Philips 32pfl5403 User Manual

							EN-9
EN
Align the plate/bracket to the four  2. 
mounting nuts, placing the supplied 
spacers between the plate/bracket and the 
mounting nuts.
Using a spanner or cross-head screwdriver, 
insert the supplied bolts through the plate/
bracket and spacers, tightly securing the 
bolts to the mounting nuts.
x4
Continue with the instructions provided  3. 
with your VESA-compatible wall bracket.
Connect the antenna cable 3.3 
HDMI 3HDMI 2
CVIAV INAV OUT
VIDEOLRLPrPbYRLAUDIO INSERV. CVGA
RLRVIDEO
HDMI 1
TV ANTENNA75X
  1. Locate the TV ANTENNA connector at 
the back of the TV.
Connect one end of the antenna cable  2. 
(not supplied) to the TV ANTENNA 
connector. Use an adaptor if the antenna 
cable does not fit.
Connect the other end of the antenna  3. 
cable to your antenna outlet, ensuring that 
the cable is tightly secured at both ends.
Connect the  3.4  mains cord
WARNING   B
Verify that your mains voltage corresponds 
with the voltage printed at the back of the 
TV.  Do not insert the mains cord if the 
voltage is different.
To connect the mains cord 3.4.1. 
Note   D
The location of the mains connector varies 
according to TV model.
Locate the  1. AC IN mains connector at the 
back or on the bottom of the TV.
Connect the mains cord to the  2. AC IN 
mains connector.
Connect the mains cord to the mains,  3. 
ensuring that the cord is tightly secured at 
both ends.
 
						

							EN-10
Manage cables 3.5 
Route your mains cord, antenna cable and all 
other device cables through the cable holder at 
the back of the TV. This holder helps keep your 
cables tidy and easily manageable.
Insert the remote control  3.6 
batteries
Slide the battery cover off the back of the  1. 
remote control.
Insert the two supplied batteries. Be sure  2. 
the + and - ends of the batteries line up 
with the markings inside the case.
Slide the cover back into position. 3. 
Note    D
Remove the batteries if not using the 
remote control for an extended period of 
time.
Switch on the TV 3.7 
The first time you switch on the TV, check that 
the mains cord is properly connected. When 
ready, turn on the mains, then press POWER 
on the side of the TV.
Select your location 3.8 
The first time and only the first time when 
you switch on the TV, an on-screen display will 
prompt you to select a location. The location 
settings is to maximise your viewing pleasure 
depending on your environment at home or at 
the shopfloor.
Location
Home
Shop
Please select location 
to continue
Press  4. Î or ï a location.
Press  5. OK to confirm your choice.
Re-select your location 3.9 
If you wish to re-select your location, see 
Section 6.4 Change to Shop or Home mode.
 
						

							EN-11
EN
Use your TV  4 
This section helps you perform basic TV 
operations. Instructions on advanced TV opera-
tions are provided in Section 5 Use more of your 
TV.
  4.1  Switch your TV on/off or to 
standby
Switch on your TV 4.1.1. 
POWER CHANNELMENU VOLUME
indicator Power
Press  • POWER on the side of the TV. 
An indicator light comes on.
Switch off your TV 4.1.2. 
Press  • POWER on the side of the TV. 
The indicator light switch off.
Switch your TV to standby 4.1.3. 
Press  • . POWER on the remote control. 
Tip    E
Though your TV consumes very little power 
when in standby, energy continues to be 
consumed as long as the mains remain 
connected and powered. When not in use 
for extended periods of time, switch off and 
disconnect the TV from the mains.
Switch on the TV from standby 4.1.4. 
If the standby indicator is on (red), press  • . 
POWER on the remote control.
Note   D
If you cannot locate your remote control 
and you want to switch on the TV from 
standby, press CHANNEL + or - on the 
side of the TV. 
Watch TV 4.2 
Switch channels 4.2.1. 
Press a number (0 to 99) or press  • CH +/- 
on your remote control.
Press  • CHANNEL +/- on the side controls 
of the TV. 
Press  • A/CH on the remote control to 
return to the previously viewed TV channel.
 
						

							EN-12
Adjust volume 4.2.2. 
Press  • VOLUME + or - on the remote 
control.
Press  • VOLUME + or - on the side 
controls of your TV.
Press  • 
 on the remote control to mute 
the sound. Press 
 again to unmute on the 
sound.
Watch connected devices 4.3 
Switch on the device. 1. 
Press  2. SOURCE on the remote control 
then select the input your device is 
connected to.
Press  3. OK to select the device.
Use teletext 4.4 
Most TV channels broadcast information via 
teletext.
Press  1. ¤ on the remote control.
The main index page appears.
To select a page with the remote control: 2. 
•  Enter the page number with the number 
 keys.• Press CH +/- or Î/ï to view the 
  next or the previous page.
•  Press a colour key to select one of the 
  colour coded items at the bottom of the 
 screen.
Press  3. ¤ again to switch off teletext.
For more information on teletext, see Section 
5.5 Use advanced teletext features.
 
						

							EN-13
EN
Use Ambilight  4.5 
Ambilight    Dis not available in all models. 
Ambilight is an innovative Philips feature that 
adds reactive ambiant lighting to your viewing 
experience.
Press  1. AMBILIGHT on the remote 
control. Ambilight turns on.
Press  2. AMBILIGHT again to turn off 
Ambilight.
For more information on Ambilight, see Section 
5.4 Adjust Ambilight  settings.
Tip   E
A dimly lit room is ideal for a complete 
Ambilight experience.
 
						

							EN-14
Use more of your TV 5 
This section helps you perform advanced TV 
operations, including how to:
Use the TV menus ( • Section 5.2)
Adjust picture and sound settings  • 
(Section 5.3)
Adjust Ambilight settings ( • Section 5.4)
Use advanced teletext features ( • Section 5.5)
Create a surf list ( • Section 5.6)
Use timers and child lock ( • Section 5.7)
Use Demo mode ( • Section 5.8)
   
Remote control overview 5.1 
This section provides a detailed overview of 
remote control features.
4 2
10
16
13
191
18
22
23
6
20
3
5
7
8
9
11
12
1415
17
21
   
 
						

							EN-15
EN
POWER 1. 
Switches the TV on from standby or back 
to standby.
SOURCE 2. 
Selects connected devices.
ACTIVE CONTROL 3. 
Select On, Off, or On + Light Sensor*. 
The TV measures and corrects incoming 
signals to provide the best picture. 
DEMO* 4. 
Toggles the Demo menu on or off.
SURF 5. 
Stores favourite channels.
COLOUR KEYS 6. 
Selects tasks or teletext pages.
FORMAT 7. 
Toggles through a selection of picture 
formats. 
OK 8. 
Accesses the menus and activates settings.
NAVIGATION KEYS 9. 
Navigates the menu.
SMART MODE 10. 
Toggles through predefined picture and 
sound settings.
CHANNEL (CH) +/- 11. 
Switches to the next or previous channel.
MUTE 12. 
Turns the sound on or off.
NUMBER KEYS 13. 
Selects a channel, page or setting.
ALTERNATE CHANNEL 14. 
Returns to the previously-viewed channel.
STATUS/EXIT 15. 
Displays channel information or exits from 
a menu.
VOLUME +/- 16. 
Increases or decreases volume.
   
  17. MENU/EXIT
Switches the menu on or off. BACK 18. 
To return to the previous menu.
INCREDIBLE SURROUND 19. 
Enables Incredible Surround with stereo 
sources. Spatial mode is enabled with mono 
sources.
  20. DUAL SOUND
Switches Stereo and Nicam Stereo 
to Mono. Selects first language (Dual å) 
or second language (Dual »)in bilingual 
programmes.
SLEEP 21. 
Activates the sleep timer. 
AMBILIGHT 22. *
Switches Ambilight on or off. 
TELETEXT  23. 
Switches Teletext on or off. 
* Available in selected models.
 
						

							EN-16
Use TV  menus 5.2 
On-screen menus help you install your TV, 
adjust picture, sound and Ambilight settings and 
access other features. This section describes 
how to navigate the menus.
Access the main menu 5.2.1. 
Press  1. MENU on the remote control to 
display the main menu.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationBrightness
Colour
Contrast
Sharpness
Colour Temp
* Available in selected models
Press  2. MENU to exit.
The main menu offers the following items:
Picture Setting • 
To adjust picture settings such as 
Brightness, Colour, Contrast, Sharpness, and 
Colour Temperature.  See Section 5.3 Adjust 
Picture and Sound settings.
Advanced Picture • 
To turn on or off Advanced Picture settings 
such Contrast+, Active Control, Artifacts 
Reduction* and HD Natural Motion*. See 
Section 5.3 Adjust Picture and Sound settings.
* Available in selected models.
Sound • 
To adjust sound settings such as Equalizer, 
Balance, Auto Volume Leveller, Incredible 
Surround, and BBE. See Section 5.3 Adjust 
Picture and Sound settings.
Ambilight • 
To turn Ambilight on or off and to change 
the mode. See Section  5.4 Adjust Ambilight 
settings.
Features • 
To turn features on or off and to adjust 
special features such as Timer, Child Lock, 
Parental Lock and Demo See Section 5.7 
Use timers and child lock and Section 5.8 Use 
Demo mode.
Install • 
To select the display language, auto store, 
manual store, sort and name TV channels, 
and to store a list of favourite channels. See 
Section 6 Install channels.
Location • 
To change your TV location to the Home 
or Shop mode. See Section 6.4 Change to 
Shop or Home mode.
Use the main menu 5.2.2. 
This section describes how to use the main 
menu.
Press  1. MENU on the remote control to 
display the main menu.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationBrightness
Colour
Contrast
Sharpness
Colour Temp
* Available in selected models
 
						

							EN-17
EN
Press  2. Æ to enter the Picture Setting 
menu.
Picture Setting
Brightness
Colour
Contrast
Sharpness
Colour Temp
Press  3. Æ to select Brightness.
Press  4. Æ to enter the Brightness setting.
Brightness
Press  5. Î or ï to adjust the setting.
Press  6. Í to return to the Picture settings 
or press MENU to exit.
Note   D
More choices are available when HD 
equipment or PC is connected.
Adjust picture and sound  5.3 
settings
This section describes how to adjust picture 
and sound settings.
Adjust picture settings 5.3.1. 
  1. Press MENU on the remote control and 
select Picture Setting or Advanced 
Picture.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationBrightness
Colour
Contrast
Sharpness
Colour Temp
* Available in selected models
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationContrast+
Active Control
Artifacts Reduction*
HD Natural Motion*
* Available in selected models
Press  2. Æ to enter the list.
Press  3. Î or ï to select a setting:
    • Brightness
Changes the level of light in the picture.
  • Colour
Changes the level of saturation.
Contrast • 
Changes the level of bright parts in the 
picture keeping the dark parts unchanged.
  • Sharpness
Changes the level of sharpness of fine 
details.
Colour Temperature • 
Sets the colours to Normal, Warm 
(reddish) or Cool (bluish). 
  • Contrast+
Changes the contrast range of the picture. 
Switch on or off. 
  • Active Control
Corrects all incoming signals to provide 
 
						

							EN-18
the best picture possible. Switch on, off, or 
on+light sensor*.
  • Artifacts Reduction*
Smoothens the transitions on digital 
pictures. Switch on or off.
HD Natural Motion* • 
Reduces the field and line flicker and 
reproduces smooth movement especially in 
movies. Switch on or off.
* Available in selected models.
  5.3.2.  Use Smart Mode
Apart from manually adjusting picture settings, 
you can use Smart Mode to set your TV to a 
predefined picture, sound and Ambilight setting.
Press  1. SMART MODE on the remote 
control to toggle through a selection of 
pre-defined picture and sound settings.
Summary of smart modes
Vivid • 
Sharp picture settings and clear sound for 
high action.
Standard • 
For normal TV viewing.
Movie • 
Brilliant picture settings for a cinematic 
experience. 
Game • 
Optimised for PCs, game consoles and 
playstations.
Power Saver • 
Eco friendly settings to reduce power 
consumption.
Personal • 
Based on the settings you customised in 
the Picture Setting menu.
Note:    DThe power meter displayed on the 
screen indicates the power consumption 
for each mode. For example, 10% means 
this mode uses 10% of the TV’s total powr 
consumption in wattage.
10%
Power
100%
0%
Change picture format 5.3.3. 
Change the picture format to suit your content.
Press 1. 
 ∏ on your remote control.
Press  2. Í or Æ to select one of the following 
picture formats:
Wide screen • 
The picture is displayed in the original 
proportions of images transmitted in 16:9 
format.
Note:    DIf you display a 4:3 picture in 
widescreen mode, the picture is stretched 
horizontally.