Philips 32pfl5403 User Manual
Have a look at the manual Philips 32pfl5403 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
EN-19 EN • 4:3 The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. Movie expand 14:9 • The picture is shown in 14:9 format. A thin black band remains on both sides of the picture and the top and bottom of the picture is clipped off. Movie expand 16:9 • The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures with black bands at the top and bottom (letterbox). In this mode, large parts of the top and the bottom of the picture are clipped off. Subtitle Zoom • This mode is used to display 4:3 pictures using the full surface of the screen leaving the sub-titles visible. Part of the top of the picture is clipped off. Super zoom • This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture. Adjust sound settings 5.3.4. This section describes how to adjust sound settings. Press 1. MENU on the remote control and select Sound. Press 2. Æ to enter the list. Main Picture Setting Advanced Picture Sound Ambilight* Features Install LocationEqualizer Balance Auto Vol. Leveller Incr. Surround BBE * Available in selected models Press 3. Î or ï to select one of the following settings: • Equalizer Adjusts each individual frequency (tone). Balance • Balances the left and right speaker’s sound level. Auto Volume Leveller • Controls the sudden sound level increase when changing channels or during commercial break. • Incredible Surround Enhances stereo effect. Select Incr. Surround or Stereo (when in stereo
EN-20 mode) or Mono or Spatial (when in mono mode). BBE • (High definition sound) An enhancement technology licensed by BBE Sound. Restores clarity and presence for better speech intelligibility and musical realism. Adjust Ambilight settings 5.4 This feature is not available on all models. 1. Press MENU on the remote control and select Ambilight. Press 2. Æ to enter the list. Main Picture Setting Advanced Picture Sound Ambilight Features Install LocationAmbilight Brightness Mode Colour Custom colour Balance Press 3. Î or ï to select one of the following settings: Ambilight • Switches Ambilight on or off. • Brightness Changes the light output of Ambilight. • Mode Chooses from four Ambilight modes: Colour, Relaxed, Moderate, and Dynamic. • Colour Selects a pre-defined colour setting (Warm white, Cool white, Blue, Red, Green, Yellow, Magenta, or make a custom colour of your own. Note D This option appears only after you select Mode >Colour above. Custom Colour • Sets the colour saturation or palette. Note D This option appears only after you select Colour > Custom above. • Balance Sets the level of Ambilight on the left and right side of the TV. Caution C To avoid poor remote control reception, do not place remote control sensors on your devices in range of Ambilight. Use advanced teletext 5.5 features Depending on model, your TV has a 1,000 page memory that stores broadcasted teletext pages and sub pages. The teletext memory reduces page loading time. To select a teletext page, see Section 4.4 Use teletext. Select teletext sub pages 5.5.1. A teletext page can hold several sub pages. Sub pages are displayed on a bar next to the main page number. Press 1. ¤ on the remote control. Select a teletext page. 2. Press 3. Í or Æ to select a subpage. Select T.O.P. teletext broadcasts 5.5.2. Table Of Pages (T.O.P.) teletext broadcasts allow you to jump from one subject to another without using page numbers. T.O.P. teletext is not broadcast on all TV channels. Press 1. ¤ on the remote control. Press 2. STATUS/EXIT.
EN-21 EN The T.O.P. overview appears. Press 3. Í, Æ or Î, ï to select a subject. Press 4. OK to view the page. Search teletext 5.5.3. You can quickly jump to a subject linked to a series of page numbers or search for specific words in teletext pages. Press 1. ¤ on the remote control. Press 2. OK to highlight the first word or number. Press 3. Î, ï or Í, Æ to jump to the next word or number on the page. Press 4. OK to search a page which holds the highlighted word or number. Press 5. Î until no word or number is highlighted to quit the search. Enlarge teletext pages 5.5.4. For more comfortable reading, you can enlarge the teletext page. Press 1. ¤ on the remote control and select a teletext page. Press 2. Î or ï on the remote control to enlarge the top half of the page. Press again to enlarge the bottom half of 3. the page. Press again to return to the normal page 4. size. Hold teletext pages 5.5.5. Certain pages contain sub-pages which are automatically displayed successively. Press 1. ¤ on the remote control. Press 2. Ó to stop or resume sub-page progression. Press 3. Í or Æ to select previous or next sub-page. Reveal hidden information 5.5.6. You can hide or reveal hidden information on a page, such as solutions to riddles or puzzles. Press 1. ¤ on the remote control. Press 2. Ÿ to reveal or hide information.
EN-22 Create a surf list 5.6 You can store up to eight frequently watched channels in a surf list. Select a channel that you want to add to 1. the surf list. Press 2. SURF on the remote control to display the surf list. Surf 003 Press 3. Æ to add the selected channel to the surf list. Repeat steps 1 to 3 to add more channels 4. to the list. Press 5. STATUS/EXIT to exit. To view the a channel from the surf list Press 1. SURF to display the surf list. Press 2. Î or ï until you find the channel. To delete a channel from the surf list Press 1. SURF to display the surf list. Press 2. Î or ï until you find the channel that you wish to delete. Surf 003 006 008 001 005 009 010 002 Press 3. Æ to delete the channel. Surf 003 006 008 001 005 009 002 Repeat steps 1 to 3 to delete more 4. channels from the list. Press 5. STATUS/EXIT to exit. Use timers and child 5.7 lock This section describes how to switch the TV on or off at a specified time and to lock or unlock the TV. Child lock is useful in preventing your children from watching non-authorised content. Automatically switch the TV to 5.7.1. standby (Sleep timer) Sleep timer switches the TV to standby after a defined period of time. Press 1. MENU on the remote control and select Features > Timer > Sleep.
EN-23 ENFeatures Timer Child Lock Parental Lock Demo*Sleep Time Start Time Stop Time Channel Activate * Available in selected models Press 2. Æ to enter the Sleep menu. Press 3. Î or ï to select the sleep time. If set to zero minute the sleep timer is switched off. Press 4. OK to activate the Sleep timer. You can always switch off your TV earlier or reset the time during the countdown. Automatically switch the TV on 5.7.2. (Timer) Timer switches the TV to a specified channel at a specified time, from standby. Your TV must be in standby for the timer to work. Press 1. MENU on the remote control and select Features > Timer. Press 2. Æ to enter the Timer menu. Use 3. Î or ï, Í or Æ to select and enter the menu items to set a time, start time, stop time, channel, and frequency. Press 4. OK to confirm. Press 5. MENU to exit. Tip E To switch off the timer, select Off in Features > Timer > Activate. Lock TV channels (Parental Lock) 5.7.3. You can lock TV channels with a four digit code to prevent children from watching unauthorised content. To set or change a PIN code Press 1. MENU on the remote control and select Features > Parental Lock > Change code. Parental Lock Lock Channel Change Code Clear All Lock All Press 2. Æ to enter the code setup. Enter your code with the number keys. 3. The Features menu reappears with a message confirming that your code is created or changed. Tip E If you forget your code, enter ‘0711’ twice to override any existing codes. To enter the Parental Lock menu Press 1. MENU on the remote control and select Features > Parental Lock. Press 2. Æ to enter your code. Enter your code with the number keys. 3. Features Timer Child Lock Parental Lock Demo* Access Code* * * * * Available in selected models To lock or unlock all channels In the 1. Parental Lock menu, select Lock All or Clear All. Press 2. Æ to enter. Press 3. OK to confirm your choice.
EN-24 Parental Lock Lock Channel Change Code Clear All Lock AllYes Locked To lock one or more channels Press 1. MENU on the remote control and select Features > Parental Lock > Lock Channel. Press 2. Æ to enter. Press 3. Î or ï to select the channels you want to lock. Press 4. OK to lock the channel. A + symbol appears next to the channel number. To unlock, press OK again. Parental Lock Lock Channel Change Code Clear All Lock All001 002 003 004 005 +006 007 008 Repeat the above steps to lock or unlock 5. more channels. Lock the side controls (Child Lock) 5.7.4. You can lock the side controls of the TV to prevent children from changing channels. You can still change channel by using the remote control. Press 1. MENU on the remote control and select Features > Child Lock. Press 2. Î or ï to select On or Off. Features Timer Child Lock Parental Lock Demo*Off On * Available in selected models Press 3. OK to confirm. Press 4. MENU to exit. Use De 5.8 mo mode Demo mode is not available in all models. Consult your product specification to see whether your set has demo mode. The demo mode enables you to see the difference between the new video technologies available on your TV and conventional TVs without these features. Press 1. MENU on the remote control and select Features > Demo. Features Timer Child Lock Parental Lock DemoPixel Plus 3HD* Demo Pixel Plus 3HD*Off On * Varies according to models. Consult your product specification for details.
EN-25 EN Press 2. Î or ï to select On or Off. Press 3. OK to confirm. Press 4. MENU to exit. Alternatively, you can turn on or off the Demo mode with the DEMO button on the remote control. Press 1. DEMO on the remote control. The Demo mode turns on. Press 2. DEMO again to turn off a demo.
EN-26 6 Install channels This chapter describes how to install channels and tune channels. 6.1 Automatically install channels This section describes how to search and store channels automatically. Step 1 Select your menu language Press 1. MENU on the remote control and select Install > Language. Install Language Auto Store Manual Store Sort Name Fav. Program Press 2. Î or ï to select your language. Press 3. OK to confirm. Press 4. MENU to exit. Step 2 Install channels automatically Your TV searches and stores all available TV channels. Press 1. MENU on the remote control and select Install > Auto Store. Press 2. OK to start installation. The installation may take a few minutes. When the channel search is completed, 3. the TV will go to the first installed channel number. Press 4. MENU to exit. Tip E To rename, reorder or uninstall stored channels, see Section 6.3 Manage channels. Manually install channels 6.2 This section describes how to search and store analogue channels manually. Step 1 Select your system Note D Skip to Step 2 Search and store new TV channels if your system settings are correct. Press 1. MENU on the remote control and select Install > Manual Store. Install Language Auto Store Manual Store Sort Name Fav. ProgramColour System Sound System Search Channel Fine Tune Store Press 2. Æ to enter Manual Store. Press 3. Æ to enter Colour System. Press 4. Î or ï to select the appropriate system. Press 5. Í to return to the Manual Store menu. Press 6. ï to select Sound System. Press 7. Î or ï to select the appropriate system. Press 8. Í to return to the Manual Store menu. Step 2 Search and store new TV channels Press 1. MENU on the remote control and select Install > Manual Store > Search.
EN-27 ENManual Store Colour System Sound System Search Channel Fine Tune Store44MHz Press 2. Æ and the number keys on the remote control to manually enter the three-digit frequency. Press 3. Í when the new channel is found. Press 4. ï to select Channel. Press 5. Î or ï to select a channel number. Alternatively, use the number keys on the remote control to manually enter the channel number. Press 6. ï to store the new channel under a new channel number. Press 7. Æ to enter. Press 8. OK. Stored appears. Press 9. MENU to exit. Fine tune channels 6.2.1. You can fine tune channels when reception is poor. Press 1. MENU on the remote control and select Install > Manual Store > Fine Tune. Manual Store Colour System Sound System Search Channel. Fine Tune Store Press 2. Î or ï to adjust the frequency Press 3. Í when done. Select 4. Store to store the fine tuned channel under the current channel number. Press 5. Æ to enter. Press 6. OK. Stored appears. Press 7. MENU to exit. Manage channels 6.3 This section describes how to reorder, name, rename, or store favourite channels. Reorder channels 6.3.1. Press 1. MENU on the remote control and select Install > Sort. Press 2. Î or ï to select the channel you want to reorder. Install Language Auto Store Manual Store Sort Name Fav. Program001 002 003 004 005 006 007 008 Press 3. Æ to confirm. Press 4. Î or ï to select the channel you want to change to. Press 5. Í to confirm. Install Language Auto Store Manual Store Sort Name Fav. Program001 002 003 004 005 006 007 008
EN-28 Repeat the above steps to reorder more 6. channels. Press 7. MENU to exit. Name or rename channels 6.3.2. This feature is not available for external channels. Press 1. MENU on the remote control and select Install > Name. Press 2. Î or ï to select the channel you want to rename. Press 3. Æ to start the process. Press 4. Î or ï to select the characters or numbers from the list. You can use up to five characters or numbers. Press 5. Í to end the process. Repeat the above steps to name or rename 6. more channels. Press 7. MENU to exit. Store your favourite channels 6.3.3. You can specify a list of favourite channels. When you use the CH – / + keys of the remote control to access channels, only the favourite channels are accessed. To access channels that are not in your list of favourites, use the 0 to 9 numerical keys. Add or remove channels from your list of favourites Press 1. MENU on the remote control and select Install > Fav. Program. Main Picture Setting Advanced Picture Sound Ambilight* Features Install LocationLanguage Auto Store Manual Store Sort Name Fav. Program * Available in selected models Press the 2. Î or ï to select the channel number you want to add or remove from the list. Install Language Auto Store Manual Store Sort Name Fav. Program001 002 003 004 005 006 007 008 Press 3. Æ or OK to add or remove the channel from your list. When Dthe $ is displayed on the right of the menu, the channel is in the list of favourites. When the $ is not displayed on the right of the menu, the channel is not in the list of favourites. Install Language Auto Store Manual Store Sort Name Favourite Program001 002 003 004 005 006 007 008 Press the 4. Í key to return to the previous menu. Press 5. MENU to exit.