Home > Philips > Television > Philips 42pfl8404 User Manual

Philips 42pfl8404 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Philips 42pfl8404 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							1.1.7      ECO  -  Green
    4/4
    Thanks to our environmental effort, this TV has
    been awarded the European Ecolabel —the flower-
    (www.ecolabel.eu).
    You can find detailed information on standby energy
    consumption, warranty policy, spare parts and recycling
    of this TV on the Philips website for your country at
    www.philips.com End of use
    To inform yourself on the correct disposal of the TV and
    batteries, read chapter Getting started > Important > End of
    use. 
    						
    							1.2.1      Switch  on
    1/2
    It takes a couple of seconds for the TV to start up.
    If the red standby indicator is off, press O at the right of
    the TV to switch it on.
    Press O again to switch off.
    ... 
    						
    							1.2.1      Switch  on
    2/2
    The white LED flashes during start-up and switches off
    completely when the TV is ready for use. The Ambilight
    shows the TV is on.
    You can set the white LED on permanently or set its
    brightness. Press h> Setup > Installation > Preferences >
    LightGuide brightness. 
    						
    							1.2.2   Volume
     V
    The keys on the side of the TV allow basic TV control.
    You can adjust the volume with Volume + / - on the side of
    the TV. 
    						
    							1.2.3   Programme P
    The keys on the side of the TV allow basic TV control.
    You can switch TV channels with Program + / - on the side
    of the TV. 
    						
    							1.2.4   Source key
    The keys on the side of the TV allow basic TV control.
    To open the Source list to select a connected device, press
    Source s. Press Source s again to select a connected
    device in the list. After a few seconds the TV switched to
    the selected device. 
    						
    							1.2.5   IR sensor
    Always take care to point the remote control at the remote
    control infra red sensor on the front of the TV. 
    						
    							1.3.1   VESA info
    Your TV is prepared for VESA compliant wall mounting. A
    VESA wall mount bracket is not included.
    Use the following VESA code to purchase the bracket.
    32” / 80cm VESA MIS-F 200, 200, 6
    37” / 94cm VESA MIS-F 200, 200, 6
    42” / 107cm VESA MIS-F 400, 400, 6
    47” / 119cm VESA MIS-F 400, 400, 8
    When mounting the TV on a wall, always use all 4 fixing
    points on the back of the TV. Use a screw length as shown
    in the drawing. 
    						
    							1.3.2   Unmount the stand
    Before you lift the TV from the stand, unscrew the 4 stand screws on the back of the TV. 
    						
    							1.4.1   Full High Definition LCD display
    This TV is equipped with a full High Definition (HD) display.
    A full HD 1920x1080p, the highest resolution of HD sources.
    This display offers a brilliant flicker free progressive scan
    picture with optimum brightness and superb colours.
    To enjoy HD TV you need to get programmes in HD first. If
    you are not watching HD programmes, the picture quality
    will be that of a normal TV.
    Read Get started > Important > Enjoy HD TV 
    						
    All Philips manuals Comments (0)

    Related Manuals for Philips 42pfl8404 User Manual