Philips 32pfl5404 User Manual

							29
   
 
b   
Stereo audio output to headphones or 
earphones.
c  AUDIO L/R 
Audio input from analogue devices 
connected to  VIDEO.
 
 
 
d  VIDEO 
Composite video input from analogue 
devices such as VCRs.
   
 
e  S-VIDEO 
S-Video (side) to be used with Audio L /R 
connectors for camcorder, game console, 
etc. When you use the S-Video (side) for 
video signals, do not use the Composite 
video (side) input for video signals.
   
 
g  SERV. U 
For use by ser vice personnel only.
   
 
 
 
Side connectors
 
 
 
a  USB 
Data input from USB storage devices.
1
2
6
3
4
5
English
EN
 
						

							30
•DVI - HDMI cable
 
 
 
•HDMI cable and HDMI-DVI adaptor
 
 
 
•VGA cable
 
 
 
 
 
DVI
LEFT / RIGHT
HDMI 1/ DVIAUDIO IN :
PC IN(AUDIO)For TV of size 26 inch and largerFor TV of size 22 inch and smaller
HDMI 2/ DVI
/ HDMI 2
VGA
DVI
/ HDMI 2
LEFT / RIGHT
HDMI 1/ DVIAUDIO IN : PC IN(AUDIO)For TV of size 26 inch and larger
HDMI 2/ DVI
VGA
For TV of size 22 inch and smaller
VGA
VGA
 LEFT / RIGHT
HDMI 1/ DVIAUDIO IN : PC IN(AUDIO)For TV of size 26 inch and larger
HDMI 2/ DVI
VGA
For TV of size 22 inch and smaller
   
 
f  HDMI 
Digital audio and video input from high-
defi nition digital devices such as Blu-ray 
players.
   
  
 
 
 
 
 
Connect a computer
Before you connect a computer to the TV
Set the screen refresh rate on your  •
computer to 60Hz.
Select a suppor ted screen resolution on  •
your computer.
Connect a computer with one of the 
following connectors:
  Note
Connections via DVI or VGA require an •
additional audio cable.
•HDMI cable
 
 
 
EN
 
						

							31
   
 
 
 
 
 
Enable or disable EasyLink
 
Note
Do not enable Philips EasyLink if you do not •
intend to use it.
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Installation] >[Preferences] >[EasyLink].
 
 
 
 
3 Select  [On] or  [Of f ].
 
 
 
 
 
 
 
Use one-touch play
 
 
 
 
1  Af ter enabling EasyLink, press play on 
your device. 
The TV automatically switches to the  »
correct source.
   
 
 
 
 
 
 
 
Use one-touch standby
 
 
 
 
1  Press and hold  Standby on the T V ’s or 
device’s remote control for at least three 
seconds. 
The TV and all connected HDMI  »
devices switch to standby.
   
 
 
 
 
 
 
 
System audio control
When enabled, this feature automatically 
turns off T V speakers when content from 
an EasyLink-compliant home theatre system 
is played. Audio is played only from the 
amplifi er’s speakers such as home theatre 
system’s speakers or AV receiver.
  Note
Follow the instructions in the user manual •
of the connected devices to map the audio 
input to your T V  correctly  (see ‘Connect an 
amplifi er’ on page  32 ).
 
 
 
 
1  Enable one-touch play and one-touch 
standby between your Easylink compliant 
devices by following the instructions 
in the previous  section  (see ‘Enable or 
disable EasyLink ’ on page  31 ).
 
 
 
 
 
 
Use Philips EasyLink
Your T V suppor ts Philips EasyLink, which 
uses the HDMI CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices 
that are connected through HDMI connectors 
can be controlled by a single remote control. 
  Note
The EasyLink-compliant device must be •
switched on and selected as the source.
Philips does not guarantee 10 0% 
•
interoperability with all HDMI CEC devices.
   
 
 
 
EasyLink features
Your T V suppor ts the following Easylink 
features :
•One-touch play:When you connect 
your T V to devices that suppor t one-
touch play, you can control your T V and 
the devices with one remote control. 
For example, when you press ‘Play’ on 
your DVD remote control, your T V 
automatically switches to the correct 
channel to show the DVD content. 
•One-touch standby: When you connect 
your T V to devices that suppor t standby, 
you can use your T V remote control to 
put your T V and all connected HDMI 
devices in standby mode.
•System audio control (One-touch audio): 
When you connect your T V to HDMI 
CEC compliant amplifi er (such as, a 
Home theatre system or an AV receiver), 
your T V can switch automatically to play 
audio from the connected amplifi er. To 
use one-touch audio, you must map the 
audio input from the connected amplifi er 
to your T V. You can use the remote 
control of the connected amplifi er or 
your T V to adjust the volume.
•Remote control pass-through (RC key 
forwarding):RC key for warding allows 
you to control EasyLink-compliant devices 
using your T V remote control.
•Pixel Plus Link:Overrides the settings of 
connected devices and uses the set tings 
of the T V.
English
EN
 
						

							32
   
 
 
 
 
Note
You must map the audio input from the •
connected device to your T V in order to use 
this feature.
   
 
 
 
Enable remote control pass-through
 
 
 
 
1  Enable one-touch play and one-touch 
standby between easylink compliant 
devices by following the instructions 
in the previous  section  (see ‘Enable or 
disable EasyLink ’ on page  31 ).
 
 
 
 
2 Press   ( Home).
 
 
 
 
3 Press   to select a device with 
HDMI connector from your home menu.
   
 
 
4 Press   OPTIONS.
 
 
 
 
5 Press   to select  [Enable RC pass] and 
press  OK.
RC pass-through is enabled on the  »
selected device.
  Note
Easylink compliant device must be connected •
to the T V via HDMI connector.
HDMI Device
Amplifier
HDMIHDMI
 
 
 
 
2 Press   ( Home).
 
 
 
 
3 Press   to select  [Setup] >[Sound]
>[TV speakers] >[Auto EasyLink].
The TV speakers are turned off  »
automatically when content from an 
Easylink compliant system is detected.
   
 
 
 
 
4 Press   to select  [Setup] >[Sound]
>[TV speakers] >[On] to disable 
system audio control and enable the T V 
speakers.
  Note
If you select  •[T V speakers] >[Of f ], the T V 
speakers are muted.
   
 
Connect an ampli
						

							33
•[Dev. root menu]Accesses the root 
menu of the CD/DVD/game disc.
•[Device setup menu]Accesses the 
main menu of the connected device 
such as DVD player, HDD recorder, 
or game console.
•[Dev. content menu]Accesses the 
content menu of the CD/DVD/game 
disc.
   
 
 
 
 
4 Press  OK to enter or activate your 
selection.
   
 
 
 
 
 
 
Use a Kensington lock
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
   
 
 
 
 
 
 
 
Disable remote control pass-through
 
 
 
 
1  Enable one-touch play and one-touch 
standby between easylink compliant 
devices by following the instructions 
in the previous  section  (see ‘Enable or 
disable EasyLink ’ on page  31 ).
 
 
 
 
2 Press   ( Home).
 
 
 
 
3 Press   to select a device with 
HDMI connector from your home menu.
   
 
 
4 Press   OPTIONS.
 
 
 
 
5 Press   to select  [Disable RC pass] and 
press  OK.
RC pass-through is disabled on the  »
selected device.
  Note
Easylink compliant device must be connected •
to the T V via HDMI connector.
 
 
 
 
 
Access menu after enabling RC pass-
through
   
 
 
1  Enable remote control pass-through by 
following the instructions in the previous 
section .
 
 
 
 
2 Press   to select a device that has 
been enabled to suppor t RC pass-
through and press  OK to enter.
 
 
 
 
3 Press   OPTIONS to access one of the 
following menus for T V or the active 
device connected to the T V:
•[TV setup]Accesses menus to 
change picture, sound and other 
settings.
•[Clock]Displays the clock on the T V 
screen.
•[TV speakers]Turns T V speakers 
on or off. Setting T V speakers 
to automatic mode turns off the 
speakers when content from an 
EasyLink-compliant home theatre 
system is detected.
English
EN
 
						

							34
   
 
 
 
 
 
 
 
 
Multimedia
Suppor ted storage device: USB (Only  •
FAT or FAT 32 USB storage devices are 
suppor ted) 
Suppor ted multimedia fi le formats: •
Images: JPEG •
Audio: MP3 •
 
Note
Multimedia fi le names must not exceed 32 •
characters. 
 
 
 
 
 
 
Tuner/Reception/
Transmission
Aerial input: 75ohm coaxial (IEC75) •
T V system: PAL I, B/G, D/K; SECAM B/G,  •
D/K , L /L’ 
Video playback: NTSC , SECAM, PAL •
Tuner Bands: Hyperband, S-channel, UHF,  •
VHF
   
 
 
 
 
 
 
Remote control
Ty p e :  P F 0 2 E 0 9 B •
Batteries: 2 x A A A (LR03 type) •
 
 
 
 
 
 
 
 
Power
Mains power: 220 -240V, 50Hz •
Standby power: 
						

							35
   
 
 
 
 
 
 
Supported TV  mounts
To mount the TV, purchase a Philips TV mount 
or  a VESA-compatible TV  mount. To  prevent 
damage to cables and connectors, be sure to 
leave a clearance of at least 2.2 inches or 5.5cm 
from the back of the TV.
  Warning
Follow all instructions provided with the T V •
mount. Koninklijke Philips Electronics N.V. 
bears no responsibility for improper T V 
mounting that results in accident, injur y or 
damage.
TV screen 
size (inches)Required 
pitch (mm)Required 
mounting bolts
19  75 x 75  4 x M4
22  100 x 100  4 x M4
26  200 x 100  6 x M4
32  200 x 200  4 x M6
42  400 x 400  4 x M6
English
EN
 
						

							36
   
 
 
 
 
TV channel issues
 
 
 
Previously installed channels do not appear in 
the channel list:
Check that the correct channel list is  •
selected.
   
 
 
 
 
Picture issues
 
 
 
The TV is on, but there is no picture:
Check that the antenna is properly  •
connected to the T V.
Check that the correct device is selected  •
as the T V source.
   
 
 
There is sound but no picture:
Check that the picture settings are  •
correctly set.
   
 
 
There is poor TV reception from an antenna 
connection:
Check that the antenna is properly  •
connected to the T V.
Loudspeakers, unear thed audio devices,  •
neon lights, high buildings and other large 
objects can infl uence reception quality. 
If possible, tr y to improve the reception 
quality by changing the antenna direction 
or moving devices away from the T V.
If reception on only one channel is poor,  •
fi ne tune this channel.
   
 
 
There is poor picture quality from connected 
devices:
Check that the devices are connected  •
properly.
Check that the picture settings are  •
correctly set. 
   
 
 
The TV did not save your picture settings:
Check that the T V location is set to the  •
home setting. This mode offers you the 
fl exibility to change and save settings.
   
 
 
 
 
The picture does not 
						

							37
   
 
 
 
 
Computer connection issues
 
 
 
The computer display on the TV is not stable:
Check that your PC uses the suppor ted  •
resolution and refresh rate.
Set the T V picture format to unscaled. •
 
 
 
 
 
 
Contact us
If you cannot resolve your problem, refer to 
the FAQs for this product at w w w.philips.
com/suppor t. 
If the problem remains unresolved, contact 
Philips Consumer Care in your countr y as 
listed in the Addendum.
  Warning
Do not at tempt to repair the product yourself. •
This may cause severe injur y, irreparable 
damage to your product or void your 
warranty.
  Note
Make a note of your T V model and serial •
number before you contact Philips. These 
numbers are printed on the back of the T V 
and on the packaging.
   
 
 
 
 
Sound issues
 
 
 
There is a picture but sound quality is poor:
 
Note
If no audio signal is detected, the T V •
automatically switches the audio output off 
— this does not indicate malfunction.
Check that all cables are properly  •
connected.
Check that the volume is not set to 0. •
Check that the sound is not muted. •
   
 
 
There is a picture but the sound quality is 
poor:
Check that the sound settings are  •
correctly set.
   
 
 
There is a picture but sound comes from one 
speaker only:
Verify that sound balance is set to the  •
centre.
   
 
 
 
 
HDMI connection issues
 
 
 
There are problems with HDMI devices:
Note that HDCP (High-bandwidth Digital  •
Content Protection) suppor t can delay 
the time taken for a T V to display content 
from a HDMI device. 
If the T V does not recognize the HDMI  •
device and no picture is displayed, tr y 
switching the source from one device to 
another and back again.
If there are intermittent sound  •
disruptions, check that output settings 
from the HDMI device are correct.
If you use an HDMI-to-DVI adapter  •
or HDMI to DVI cable, check that an 
additional audio cable is connected to 
AUDIO L/R or  AUDIO IN (mini - jack 
only).
English
EN
 
						

							38
   
digital services
teletex t  10 ,14 
   
display
resolution  34 
   
Dual view18 
 
 
 
 
E
 
 
EasyLink
disable  31
enable  31
one-touch play   31
one-touch standby   31
system audio control   31 ,31
   
Electronic Programme Guide
   
environmental care5
 
 
 
 
F
 
 
factory settings21 
   
favourites list
create list   14 
view list   14 
 
 
 
 
H
 
 
HDMI
troubleshooting  37 
   
home mode20
 
 
 
 
I
 
 
install channels
automatic  22 
manual  23 
 
 
 
 
K
 
 
Kensing ton lock33 
 
 
 
 
L
 
 
location20
   
lock
Kensing ton  33 
TV lock   17 
 
 
 
 
 
 
 
 
 
10 Index
 
 
 
A
 
 
antenna
 
 
 
 
B
 
 
bracket for wall mount35
 
 
 
 
C
 
 
channel list
favourite  14 
troubleshooting  36
   
Channels
favourite list   14 
install 
automatic  22 
manual  23 
rename  24 
reorder  25 
tune  24 
   
child lock
TV lock   17 
   
Clock17 
   
computer
technical specifi cations   34 
   
Connections
HDMI 
troubleshooting  37 
over view  26 
PC  37 ,30 
technical specifi cations   34 
troubleshooting  37 
   
connectors
over view  26 
 
 
 
 
D
 
 
demo21 
   
devices
add to home menu   11  
connect  26 
watch  10 
   
Digital channel
EN