you can verify the quality and
signal strength of a channel.
If the reception is poor, you can reposition your antenna
to try to improve the reception. For best results, contact a
specialised antenna installer.
To verify the reception quality of such a digital channel,
select the channel, press h > Setup > Installation >
Channel...