Philips 42pfl9664 User Manual

5.4.2   HD Game consoleUse an HDMI cable or YPbPr and Audio L/R cables to
connect a High Definition game console to the TV.
Read also Connections > More devices > Game.
 

5.4.3   Photo cameraTo view pictures stored on your digital photo camera, you
can connect the camera directly to the TV. Use the USB
connection at the side of the TV to connect. Switch on the
camera after you made the connection.
If the list with the content of the camera does not show
automatically, your camera might need to be set to
transfer its content with PTP – Picture Transfer Protocol.
Read the user manual of the digital photo camera.
 

5.4.4      Camcorder1/3The most practical connection for a camcorder is at the
side of the TV. You can use an HDMI, S-Video or Video
connection but never connect the S-Video and Video at
the same time.
See the next pages for how to connect your camcorder.
...
 

5.4.4      Camcorder2/3Use an HDMI cable to connect the camcorder to the back of the TV.
 

5.4.4      Camcorder3/3Or use a S-video or video cable together with an Audio L/R to connect the camcorder to the back of the TV.
 

5.4.5      TV  as  PC  monitor1/3You can connect the TV to your computer as a PC monitor.
Before connecting the PC, set the PC monitor refresh rate
to 60 Hz.
You can connect the PC to the side of the TV or
alternatively to the back. See the next pages to connect
your computer.
Ideal TV setting
Set the TV Picture format to Unscaled for the sharpest
picture quality. While watching TV, press Options o,
select Picture format and select Unscaled.
Supported PC resolutions
For a list of supported resolutions...

5.4.5      TV  as  PC  monitor2/3Use a DVI to HDMI adapter to connect the PC to HDMI and an audio L/R cable to connect the Audio L/R to the back of the TV.
 

5.4.5      TV  as  PC  monitor3/3Use a VGA cable to connect the PC to the VGA connector and an audio L/R cable to connect the VGA Audio L/R to the back of the
TV.
 

5.4.6   DecoderUse a scart cable to connect a decoder which decodes
analogue antenna channels. Use the EXT1 or EXT2
connectors at the back of the TV.
You have to assign the TV channel as a channel to be
decoded. Then assign the connection where the decoder is
connected.
Close this user manual and press h > Setup > Installation
> Decoder. Select Channel to set the channel that you want
to decode. Select Status to set the connector you use for
the decoder.
 

5.5.1      EasyLink1/2If a device is equipped with the HDMI-CEC standard, the
device and the TV can work together.
Connect the TV to the device using an HDMI cable. The
TV comes with EasyLink set to On. To switch EasyLink off,
press h > Setup > Installation > Preferences > EasyLink.
With EasyLink, the following functions are available:
• One touch play
Insert a disc and press Play on the device. The TV switches
on from standby mode and shows the disc programme
automatically.
• System standby
Press O on...