Philips 32pfl5403 User Manual

EN-29
EN
Change to Shop or Home  6.4 
mode
Press  1. MENU on the remote control and 
select Location.
Press  2. Æ to enter the Location menu.
Use  3. Î or ï to select the TV mode:
Shop • 
Sets smart settings to Vivid, ideal for 
a shop environment. The flexibility to 
change settings is limited.
Home • 
Gives home users the full flexibility to 
change all TV settings.
Press  4. OK to confirm.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
LocationHome
Shop
Press  5. MENU to exit.
 

EN-30
Connect devices
7 
Connection 
7.1   overview
HDMI 3HDMI 2
CVI-1 AV IN
AV  O U T
VIDEO
L
R
L Pr Pb Y
RL
AUDIO IN
SERV. C VGA
R L
R VIDEO
HDMI 1
TV ANTENNA75Ω
321
Back connectors Side connectors
4 5 6
7
8
9
10
Back connectors
AV  I N
1. 
Video and audio input cinch connectors for 
connection to devices.
AV OUT
2. 
Video output cinch connector and audio 
L/R connectors for connection to devices.
CVI-1
3. 
Component video (Y Pb Pr) and Audio 
L/R input connectors for DVD players, 
digital receivers,...

EN-31
EN
Select connection quality 7.2 
This section describes how you can enhance 
your audio visual experience by connecting 
your devices with the best possible connectors. 
After connecting your devices, be sure to 
enable them as described in Section 7.4 Setup 
devices.
  7.2.1.  HDMI - Highest quality 
HDMI produces the best audio visual quality 
possible. Both audio and video signals are 
combined in one HDMI cable, providing an 
uncompressed, digital interface between your 
TV and HDMI devices....

EN-32
Audio L/R cable - Red, White
  7.2.4.  Composite - Basic quality
Composite video provides basic analogue 
connectivity, usually combining a (yellow) video 
cinch cable with (red and white) Audio L/R 
cinch cable. Match the cable colours when 
connecting to the composite Video and Audio 
L/R input connectors on the side of the TV.
Composite audio/video cable- Yellow, red and 
white
Connect devices 7.3 
This section describes how to connect a 
selection of devices. Note that different types 
of...

EN-33
EN
DVD player/Home theatre system 7.3.3. 
Connect a component video and audio cables 
from the DVD player to CVI connectors on 
the back of your TV. 
HDMI 3HDMI 2
AV  I N AV  O U T
VIDEO
R RL AUDIO IN
SERV. CVGA
L
RVIDEO
HDMI 1
TV ANTENNA75X
Component 
video IN
DVD player/Home Theatre System
L
RPr Pb Y
CVI
L Pr Pb Y
RL
VCR 7.3.4. 
Connect a composite video cable from the 
player to the AV  I N connectors on the back of 
the TV. For recording of TV programmes on a 
VCR, connect to the AV OUT...

EN-34
A permanent game console or camcorder can 
be connected to an HDMI connector or AV  
IN (component) connectors at the back of the 
TV.
  7.3.7. Personal Computer
Caution   C
Before connecting the PC, set the PC 
monitor refresh rate to 60Hz. See Section 
11 Technical  data for a list of computer 
resolutions.
Connecting to the back of the TV (VGA)
Connect your PC to the VGA connector at  1. 
the back of the TV. 
Connect an audio cable from your PC to  2. 
AUDIO IN L/R connectors on the back of 
the...

EN-35
EN
Use your TV as PC  8 
monitor
Confi gure PC mode 8.1 
  1.  Connect your computer in Section 7.3.7 
Personal Computer.
Press  2. SOURCE on the remote control.
The list of sources appears.
Press  3. ï to select VG A and press OK to 
confirm.
Source list
TV
AV
SIDE AV
CVI
VGA
HDMI 1
HDMI 2
HDMI 3*
Side HDMI*
* Available in selected models
Note:    DSet your PC refresh rate to 60 Hz.
Picture settings in PC mode
Except for Horizontal Shift and Vertical Shift, 
all of the picture settings in PC mode...

EN-36
Use your TV in High  9 
Definition (HD) mode
The HD (High Definition) mode allows you to 
enjoy clearer and sharper pictures if you are 
using HD equipment that can produce high 
definition video signals.
Confi gure HD mode 9.1 
  1.  Connect your HD equipment as shown in 
the Quick Start Guide
Press  2. SOURCE on the remote control.
The list of sources appears.
Press  3. ï to select the correct HDMI and 
press OK to confirm.
Source list
TV
AV
SIDE AV
CVI
VGA
HDMI 1
HDMI 2
HDMI 3*
Side HDMI*
*...

EN-37
EN
Press the  6. MENU key to exit the menu.  
  9.3  Display in  native 1080 mode
Note:    DOnly TVs with the full HD  1080p can 
display in native 1080i mode.
When you connect HD equipment that 
supports a resolution of 1080i or 1080p, the 
Display (native 1080) feature is available in 
the Features menu. This feature allows you to 
watch the original HD format in  1080i mode. 
Press the 1.  MENU key to display the Main 
menu.
Press the  2. Î or ï key to select Features,  
and press the Æ or OK...

EN-38
Use Philips EasyLink 10 
Your TV is enabled for HDMI-CEC connections 
with other devices. The following descriptions 
apply to devices that are CEC-compliant and 
connected to your TV through an HDMI cable.
One-touch play
When you connect your TV to devices that 
support One-touch play, you can control your 
TV and the devices with one remote control. 
For example, when you press one-touch play 
on your DVD’s remote control, your Philips TV 
will automatically switch to the correct channel 
to show...