Philips 32pfl5404 User Manual

							9
  Note
If you cannot locate your remote control and •
want to switch on the T V from standby, press 
P/CH +/- or  SOURCE at the side of the T V.
 
 
 
 
 
 
Switch channels
 
 
 
 
 
 
 
 
  
Press   •P +/- on the remote control or 
P/CH +/- on the side of the T V.
Enter a channel number using the  •
Numeric buttons.
Use the channel   • grid  (see ‘Switch 
channels with the channel grid’ on page 
10 ).
 
Note
When you use a favourite list, you can only •
select those channels in the list.
 
 
 
 
 
 
4 Use your 
product
This section helps you perform basic  operations 
(see ‘Use more of your product’ on page  11).
 
 
 
 
Switch your TV on/off or to 
standby
   
 
 
 
 
 
 
 
To  s w i t c h  o n
If the standby indicator is off, press   •
POWER at the side of the T V.
If the standby indicator is red, press   •
(Standby-On) on the remote control.
To switch to standby
Press   •
 ( Standby-On) on the remote 
control.
The standby indicator switches to red. »
To switch off
Press   •
POWER at the side of the T V.
The standby indicator switches off. »
 
Tip
Though your T V consumes ver y lit tle power •
when in standby, energy continues to be 
consumed. When not in use for an ex tended 
period of time, disconnect the T V power cable 
from the power outlet.
English
EN
 
						

							10
   
 
 
 
 
 
 
 
 
Adjust TV  volume
 
 
 
 
 
 
 
 
 
To increase or decrease volume
Press   •
 +/-.
Press   •VOLUME +/- on the side of the T V.
To mute or unmute sound
Press   •
 to mute the sound.
Press   •
 again to restore the sound.
 
 
 
 
 
 
 
 
Use teletext
 
 
 
  
 
 
 
 
 
 
1 Press  MHEG/TELETEXT.
The main index page appears. »
 
 
 
 
 
 
2  Select a page as follows:
Press the   •Numeric buttons to enter 
a page number
Press   •P +/- or  
 to view the nex t 
or previous page
Press the   •Colour buttons to select a 
colour coded item
Press   •
 BACK to return to a 
previously viewed page
   
 
 
 
 
3 Press  MHEG/TELETEXT to exit teletex t.
 
 
 
 
 
Switch channels with the channel grid
The channel grid allows you to view all 
available channels in a grid format.
   
 
 
 
 
 
1 Press  OK.
The channel grid appears. »
 
 
 
 
 
 
2 Press   to browse the channel grid 
and preview a channel.
The channel content is displayed after  »
a lapse of approximately two seconds.
   
 
 
 
 
3  When you fi nd a channel of your choice, 
press  OK to watch.
The selected channel appears. »
 
 
 
 
 
 
 
 
 
 
Watch connected devices
 
Note
Switch on the device before selecting it as a •
source on the T V.
 
 
 
 
Use the source button
 
 
 
 
 
 
 
1 Press   SOURCE.
The source list appears. »
 
 
 
 
 
 
2  Press the  Navigation buttons to select a 
device.
   
 
 
3 Press  OK to confi rm your choice.
The TV switches to the selected device. »
EN
 
						

							11
   
 
 
 
 
Remove devices from the 
home menu
If a device is no longer connected to the TV, 
remove it from the home menu.
   
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select a device to 
remove.
   
 
 
3 Press   OPTIONS.
The »[Remove device] list appears.
 
 
 
 
 
 
4 Press  OK and select  [Remove] to remove 
the device.
The selected device is removed from  »
the home menu.
   
 
 
 
 
 
 
 
 
Change picture and sound 
settings
Change picture and sound settings to suit your 
preferences. You can apply pre-defi ned settings 
or change settings manually.
   
 
 
Use settings assistant
Use the settings assistant to guide you through 
the picture and sound settings.
   
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] >[Picture]
>[Settings assistant].
 
 
 
 
3 Press  OK.
The »[Settings assistant] menu appears. 
Follow the on-screen instructions to 
choose your preferred picture settings.
   
 
 
 
 
 
 
 
5  Use more of 
your product
   
 
 
Access TV  menus
Menus help you to install channels, change 
picture and sound settings and access other 
features.
   
 
 
 
1 Press   ( Home).
The menu screen appears. »
 
 
  
 
 
 
 
 
 
2  Press the   to select and navigate 
through one of the following menus.
•[Watch TV]Switches back to the 
aerial source if another source is 
selected.
•[Setup]Accesses menus to change 
picture, sound and other settings.
•[Add new device]Adds new devices 
to the home menu.
   
 
 
 
 
3 Press  OK to confi rm your choice.
 
 
 
 
4 Press   ( Home)to exit.
 
Tip
Af ter selecting  •[Add new device], follow the 
on-screen instructions to select the correct 
device and connector.
Add new deviceSetup
Watch TV
English
EN
 
						

							12
•[Tint]Adjusts the colour balance in an 
image. 
•[Custom tint]Customises tint setting.
•[Pixel Plus HD]Adjusts picture quality to 
optimal contrast, colour and sharpness.
•[Dynamic contrast]Enhances 
contrast. A  [Medium] setting is 
recommended.
•[Dynamic backlight]Adjusts 
brightness of the T V backlight to 
match lighting conditions.
•[Colour enhancement]Makes 
colours more vivid and improves 
the details in bright colours. You can 
switch this feature on or off.
•[Light sensor]Adjusts settings dynamically 
to match lighting conditions.
•[PC mode]Adjusts the picture when a PC 
is connected to the T V via HDMI or DVI.
•[Picture format]Changes the picture 
format.
•[Horizontal shift]Adjusts the picture 
horizontally for PC-VGA or YPbPr ( 
EXT2 or EXT3).
•[Vertical shift]Adjusts the picture 
ver tically for PC-VGA or YPbPr ( EX T2 
or EXT3).
   
 
 
 
 
 
Change picture format
 
 
 
 
1 Press   FORMAT.
A picture format bar appears. »
 
 
 
 
 
 
2 Press   to select a picture format.
The selected picture format is  »
activated.
   
 
 
 
 
3 Press  OK to confi rm your choice.
 
 
 
 
 
Summary of picture formats
The following picture settings can be 
confi gured.
  Note
Depending on the format of the picture •
source, some picture set tings are not available.
 
 
 
 
 
 
 
 
 
Use smart picture
Use smar t picture to apply pre-defi ned 
picture settings.
   
 
 
1 Press   PICTURE.
The »[Smart picture] menu appears.
 
 
 
 
 
 
2 Press   to select one of the following 
smar t picture settings.
•[Personal]Lists customised picture 
settings.
•[Vivid]Applies rich and dynamic 
settings.
•[Standard]Adjusts picture settings 
to suit most environments and types 
of video.
•[MOVIE]Applies settings for movie 
viewing.
•[Game]Applies settings for games.
•[Energy saving]Applies low-energy 
settings.
   
 
 
 
 
3 Press  OK to confi rm your choice.
The selected smar t picture setting is  »
applied.
   
 
 
 
 
 
 
 
Manually adjust picture settings
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Picture].
The »[Picture] menu appears.
 
 
 
 
 
 
3 Press   to select one of the 
following picture settings.
•[Smart picture]Accesses pre-defi ned 
smar t picture settings.
•[Contrast]Adjusts the intensity of bright 
areas, keeping dark areas unchanged.
•[Brightness]Adjusts the intensity and 
details of dark areas.
•[Colour]Adjusts colour saturation.
•[Hue]Compensates colour variations in 
NTSC encoded transmissions.
•[Sharpness]Adjusts sharpness in the 
image.
•[Noise reduction]Filters and reduces 
noise in an image.
EN
 
						

							13
   
 
 
 
Use smart sound
Use smar t sound to apply pre-defi ned sound 
settings.
   
 
 
1 Press   SOUND.
The »[Smart sound] menu appears.
 
 
 
 
 
 
2 Press   to select one of the following 
smar t sound settings.
•[Standard]Adjusts sound settings to 
suit most environments and types of 
audio.
•[NEWS]Applies settings for spoken 
audio, such as news.
•[MOVIE]Applies settings for movies.
•[Personal]Applies the settings that 
were customised in the sound menu.
   
 
 
 
 
3 Press  OK to confi rm your choice.
The selected smar t sound setting is  »
applied.
   
 
 
 
 
 
 
 
Manually adjust sound settings
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] >[Sound].
The »[Sound] menu appears.
 
 
 
 
 
 
3 Press   to select one of the 
following sound settings.
•[Smart sound]Accesses pre-defi ned 
smar t sound settings.
•[Bass]Adjusts the bass level.
•[Treble]Adjusts the treble level.
•[Volume]Adjusts the volume.
•[Balance]Adjusts the balance of the 
right and lef t speakers.
•[Dual I-II]Selects audio languages if 
dual sound broadcast is available.
•[Mono/Stereo]Selects mono 
or stereo if stereo broadcast is 
available.
•[TV speakers]Turns T V speakers 
on or off. Setting T V speakers 
to automatic mode turns off the 
speakers when content from an 
EasyLink-compliant home theatre 
system is detected.
   
[Auto format](Not for 
HDMI, YPbPr - EX T2/
EX T3 or PC mode.) 
Enlarges the picture 
automatically to best fi t 
the screen. The subtitles 
remain visible.
   
[Super zoom](Not for HD 
and PC mode.) Removes 
the black bars on the side 
of 4:3 broadcasts. There is 
minimal distor tion.
   
[4:3]Shows the classic 4:3 
format.
   
[Subtitle zoom]Displays 
4:3 pictures over the full 
area of the screen, with 
sub-titles visible. Par t of 
the top of the picture is 
clipped off.
   
[Movie exp.14:9](Not for 
HD and PC mode.) Scales 
4:3 format to 14:9.
   
[Movie exp.16:9](Not for 
HD and PC mode.) Scales 
4:3 format to 16:9.
   
[Wide screen]Scales 4:3 
format to 16:9.
   
[Unscaled]Available in 
selected models with 
PC resolution under 
1024 x 768, only. Allows 
maximum sharpness. 
Some distor tion may 
be present due to the 
broadcaster’s systems. 
Set your PC resolution to 
wide screen mode for best 
results.
English
EN
 
						

							14
   
 
 
 
 
 
Select teletext subpages
A teletex t page can hold several subpages. 
Subpages are displayed on a bar nex t to the 
main page number.
   
 
 
1 Press  MHEG/TELETEXT .
The teletext screen appears. »
 
 
 
 
 
 
2  Select a teletex t page with subpages.
 
 
 
 
3 Press   to enter a subpage.
The subpage appears. »
 
 
 
 
 
 
4 Press   to switch between subpages.
 
 
 
 
 
 
 
Select T.O.P. teletext broadcasts
Table Of Pages ( T.O.P.) teletex t broadcasts 
allow you to jump from one subject to 
another without using page numbers. T.O.P. 
teletex t is not broadcast on all T V channels.
   
 
 
1 Press  MHEG/TELETEXT.
The teletext screen appears. »
 
 
 
 
 
 
2 Press   INFO.
The T.O.P. over view appears. »
 
 
 
 
 
 
3 Press   to select a subject.
 
 
 
 
4 Press  OK to view the page.
 
 
 
 
 
 
 
 
Create and use lists of 
favourite channels
You can create lists of your preferred TV 
channels and radio stations so that you can fi nd 
those channels easily.
  Tip
You can create and store up to four favourite •
lists on your T V.
 
 
 
 
 
Select a favourite list
 
 
 
 
1  When watching T V, press  OK to display 
the channel grid.
   
 
 
2 Press   OPTIONS.
The channel options menu appears. »
•[Surround]Enables spatial sound.
•[Headphone volume]Adjusts 
headphone volume.
•[Auto volume]Automatically reduces 
sudden volume changes, for example, 
when switching channels. 
•[Delta volume]Levels out volume 
differences between channels or 
connected devices. Switch to the 
connected device before you change 
the delta volume.
   
 
 
 
 
 
 
 
 
Use advanced teletext 
features
   
 
 
Access the teletext options menu
Access the teletex t features through the 
teletex t options menu.
   
 
 
1 Press  MHEG/TELETEXT.
The teletext screen appears. »
 
 
 
 
 
 
2 Press   OPTIONS.
The teletext options menu appears. »
 
 
 
 
 
 
3 Press   to select one of the following 
options.
•[Freeze Page]Freezes the current 
page.
•[Dual/Full screen]Enables and 
disables dual screen teletext.
•[Reveal]Hides or reveals hidden 
information on a page, such as 
solutions to riddles or puzzles.
•[Cycle subpage]Cycles through 
subpages automatically if subpages 
are available.
•[Language]Switches to a different 
language group to display a language 
correctly when it uses a different 
character set.
   
 
 
 
 
4 Press  OK to confi rm your choice.
 
 
 
 
5 Press  MHEG/TELETEXT to exit the 
teletex t options menu.
EN
 
						

							15
  Tip
When watching T V, press  • OPTIONS
>[Mark as favourite] to save the current 
channel into a favourite list.
   
 
 
 
Remove a channel from a favourite 
list
  Note
Select the favourite list to edit, before •
removing a  channel .
 
 
 
 
1  When watching T V, press  OK to display 
the channel grid.
   
 
 
2 Press   OPTIONS.
The channel options menu appears. »
 
 
 
 
 
 
3 Press  OK to enter  [Show favourite ch.].
 
 
 
 
4 Press   to select a favourite list and 
press  OK to confi rm the choice.
 
 
 
 
5 Press   to choose the channel that 
you wish to remove from the list.
   
 
 
6 Press   OPTIONS.
 
 
 
 
7 Press   to select  [Unmark as fav.].
 
 
 
 
8 Press  OK.
The channel is removed from the  »
favourite list.
   
 
 
 
 
 
 
 
 
Use timers
You can set timers to switch the TV to standby 
at a specifi ed time.
   
 
 
Automatically switch the TV to 
standby (sleep timer)
Sleep timer switches the T V to standby af ter a 
pre-defi ned period of time.
  Tip
You can switch off your T V earlier or reset the •
sleep timer during the countdown.
 
 
 
 
 
 
3 Press  OK to select  [Show favourite ch.].
The favourite lists appear. »
 
 
 
 
 
 
4 Press   to select a favourite list.
 
 
 
 
5 Press  OK.
Only channels in the favourite list  »
appear in the channel grid.
   
 
 
 
 
 
 
 
View all channels
You can exit a favourite list, and view all 
installed channels.
   
 
 
1  When watching T V, press  OK to display 
the channel grid.
   
 
 
2 Press   OPTIONS.
The channel options menu appears. »
 
 
 
 
 
 
3 Select  [Show favourite ch.] >[All] .
 
 
 
 
4 Press  OK.
All channels display in the channel grid. »
 
Note
All favourite channels are marked by an •
asterisk in the channel grid.
 
 
 
 
 
Add a channel to a favourite list
 
 
 
 
1  When watching T V, switch to the channel 
you want to add to a favourite  list  (s e e 
‘Switch channels’ on page  9).
 
 
 
 
2 Press   to select a channel to add to 
a favourite list.
   
 
 
3 Press   OPTIONS.
The channel options menu appears. »
 
 
 
 
 
 
4 Press   to select  [Mark as favourite].
 
 
 
 
5 Press  OK.
The favourite lists appear. »
 
 
 
 
 
 
6 Press   to select a favourite list to add 
the channel to.
   
 
 
7 Press  OK.
The channel is added to the favourite  »
list.
English
EN
 
						

							16
   
 
 
 
 
Use TV  lock
You can prevent your children from watching 
cer tain programs or cer tain channels by locking 
the TV  controls. 
   
 
 
Set or change the TV lock code
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Features] >[Set code].
 
 
 
 
3 Press   to enter the code setup.
 
 
 
 
4  Enter your code using the  Numeric 
buttons.
 
 
 
 
5  Re-enter the same code in the new 
dialogue box for confi rmation.
If the code is set successfully, the  »
dialogue box will disappear. However, if 
the code cannot be set, a new dialogue 
box will prompt you to re-enter the 
code.
   
 
 
 
 
6  If you want to change the code, select 
[Setup] >[Features] >[Change code].
 
 
 
 
7  Enter your current code using the 
Numeric buttons.
If the code is validated, a new dialogue  »
box will prompt you to enter your 
new code.
   
 
 
 
 
8  Enter the new code using the  Numeric 
buttons.
A message appears prompting you  »
to enter the new code again for 
confi rmation.
  Tip
If you forget your code, enter ‘8888’ to •
override any existing codes.
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Features] >[Sleeptimer].
The »[Sleeptimer] menu appears.
 
 
 
 
 
 
3 Press   to set the sleep time. 
The sleeptimer can be up to 180  »
minutes in steps of fi ve minutes. If 
set to zero minutes, the sleeptimer is 
switched off.
   
 
 
 
 
4 Press  OK to activate the sleeptimer.
The TV switches to standby after the  »
pre-defi ned period of time.
   
 
 
 
 
 
 
 
Automatically switch the TV on (on 
timer)
You can switch on the T V from standby to a 
specifi c channel at a specifi ed time.
   
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Features] >[On timer].
 
 
 
 
3 Press   to enter the  [On timer] menu.
 
 
 
 
4 Press   to select  [Activate] and set 
a frequency -  [Daily],[Once], or  [Of f ].
 
 
 
 
5 Press  OK to confi rm.
 
 
 
 
6 Press   to select  [Time] and set the 
star ting time.
   
 
 
7 Press  [Done] to confi rm.
 
 
 
 
8 Press   to select  [Programme no.]
and set the channel.
   
 
 
9 Press  OK to confi rm.
 
 
 
 
10 Press   ( Home) to exit.
 
Tip
Select  •[On timer] >[Activate] >[Of f ] to 
disable  [On timer].
When  
•[On timer] is  [Of f ], only  [Activate] can 
be selected. 
Set the T V clock before activating  
•[On 
timer]feature .
EN
 
						

							17
   
 
 
 
 
Use the TV clock
You can display a clock on the TV screen.
 
 
 
 
Set the TV clock
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Select  [Setup] >[Features] >[Clock]
The »[Clock] menu appears.
 
 
 
 
 
 
3 Press   or  Numeric buttons to 
enter time.
   
 
 
4 Press  [Done] to confi rm.
 
 
 
 
5 Press   ( Home)to exit.
 
 
 
 
 
 
 
 
Use Scenea
Scenea transforms your TV into a personalised 
photo frame. With Scenea enabled, you can 
display a single picture or a slideshow of 
pictures on your TV — perfect for par ties or 
other social gatherings.
  Note
Use Eco mode to save energy when the •
Scenea wallpaper or a slideshow is displayed 
on your  TV  (see ‘Use Eco mode with Scenea 
wallpaper’ on page  18 ).
Scenea wallpaper is not available in shop  
•mode 
(see ‘Change T V preferences’ on page  20 ) or 
MHEG mode (UK only).
   
 
 
Display a single picture with Scenea
 
 
 
 
1  While watching T V, press  SCENEA.
The default Scenea picture is displayed  »
on your TV.
   
 
 
 
 
2  Press any key except  (Standby-On) or  
 PICTURE to return to normal T V 
viewing.
   
 
 
 
Lock or unlock the TV
Lock the T V to prevent access to all channels 
and connected devices.
   
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Features] >[TV lock].
 
 
 
 
3 Press   to enter the  [TV lock].
A screen appears prompting you to  »
enter a code.
   
 
 
 
 
4  Enter your code using  Numeric buttons.
 
 
 
 
5 Press   to select  [Lock] or  [Unlock].
 
 
 
 
6 Press  OK.
All channels and connected devices are  »
locked or unlocked.
   
 
 
 
 
7 Press   ( Home) to exit.
 
Note
If you select  •[Lock], you have to enter your 
code ever y time you turn on your T V.
   
 
 
 
Lock or unlock one or more channels
 
 
 
 
1  When watching T V, press  OK to display 
the channel grid.
   
 
 
2 Press   to select a channel to lock 
or unlock.
   
 
 
3 Press   OPTIONS.
 
 
 
 
4 Press   to select  [Lock channel] or 
[Unlock channel] .
 
 
 
 
5  For each selection, press  OK to lock or 
unlock the channel.
  Note
Restar t the T V for the change to take effect.•
English
EN
 
						

							18
   
 
 
 
 
 
Use sleeptimer with Scenea wallpaper
By default, your T V displays the Scenea picture or 
slideshow for 120 minutes before entering standby 
mode. If sleeptimer is enabled, the Scenea picture 
or slideshow is displayed for the duration of the 
sleeptimer  (see ‘Use timers’ on page  15 ).
 
 
 
 
 
Use Eco mode with Scenea wallpaper
Using Eco mode with Scenea saves energy by 
lowering the T V brightness when a Scenea 
picture or a slideshow is displayed.
   
 
 
1  While a Scenea picture or slideshow is 
displayed, press  
 PICTURE.
The »[Eco mode] menu appears.
 
 
 
 
 
 
2 Press   to select  [On].
 
 
 
 
3 Press  OK.
Eco mode with Scenea is enabled. »
 
 
 
 
 
 
 
 
 
 
Watch TV in dual view
You can use the Dual View feature to display the 
TV channels and the input from a device with 
VGA or DVI connector (such as a computer or a 
satellite box) simultaneously on your TV.
   
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Features] >[Dual View].
 
 
 
 
3 Press  OK to activate  [Dual View].
The main screen displays the input  »
source from DVI or VGA.
The auxiliar y screen displays the last  »
viewed TV  channel.
   
 
 
 
 
4 Press   ( Home) to exit dual view.
 
Note
•[Dual View] is available only when the T V is 
connected to a device, such as a PC , via a VGA 
or DVI connection.
Connections via DVI or VGA require an 
•
additional audio  cable  (see ‘Connect a 
computer’ on page  30 ).
When in Dual view mode, press  
• +/- to 
adjust volume in the main screen and press  P 
+/- or  Numeric buttons to switch between 
the T V channels in the auxiliar y screen.
   
 
 
 
 
 
Personalize the Scenea picture
 
 
 
 
1  While the T V is on, connect the USB 
storage device containing your pictures 
( JPEG format only) to the USB connector 
at the side of your T V.
The home menu appears. If the home  »
menu does not appear, press  
 ( Home).
 
 
 
 
 
 
2 Select  [Browse USB], then press  OK.
The USB content browser appears. »
 
 
 
 
 
 
3 Press   to navigate to the picture of 
your choice.
   
 
 
4 Press  SCENEA.
Your picture is stored as the default  »
Scenea picture in your TV.
   
 
 
 
 
5  Disconnect the USB storage device. The 
device can be disconnected safely while 
the T V is on.
   
 
 
6  Follow the instructions to display your 
personalised Scenea  picture  (see ‘Display 
a single picture with Scenea’ on page  17  ).
 
Note
The fi le size of the picture must be less than •
1 MB .
If the T V is reset to factor y set tings, your 
•
personalised Scenea picture is removed 
from the T V. Repeat these instructions to 
personalise the Scenea picture again.
   
 
 
 
Display a slideshow of pictures with 
Scenea
   
 
 
1  While the T V is on, connect the USB 
storage device containing your pictures 
( JPEG format only) to the USB connector 
at the side of your T V.
The home menu appears. »
 
 
 
 
 
 
2 Press  SCENEA.
All pictures in your USB storage device are  »
displayed in a slideshow, star ting from the 
default Scenea picture stored in your TV.
   
 
 
 
 
3  Press any key except   ( Standby-On)
or  
 PICTURE to return to normal T V 
viewing.
EN