Philips 32pfl5403 User Manual

EN-9
EN
Align the plate/bracket to the four  2. 
mounting nuts, placing the supplied 
spacers between the plate/bracket and the 
mounting nuts.
Using a spanner or cross-head screwdriver, 
insert the supplied bolts through the plate/
bracket and spacers, tightly securing the 
bolts to the mounting nuts.
x4
Continue with the instructions provided  3. 
with your VESA-compatible wall bracket.
Connect the antenna cable 3.3 
HDMI 3HDMI 2
CVIAV INAV OUT
VIDEOLRLPrPbYRLAUDIO INSERV. CVGA
RLRVIDEO
HDMI 1
TV...

EN-10
Manage cables 3.5 
Route your mains cord, antenna cable and all 
other device cables through the cable holder at 
the back of the TV. This holder helps keep your 
cables tidy and easily manageable.
Insert the remote control  3.6 
batteries
Slide the battery cover off the back of the  1. 
remote control.
Insert the two supplied batteries. Be sure  2. 
the + and - ends of the batteries line up 
with the markings inside the case.
Slide the cover back into position. 3. 
Note    D
Remove the batteries...

EN-11
EN
Use your TV  4 
This section helps you perform basic TV 
operations. Instructions on advanced TV opera-
tions are provided in Section 5 Use more of your 
TV.
  4.1  Switch your TV on/off or to 
standby
Switch on your TV 4.1.1. 
POWER CHANNELMENU VOLUME
indicator Power
Press  • POWER on the side of the TV. 
An indicator light comes on.
Switch off your TV 4.1.2. 
Press  • POWER on the side of the TV. 
The indicator light switch off.
Switch your TV to standby 4.1.3. 
Press  • . POWER on the remote...

EN-12
Adjust volume 4.2.2. 
Press  • VOLUME + or - on the remote 
control.
Press  • VOLUME + or - on the side 
controls of your TV.
Press  • 
 on the remote control to mute 
the sound. Press 
 again to unmute on the 
sound.
Watch connected devices 4.3 
Switch on the device. 1. 
Press  2. SOURCE on the remote control 
then select the input your device is 
connected to.
Press  3. OK to select the device.
Use teletext 4.4 
Most TV channels broadcast information via 
teletext.
Press  1. ¤ on the remote...

EN-13
EN
Use Ambilight  4.5 
Ambilight    Dis not available in all models. 
Ambilight is an innovative Philips feature that 
adds reactive ambiant lighting to your viewing 
experience.
Press  1. AMBILIGHT on the remote 
control. Ambilight turns on.
Press  2. AMBILIGHT again to turn off 
Ambilight.
For more information on Ambilight, see Section 
5.4 Adjust Ambilight  settings.
Tip   E
A dimly lit room is ideal for a complete 
Ambilight experience.
 

EN-14
Use more of your TV 5 
This section helps you perform advanced TV 
operations, including how to:
Use the TV menus ( • Section 5.2)
Adjust picture and sound settings  • 
(Section 5.3)
Adjust Ambilight settings ( • Section 5.4)
Use advanced teletext features ( • Section 5.5)
Create a surf list ( • Section 5.6)
Use timers and child lock ( • Section 5.7)
Use Demo mode ( • Section 5.8)
   
Remote control overview 5.1 
This section provides a detailed overview of 
remote control features.
4 2
10
16
13...

EN-15
EN
POWER 1. 
Switches the TV on from standby or back 
to standby.
SOURCE 2. 
Selects connected devices.
ACTIVE CONTROL 3. 
Select On, Off, or On + Light Sensor*. 
The TV measures and corrects incoming 
signals to provide the best picture. 
DEMO* 4. 
Toggles the Demo menu on or off.
SURF 5. 
Stores favourite channels.
COLOUR KEYS 6. 
Selects tasks or teletext pages.
FORMAT 7. 
Toggles through a selection of picture 
formats. 
OK 8. 
Accesses the menus and activates settings.
NAVIGATION KEYS 9....

EN-16
Use TV  menus 5.2 
On-screen menus help you install your TV, 
adjust picture, sound and Ambilight settings and 
access other features. This section describes 
how to navigate the menus.
Access the main menu 5.2.1. 
Press  1. MENU on the remote control to 
display the main menu.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationBrightness
Colour
Contrast
Sharpness
Colour Temp
* Available in selected models
Press  2. MENU to exit.
The main menu offers the following...

EN-17
EN
Press  2. Æ to enter the Picture Setting 
menu.
Picture Setting
Brightness
Colour
Contrast
Sharpness
Colour Temp
Press  3. Æ to select Brightness.
Press  4. Æ to enter the Brightness setting.
Brightness
Press  5. Î or ï to adjust the setting.
Press  6. Í to return to the Picture settings 
or press MENU to exit.
Note   D
More choices are available when HD 
equipment or PC is connected.
Adjust picture and sound  5.3 
settings
This section describes how to adjust picture 
and sound settings.
Adjust...

EN-18
the best picture possible. Switch on, off, or 
on+light sensor*.
  • Artifacts Reduction*
Smoothens the transitions on digital 
pictures. Switch on or off.
HD Natural Motion* • 
Reduces the field and line flicker and 
reproduces smooth movement especially in 
movies. Switch on or off.
* Available in selected models.
  5.3.2.  Use Smart Mode
Apart from manually adjusting picture settings, 
you can use Smart Mode to set your TV to a 
predefined picture, sound and Ambilight setting.
Press  1. SMART...