Philips 42pfl8404 User Manual
Have a look at the manual Philips 42pfl8404 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4.1.3 Sound 1/3 In the Sound menu, you can adjust all sound settings individually. Close the user manual and press h > Setup > Sound. Use w or x, u or v to select and adjust a setting. Press OK to activate a setting. • Bass Changes the low tones of the sound. Select each bar to change the setting. • Treble Changes the high tones of the sound. Use each slider bar to change the setting. • Volume Changes the volume. If you do not want the volume bar to appear, press h > Setup > Installation > Preferences > Volume bar. Select Off and press OK. ...
4.1.3 Sound 2/3 • Volume — visually impaired Changes the volume of the selected visually impaired audio language. (Only for UK.) • Audio language Shows the list of broadcast audio languages of digital TV channels. You can set your preferred audio language in h > Setup > Installation > Languages > Primary audio. • Dual I/II If broadcast is available, you can choose between two different languages. • Mono/stereo If stereo broadcasting is available, you can select Mono or Stereo for each TV channel. • TV speakers If you have an audio system connected to your TV, you can switch off the TV speakers. If your audio system supports EasyLink, read Connections > EasyLink. Select Automatic (EasyLink) to have the sound from your TV automatically reproduced by your audio system. ...
4.1.3 Sound 3/3 • Surround Switches the TV automatically to the best surround sound mode dependant on the broadcast. Select On or Off. • Headphones volume Changes the volume of the headphones. You can mute the TV speakers with m. • Delta volume Levels out volume differences between channels or connected devices. First, switch to the channel or device whose volume difference you want to level out. • Balance Sets the balance of the left and right loudspeakers to best fit your listening position. • Auto volume levelling Reduces sudden volume differences like at the beginning of commercials or when switching from one channel to another. Select On or Off.
4.1.4 Ambilight In the Ambilight menu, you can adjust all Ambilight settings individually. Close the user manual and press h > Setup > Ambilight. Use w or x, u or v to select and adjust a setting. Press OK to activate a setting. For more on Ambilight, read Use your TV > Use Ambilight.
4.1.5 Factory settings You can return to the original factory settings. Only picture, sound and Ambilight settings will be reset. Close the user manual and press h > Setup > Installation > Factory reset and press OK.
4.2.1 Reorder and rename 1/2 After the first installation, you might want to reorder or rename installed channels. Organise TV channels in the Channel overview according to your own preference or give them a recognisable name. While watching TV, press OK to open the Channel overview. The Channel overview shows the TV channels and radio stations installed on your TV. To reorder or rename, press Options o and select the option you need. Reorder You can reposition channels within the overview. 1 Select Reorder in the Options o menu to start reordering channels. 2 Highlight a channel and press OK. ...
4.2.1 Reorder and rename 2/2 3 Reposition the channel where you want it with the navigation keys. 4 Press OK to confirm the position. You can highlight another channel and do the same. To stop Reorder, press Options o and select Exit reorder. Rename You can rename a channel. 1 In the channel overview, navigate to the channel you want to rename. 2 Select Rename in the Options o menu. 3 Use the navigation keys to position the highlight. Press Back b to delete a character. Use the remote control number pad as you do for SMS/text messaging to select a character. Use the 0 number key to select a special character. Select Clear to clear all text. 4 Select Done and press OK to end Rename.
4.2.2 Update channels 1/2 When the TV was switched on for the first time, a full installation of channels was performed. You can set the TV to add or remove digital channels automatically. You can also manually start the channel update. Automatic update To set the TV to update digital TV channels automatically, leave the TV in standby mode. Once a day, at 6 AM, the TV updates earlier found channels and stores new channels. Empty channels are removed from the Channel overview. If a channel update has been performed, a message shows at TV start up. If you do not want this message to appear, select No in h > Setup > Installation > Channel installation > Channel update message. ...
4.2.2 Update channels 2/2 Manual update To update channels yourself at any time, press h > Setup > Installation > Channel installation > Automatic installation and press OK. Start the update and select Update Channels. The update may take a few minutes.
4.2.3 Reinstall channels When the TV was switched on for the first time, a full installation of channels was performed. You can redo this full installation all over again to set your language, country and install all available TV channels. Full installation To reinstall the TV, press h > Setup > Installation > Channel installation > Automatic installation and press OK. Start the installation and select Reinstall channels. The update may take a few minutes. To reorder or rename found channels, read Setup > Channels > Reorder and rename.