Philips 42pfl8404 User Manual
Have a look at the manual Philips 42pfl8404 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
6.4 Picture 3/3 The picture position on screen is not correct • Some picture signals from some devices do not fit the screen properly. You can move the picture with the cursor keys on the remote control. Check the signal output of the device.
6.5 Sound There is a picture but no sound • Verify the volume is not set to 0. • Verify the sound has not been muted with m. • Verify that all cables are connected properly. • If no sound signal is detected, the TV automatically switches off the sound. This is proper operation and is not a malfunction. The sound is poor • Verify that the sound is set to Stereo. • Select any of the Smart settings in h > Setup > Smart settings. The sound comes from one speaker only • Verify that the Balance is not set to extreme left or right. Sound delay when a DVD Home Theatre System device is connected • Read the user manual of the DVD device to adjust the audio sync delay. If you cannot set a delay, switch off HD Natural Motion in h > Setup > Picture > Perfect Pixel HD.
6.6 Devices 1/2 HDMI connections • The HDMI-HDCP procedure might take a few seconds before the TV shows the picture from a device. • If the TV does not recognise the device and the screen shows no picture, try switching from one device to another and back again to restart the HDCP procedure. • If sound interruptions occur persistently, see the user manual of the device to verify the output settings. If that does not help, connect an additional audio cable. • If a DVI to HDMI adaptor is used, verify that an additional audio connection is in place to complete the DVI connection. HDMI with EasyLink • Verify if the connected device supports the HDMI-CEC standard and is properly set up. Read the user manual that comes with the device. • Verify if the HDMI cable is properly connected. • Verify if EasyLink is activated in h >Setup > Installation > Preferences > EasyLink.
6.6 Devices 2/2 • Make sure that the System audio control in your HDMI- CEC audio devices is properly set up. Read the user manual that comes with your audio device. EasyLink Remote control • Some devices have identical functionality but do not support the specific remote control commands. Read Connections > EasyLink HDMI-CEC > EasyLink RC. The PC display on my TV is not stable or is not synchronised (with TV as PC monitor) • Set the refresh rate of your PC to 60Hz. • Verify that the correct resolution mode is selected on your PC. Read Technical data > Display resolutions.
6.7 Multimedia USB device content is not shown • Set your device (camera) to ‘Mass Storage Class’ compliant. • The USB device may need specific driver software. Unfortunately, this software cannot be downloaded to your TV. • Not all audio and picture files are supported. Read Technical data. USB device content does not play back smoothly • The transfer performance of the USB device limits the transfer rate. PC files are not shown in the Browse PC network menu • Verify that files have been added in the PC folder. • Not all file formats are supported. Read Technical data > Multimedia formats. • You have to set the PC media server to share files with the TV. Read Setup > Network > What you need. PC files do not play • Read Technical data > Multimedia formats.
6.8 Network Home network not found • Verify if the router is switched on and set to DHCP On. • Verify if the firewalls in your network allow the TV to access the network. • Your home network might require specific network settings. If you are unsure, ask someone with knowledge of network settings to help you. To set specific network settings, press h > Setup > Installation > Network > Network mode and/or ... > IP Configuration. Net TV does not work • If the conenction to the router is ok, verify the router connection to the internet. Net TV works slow • You need a high speed internet connection for your router.
7.1 Power and reception Product specifications are subject to change without notice. For more specification details of this product see www.philips.com/support. Power • Mains power : AC220-240V +/-10% • Ambient temperature : 5°C to 35°C • Power and standby power consumption, see the technical specification on www.philips.com Reception • Antenna input : 75ohm coaxial (IEC75) • TV system : DVB COFDM 2K/8K, • Video playback : NTSC, SECAM, PAL • DVB : DVB-T, DVB-C, MHEG 4 (see selected countries on the TV typeplate) • Tunerbands : VHF, UHF, S-Channel, Hyperband
7.2 Display and sound Picture / Display • Display type: LCD Full HD W-UXGA • Diagonal size : - 32 inch / 80cm - 37 inch / 94cm - 42 inch / 106cm - 47 inch / 119cm • Aspect ratio : Widescreen 16:9 • Panel resolution: 1920x1080p • Pixel Precise HD picture enhancement • 1080p 24/25/30/50/60Hz processing • 100 Hz LCD4 Sound • Output power (RMS) : 2 x 10 W • Incredible Surround • Nicam Stereo
7.3 Supported display resolutions Video formats Resolution — Refresh rate • 480i - 60 Hz • 480p - 60 Hz • 576i - 50 Hz • 576p - 50 Hz • 720p - 50 Hz, 60 Hz • 1080i - 50 Hz, 60 Hz • 1080p - 24 Hz, 25 Hz, 30 Hz • 1080p - 50 Hz, 60 Hz Computer formats Resolution — Refresh rate • 640 x 480 — 60 Hz • 600 x 800 — 60 Hz • 1024 x 768 — 60 Hz • 1280 x 768 — 60 Hz • 1360 x 765 — 60 Hz • 1360 x 768 — 60 Hz • 1280 x 1024 — 60 Hz • 1920 x 1080 — 60 Hz • 1920 x 1080 — 60 Hz
7.4 Multimedia 1/2 Connections • USB • Ethernet UTP5 Supported USB / memory device formats • FAT 16, FAT 32, NTFS Playback formats • MP3 • Still pictures : JPEG • MPEG 1, MPEG 2, MPEG 4 • MPEG program stream PAL • AVI • H.264 (MPEG-4 AVC) • WMA v2 up to v9.2 • WMV9 ...