Philips 32pfl5404 User Manual

							19
  Tip
When in full screen mode, press  • to move 
between photos. 
   
 
 
 
View a slide show of your photos
 
 
 
 
1  When a full screen image of a photo is 
displayed, press  OK or  
.
A slide show begins from the selected  »
image.
   
 
 
 
 
2 Press:
•OK or  
 to pause the slide show.
The »
 icon appears.
Press   •
 or   to move between 
images.
Press   •BACK or  
 to stop the slide 
show. 
   
 
 
 
 
 
 
 
Change slide show settings
 
 
 
 
1  When viewing a slide show, press   
OPTIONS.
The slide show options menu appears. »
 
 
 
 
 
 
2 Press   to select one of the following.
•[Start/Stop slide.]Star ts or stops a 
slide show.
•[Slideshow trans.]Sets the transition 
from one picture to the nex t.
•[Slideshow freq.]Sets the amount of 
time that a picture is shown.
•[Rotate image]Rotates a picture.
•[Show info]Displays the picture 
name, date, size and nex t picture in 
the slide show.
   
 
 
 
 
3 Press  OK to confi rm your setting.
 
Note
•[Rotate image] and  [Show info] appear only 
when you press OK or  
 to pause the 
slideshow.
   
 
 
 
 
View photos and play music 
from a USB storage device
  Caution
Philips is not responsible if the USB storage •
device is not suppor ted, nor is it responsible 
for damage or loss of data from the device.
Use the USB connector to view photos or 
listen to music stored on a USB storage device.
   
 
 
 
1  Turn on the T V.
 
 
 
 
2  Connect the USB device to the USB por t 
on the side of your T V.
The home menu appears. »
 
 
  
 
 
 
 
 
 
3 Press   to select  [Browse USB].
 
 
 
 
4 Press  OK to confi rm.
The USB thumbnail browser appears. »
 
Tip
Press  • GUIDE to switch between thumbnail 
and fi le browsing views.
   
 
 
 
View photos
 
 
 
 
1  In the USB content browser, select 
[Picture] and press  
 to enter.
 
 
 
 
2 Press   GUIDE to switch between 
thumbnail and fi le browsing views.
   
 
 
3 Press   to select a photo or a photo 
album.
   
 
 
4 Press  OK to view the selected photo in 
full screen mode.
Add new device
Setup
Watch TVBrowse USB
English
EN
 
						

							20
   
 
 
 
 
 
 
 
 
Change TV  preferences
 
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Select  [Setup] >[Installation] > 
[Preferences].
 
 
 
 
3 Press  OK or  to enter  [Preferences].
•[Location]Optimises T V settings for 
your location - home or shop.
•[Volume bar]Displays the volume 
bar when you adjust the volume.
•[EasyLink]Enables one-touch play 
and one-touch standby between 
EasyLink-compliant devices. 
•[Pixel Plus Link]Overrides the 
settings of connected devices and 
uses the settings of the T V. (Available 
only when  [EasyLink] >[On] is 
selected).
•[Colour] Sets the colour television 
standard used in your area. Select 
one of the following:  [SECAM],
[NTSC],[AUTO] or  [PAL].
•[E-sticker]For shop mode only. Sets 
the location of the e-sticker.
   
 
 
 
 
4 Press   to select your preference.
 
 
 
 
5 Press  OK.
 
 
 
 
6 Press   ( Home) to exit.
 
 
 
 
 
 
 
 
Access decoder channel
You can map channels provided through a 
decoder or descrambler to your TV channel 
selection. In this way, you can select these 
channels by using the RC of your TV. The 
decoder or a descrambler must be connected 
to EXT1. 
   
 
 
Set decoder channel
Map channels from a decoder or descrambler
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Select  [Setup] >[Installation] > 
[Decoder].
 
 
 
 
 
Listen to music
 
 
 
 
1  In the USB thumbnail browser view, 
select  [MUSIC] and press  
 to enter.
 
 
 
 
2 Press   GUIDE to switch between 
thumbnail and fi le browsing views.
   
 
 
3 Press   to select music or a music 
album.
   
 
 
4 Press  OK to play the selected music.
 
 
 
 
 
Music settings
When listening to music, press   OPTIONS
to access one of the following music settings.
•[Repeat]
•[Play once]
•[Repeat]
•[Shuf
						

							21
   
 
 
3 Press   to enter  [Decoder].
 
 
 
 
4 Press   to enter  [Channel].
 
 
 
 
5 Press   to select channel number to 
map to the decoder/descrambler channel.
   
 
 
6 Press  OK.
 
 
 
 
7 Press   to select and enter  [Status].
 
 
 
 
8 Press   to select the connector used 
by the decoder/descrambler ( [None] or 
[EXT 1]).
 
 
 
 
9 Press  OK.
 
 
 
 
10 Press   ( Home) to exit.
 
Note
Select  •[None] if you do not want to map to 
the decoder/descrambler channel.
   
 
 
 
 
Start a TV demo
 
 
 
 
 
1 Press  DEMO on the remote control.
 
 
 
 
2 Press   to select a demo and press  OK
to view it.
   
 
 
3 Press  DEMO to exit.
 
 
 
 
 
 
 
 
Reset the TV to factory 
settings
You can restore the default picture and sound 
settings of your TV. The channel installation 
settings remain the same.
   
 
 
 
1 Press   ( Home).
 
 
 
 
2 Select  [Setup] >[Installation] >[Factory 
settings].
 
 
 
 
3 Press  OK or   to enter the  [Factory 
settings] menu.
»[Reset] is highlighted.
 
 
 
 
 
 
4 Press  OK to reset to factor y settings.
 
 
 
 
5 Press   ( Home) to exit.
English
EN
 
						

							22
   
 
 
 
 
 
Step 2 Install Channels
Select your countr y for proper channel 
installation. 
   
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Installation] >[Channel inst all.] > 
[Channel assist ant].
 
 
  
 
 
 
 
3 Press   to select your countr y and then 
 to go to the nex t step.
 
 
  
 
 
 
 
4 Select  [Start] and press  OK to re-install 
channels. 
   
  
As the system searches for channels,  »
you have the option to  [Stop] the 
process.
   
 
 
 
 
5  To stop searching, select  [Stop] and press 
OK.
A dialogue box appears asking  »
you if you really want to  [Stop] or 
[Continue] with the process.
Picture
Sound
Features
Installation
Software updateMenu language
Channel install.
Preferences
Decoder
Factory setting
Current softwareChannel assistant
Analogue: Manual
Select your countryAustria
Belgium
Croatia
Czech Republic
Denmark
Finland
France
Germany
Start automatic installation. This takes a few minutes.
Start?
   
 
 
 
 
 
 
 
6 Install channels
The fi rst time you set up your TV, you are 
prompted to select a menu language and to 
install TV and digital radio channels (if available). 
This chapter provides instructions on how to 
re-install and fi ne tune channels.
   
 
 
Automatically install channels
This section describes how to search and store 
channels automatically.
   
 
 
Step 1 Select your menu language
 
Note
Skip this step if your language set tings are •
correct.
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Installation] >[Language] >[Menu 
language].
 
 
 
 
3 Press   to enter  [Menu language].
 
 
 
 
4 Press   to select a language setting and 
then  OK to confi rm.
 
 
  
 
 
 
 
5 Press   ( Home) to exit.
Picture
Sound
Features
Installation
Software updateMenu language
Channel install.
Preferences
Decoder
Factory setting
Current softwareEnglish
Česky
Български
Dansk
Deutsch
Ελληνικά
Español
Français
EN
 
						

							23
   
 
 
 
 
 
 
 
Select your system
 
Note
Skip this step if your system set tings are •
correct.
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Installation] >[Channel inst all.] > 
[Analogue: Manual].
The »[Analogue: Manual] menu appears.
 
 
 
 
 
 
3 Press   to select and enter 
[System].
 
 
 
 
4 Press   to select your countr y or 
region.
   
 
 
5 Press  OK to confi rm.
 
 
 
 
6 Press   ( Home) to exit.
 
 
 
 
 
 
 
Search and store new TV channels
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Installation] >[Channel inst all.] > 
[Analogue: Manual].
The »[Analogue: Manual] menu appears.
 
 
 
 
 
 
3 Press   to select and enter  [Search].
 
 
 
 
4 Press  Numeric buttons to manually enter 
the three-digit frequency.
   
 
 
5 Press  OK to begin search.
If a channel is unavailable at the  »
selected frequency, the system searches 
for the next available channel.
   
 
 
 
 
6 Press   BACK when the new channel is 
found.
   
 
 
7 Press   to select  [Store new channel]
to store the new channel under a new 
channel number.
   
 
 
8 Press   to enter  [Store new channel].
 
 
 
 
9 Press  OK to store the new channel.
 
 
 
 
10 Press   ( Home) to exit.
 
 
 
 
 
 
6 Press   to select  [Stop] or  [Continue].
 
 
 
 
7 Press  OK to confi rm your choice.
 
 
 
 
8  When done, press   ( Home) to exit.
 
 
 
 
 
 
 
 
Manually install channels
This section describes how to search and store 
analogue TV channels manually.
   
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Installation] >[Channel inst all.] > 
[Analogue: Manual].
The »[Analogue: Manual] menu appears.
 
 
  
 
 
 
 
 
 
3 Press   to select the item you want to 
adjust.
•[System]
•[Search]
•[Channel number]
•[Fine-tune]
•[Store cur. chan.]
•[Store new channel]
•[Skip channel]
Picture
Sound
Features
Installation
Software updateMenu language
Channel install.
Preferences
Decoder
Factory setting
Current softwareChannel assistant
Analogue: Manual
English
EN
 
						

							24
   
 
 
 
 
 
Skip channels
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Installation] >[Channel inst all.] > 
[Analogue: Manual].
The »[Analogue: Manual] menu appears.
 
 
 
 
 
 
3 Press   to select and enter  [Skip 
channel].
 
 
 
 
4 Press   to select  [Yes] and press  OK to 
skip current channel.
The selected channel is skipped when  »
you press  P +/- on your remote 
control or view the channel grid.
   
 
 
 
 
5 Press   ( Home) to exit.
 
Note
You can restore a skipped channel to your •
channel  listing .
 
 
 
 
 
 
Rename channels
You can rename channels. The name appears 
when you select the channel.
   
 
 
 
1  When watching T V, press  OK to display 
the channel grid .
   
 
 
2  Select the channel you want to rename.
 
 
 
 
3 Press   OPTIONS.
The channel options menu appears. »
 
 
 
 
 
 
4 Press   to select and enter  [Rename 
chan.].
A text input box appears. »
 
 
 
 
 
 
5 Press   to select characters.
 
 
 
 
6 Press  OK to confi rm each of the 
characters.
  Tip
Rename channels - a channel name can be up •
to six characters long.
Press  
•[Aa] to change an uppercase let ter to a 
lowercase let ter and vice versa.
   
 
 
 
 
 
Change the channel number
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Installation] >[Channel inst all.] > 
[Analogue: Manual].
The »[Analogue: Manual] menu appears.
 
 
 
 
 
 
3 Press   to select and enter 
[Channel number].
The screen displays the channel that  »
you are watching.
   
 
 
 
 
4 Press   to change the channel number.
 
 
 
 
5 Press  OK to confi rm.
 
 
 
 
6 Press   to select  [Store new channel]
to store channel number.
   
 
 
7 Press   to enter  [Store new channel].
 
 
 
 
8 Press  OK to store the new channel.
 
 
 
 
9 Press   ( Home) to exit.
 
 
 
 
 
 
 
Fine-tune analogue channels
 
 
 
 
1 Press   ( Home).
 
 
 
 
2 Press   to select  [Setup] > 
[Installation] >[Channel inst all.] > 
[Analogue: Manual].
The »[Analogue: Manual] menu appears.
 
 
 
 
 
 
3 Press   to select and enter  [Fine-
tune].
 
 
 
 
4 Press   to adjust frequency.
 
 
 
 
5 Press  OK to confi rm.
 
 
 
 
6 Press   to select  [Store cur. chan.] to 
store channel number.
   
 
 
7 Press   to enter  [Store cur. chan.].
 
 
 
 
8 Press  OK to store the current channel.
 
 
 
 
9 Press   ( Home) to exit.
EN
 
						

							25
   
 
 
 
 
Reorder channels
After you install channels, you can rearrange the 
order in which they appear.
   
 
 
 
1  When watching T V, press  OK to display 
the channel grid.
   
 
 
2 Press   OPTIONS.
The channel options menu appears. »
 
 
 
 
 
 
3 Press   to select  [Reorder], then press 
OK.
 
 
 
 
4  Select the channel to rearrange, then 
press  OK.
The selected channel is highlighted. »
 
 
 
 
 
 
5 Press   to move the highlighted 
channel to the desired location, then 
press  OK.
 
 
 
 
6 Press   OPTIONS.
»[Done reordering] appears on the 
screen.
   
 
 
 
 
7 Press  OK to confi rm.
 
 
 
 
8 Press   BACK to exit the channel grid.
English
EN
 
						

							26
   
  
b  HDMI 1 
Digital audio and video input from high-
defi nition digital devices such as Blu-ray 
players.
   
  
c  SERV. U 
For use by ser vice personnel only.
d  SPDIF OUT 
Digital audio output to home theatres 
and other digital audio systems.
   
  
e  TV ANTENNA 
Signal input from an antenna, cable or 
satellite.
VGA
VGA
PC IN(AUDIO)
    
 
 
 
 
 
 
 
7 Connect devices
This section describes how to connect devices 
with different connectors. Examples are 
provided in the Quick Star t.
  Note
You can use different types of connectors to •
connect a device to your T V.
 
 
 
 
Back connectors for 19-22 
inch TV
   
  
a  PC IN  ( VGA  and  AUDIO IN )
Audio and video input from a computer.
SERV.U
EN
 
						

							27
h  EXT 2  ( Y Pb Pr  and  AUDIO L /R )
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
   
 
 
 
 
 
 
Back connectors for 26 inch 
and larger TV
   
 
a  PC IN  ( VGA  and  AUDIO IN )
Audio and video input from a computer.
SERV.U
HDMI 2/ DVI
VGA
   
  
f  AV OUT  ( VIDEO OUT  and  AUDIO 
OUT L/R )
Audio and video output to analogue devices 
such as another T V or a recording device.
   
 
g  EXT 1  ( RGB  and  CVBS )
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
   
 
TV ANTENNA
AUDIOIN
English
EN
 
						

							28
   
 
e  EXT 1  ( RGB  and  CVBS ) /  CVBS  ( EXT 2 )
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles. EX T2 suppor ts 
S-Video.
   
 
f  EXT 3  ( Y Pb Pr  and  AUDIO L /R )
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
EXT1/ EXT2
(RGB/CVBS)/ (CVBS)
   
 
b  HDMI  1/2
Digital audio and video input from high-
defi nition digital devices such as Blu-ray 
players.
   
 
c  TV ANTENNA 
Signal input from an antenna, cable or 
satellite.
   
 
d  SPDIF OUT 
Digital audio output to home theatres 
and other digital audio systems.
VGA
VGA
PC IN(AUDIO)
 
/ HDMI 2
TV ANTENNA
EN