Philips 32pfl3205 User Manual

							29
Use one-touch play
1  Af ter enabling EasyLink, press play on 
your device. 
The TV automatically switches to the    »
correct source.
Use one-touch standby
1 Press  (Standby-On) on the T V ’s or 
device’s remote control. 
The TV and all connected HDMI    »
devices switch to standby.
Set TV speakers to EasyLink mode
When you play content from an EasyLink 
compliant home theater, the T V speakers are 
automatically muted.
1  Enable one-touch play and one-touch 
standby between your Easylink compliant 
devices by following the instructions 
in the previous section (see ‘Enable or 
disable EasyLink ’ on page 29).
2 Press  MENU.
3 Press  to select [Setup] > [Sound] 
> [TV speakers] > [Auto EasyLink].
The TV speakers are turned off    »
automatically when content from an 
Easylink compliant system is detected.
4 Press  to select [Setup] > [Sound] 
> [TV speakers] > [On] to disable 
system audio control and enable the T V 
speakers.
Note
To mute the T V speakers, select   •[TV 
speakers] > [Of f ].
Use Philips EasyLink
Your T V suppor ts Philips EasyLink, which 
uses the HDMI CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices 
that are connected through HDMI connectors 
can be controlled by a single remote control. 
Note
The EasyLink-compliant device must be   •switched on and selected as the source.
Philips does not guarantee 10 0%   •interoperability with all HDMI CEC devices.
EasyLink features
One-touch play 
When you connect your T V to devices that 
suppor t one-touch play, you can control your 
T V and the devices with one remote control.
One-touch standby
When you connect your T V to devices that 
suppor t standby, you can use your T V remote 
control to put your T V and all connected 
HDMI devices in standby mode.
System audio control
When you connect your T V to HDMI 
CEC compliant devices, your TV can 
switch automatically to play audio from the 
connected device. 
To use one-touch audio, you must map the 
audio input from the connected device to 
your T V. 
You can use the remote control from the 
connected device to adjust the volume.
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not   •intend to use it.
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Preferences] > 
[EasyLink].
3 Select [On] or [Of f ].
English
EN
 
						

							30
Use a Kensington lock
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
 
EN
 
						

							31
Tuner / Reception / 
Transmission
Aerial input: 75ohm coaxial (IEC75) • 
T V system: PAL I, B/G, D/K; SECAM B/G,  • 
D/K , L /L’ 
Video playback: NTSC , SECAM, PAL • 
Tuner Bands: Hyperband, S-channel, UHF,  • 
VHF
Remote control
Ty p e :  P F 0 2 E 0 9 B • 
Batteries: 2 x A A A (LR03 type) • 
Power
Mains power: 220 -240V, 50Hz • 
Standby power: < 1 W • 
Ambient temperature: 5 to 40 degrees  • 
Celsius
Supported TV  mounts
To mount the TV, purchase a Philips TV mount 
or a VESA-compatible TV mount. To prevent 
damage to cables and connectors, be sure to 
leave a clearance of at least 2.2 inches or 5.5cm 
from the back of the TV.
Warning
Follow all instructions provided with the T V   •mount. Koninklijke Philips Electronics N.V. 
bears no responsibility for improper TV 
mounting that results in accident, injury or 
damage.
TV screen 
size 
(inches)Required 
pitch (mm)Required mounting 
bolts
32 200 x 200 4 x M6 (≤ 10 mm)
42 300 x 200 4 x M6 (≤ 10 mm)
8 Product 
information
Product information is subject to change 
without notice. For detailed product 
information, go to www.philips.com/suppor t.
Supported display resolutions
Computer formats
Resolution - refresh rate: • 
640 x 480 - 60Hz • 
800 x 600 - 60Hz • 
1024 x 768 - 60Hz • 
1280 x 768 - 60Hz • 
1280 x 1024 - 60 Hz • 
1360 x 768 - 60Hz • 
1440 x 900 - 60Hz  • 
1680 x 1050 - 60Hz • 
Video formats
Resolution - refresh rate: • 
480i - 60Hz • 
480p - 60Hz • 
576i - 50Hz • 
576p - 50Hz • 
720p - 50Hz, 60Hz • 
1080i - 50Hz, 60Hz • 
1080p - 24Hz, 25Hz, 30Hz, 50Hz,  • 
60Hz.
Multimedia
Suppor ted storage device: USB (Only  • 
FAT or FAT 32 USB storage devices are 
suppor ted) 
Suppor ted multimedia file formats: • 
Images: JPEG • 
Audio: MP3 • 
English
EN
 
						

							32
Product specification
Design and specifications are subject to change 
without notice.
  
32PFL3605/32PFL3205
Without T V stand
• 
Dimension ( WxHxD): 795.6 x 508.3 • 
x 93 (mm)
Weight: 8.3 kg
• 
With T V stand• 
Dimension ( WxHxD): 795.6 x 556.6 • 
x 220.8 (mm)
Weight: 9.4 kg
• 
42PFL3605 Without T V stand
• 
Dimension ( WxHxD): 1018.5 x • 
635.7 x 83 (mm)
Weight: 11.5 kg
• 
With T V stand• 
Dimension ( WxHxD): 1018.5 x 683 • 
x 235.8 (mm)
Weight: 12.8 kg
• 
EN
 
						

							33
When turning the TV on / off / to standby, you 
hear a creaking sound from the TV chassis:
No action is required. The creaking sound    •
is normal expansion and contraction of 
the T V as it cools down and warms up. 
This does not impact per formance.
Cannot remove ‘e-sticker’ banner displayed on 
the TV.
To remove the logos and images, set the    •
location of your T V to home.
1. Press 
 MENU.
2. Select [Setup] > [Installation] > 
[Preferences] > [Location].
3. Select [Home] and press OK. 
TV channel issues
Previously installed channels do not appear in 
the channel list:
Check that the correct channel list is    •
selected.
Some channels are not automatically installed 
on my TV:
During installation, make sure that    •
you select the countr y where you are 
installing the T V (see ‘Step 2 Select your 
countr y’ on page 22).
9 Troubleshooting
This section describes commonly encountered 
issues and accompanying solutions.
General TV  issues
The TV does not switch on:
Disconnect the power cable from the    •
power outlet. Wait for one minute then 
reconnect it.
Check that the power cable is securely    •
connected.
The remote control is not working properly:
Check that the remote control batteries    •
are correctly inser ted according to the 
+/- orientation.
Replace the remote control batteries if    •
they are flat or weak.
Clean the remote control and T V sensor    •
lens.
The standby light on the TV blinks red:
Disconnect the power cable from the    •
power outlet. Wait until the T V cools 
down before reconnecting the power 
cable. If the blinking reoccurs, contact 
Philips Consumer Care. 
You forgot the code to unlock the TV lock 
feature
Enter ‘8888’.   •
The TV menu is in the wrong language.
Change the T V menu to your preferred    •
language.
English
EN
 
						

							34
Sound issues
There is a picture but sound quality is poor:
Note
If no audio signal is detected, the T V   •automatically switches the audio output off 
— this does not indicate malfunction.
Check that all cables are properly    •
connected.
Check that the volume is not set to 0.   •
Check that the sound is not muted.   •
There is a picture but the sound quality is 
poor:
Check that the sound settings are    •
correctly set.
There is a picture but sound comes from one 
speaker only:
Verify that sound balance is set to the    •
centre.
HDMI connection issues
There are problems with HDMI devices:
Note that HDCP (High-bandwidth Digital    •
Content Protection) suppor t can delay 
the time taken for a T V to display content 
from a HDMI device. 
If the T V does not recognise the HDMI    •
device and no picture is displayed, tr y 
switching the source from one device to 
another and back again.
If there are intermittent sound    •
disruptions, check that output settings 
from the HDMI device are correct.
If you use an HDMI-to-DVI adapter    •
or HDMI-to-DVI cable, check that an 
additional audio cable is connected to 
AUDIO IN (mini-jack only).
Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly    •
connected to the T V.
Check that the correct device is selected    •
as the T V source.
There is sound but no picture:
Check that the picture settings are    •
correctly set.
There is poor TV reception from an antenna 
connection:
Check that the antenna is properly    •
connected to the T V.
Loudspeakers, unear thed audio devices,    •
neon lights, high buildings and other large 
objects can influence reception quality. 
If possible, tr y to improve the reception 
quality by changing the antenna direction 
or moving devices away from the T V.
If reception on only one channel is poor,    •
fine tune this channel.
There is poor picture quality from connected 
devices:
Check that the devices are connected    •
properly.
Check that the picture settings are    •
correctly set. 
The TV did not save your picture settings:
Check that the TV location is set to the  • 
home setting. This mode offers you the 
flexibility to change and save settings.
The picture does not fit the screen; it is too 
big or too small:
Tr y using a different picture format.   •
The picture position is incorrect:
Picture signals from some devices may    •
not fit the screen correctly. Check the 
signal output of the device.
EN
 
						

							35
Computer connection issues
The computer display on the TV is not stable:
Check that your PC uses the suppor ted    •
resolution and refresh rate.
Set the TV picture format to unscaled.   •
Contact us
If you cannot resolve your problem, refer to the 
FAQs for this T V at w w w.philips.com/suppor t.
 
  
If the problem remains unresolved, contact 
Philips Consumer Care in your countr y as 
listed in this user manual.
Warning
Do not at tempt to repair the T V yourself. This   •may cause severe injur y, irreparable damage to 
your T V or void your warranty.
Note
Make a note of your T V model and serial   •number before you contact Philips. These 
numbers are printed on the back of the T V 
and on the packaging.
English
EN
 
						

							36
connectors 
back connectors  25
HDMI 34, 25
over view 25
side connectors  27
USB 18
country 22
D
decoder 21
default settings 21
demo 21
devices 10
devices 
add to home menu  11
connect 25
remove 11
rename 11
watch 10
digital services 
teletex t 10, 14
disconnect USB 20
display 
resolution 31
dispose 5
E
EasyLink 
disable 29
enable 29
one-touch play  29
one-touch standby  29
system audio control  29
end of life 5
environmental care 5
e-sticker 20
F
factory settings 21
favourites list 
create list  15
view list  15
fine-tune channels 23
10 Index
A
analogue 
fine-tune 23
antenna 25
B
back connectors 25
batteries 31, 5
bracket for wall mount 31
C
care 5
channel decoder 21
channel grid 9
channels 
favourites list  15
fine-tune 23
grid 9
install 
automatic 22
manual 22
list 15
lock  17
rename 24
reorder / rearrange  24
skip channels  23
switch 9
troubleshooting 33
tune  23
child lock 
lock channels  18
lock connected devices  17
PIN code  17
clock 
set 16
computer 
connect 35, 28
display resolution  31
connect 
antenna 25
PC 35, 28
EN
 
						

							37
O
on timer  16
one-touch play 29
one-touch standby 29
P
PC 
connect 28, 35
resolution 31
picture format 
change 13
troubleshooting 34
picture settings 12
PIN code 17
pixel plus link 20
power 31
power consumption 31
preferences 20
product specifications 31
R
rearrange channels 24
reception 34
recycle 5
register product 7
remote control 
batteries 31, 5
over view 7
technical specifications  31
rename channels 24
reorder channels 24
resolution 31
restore default 21
H
HDMI  34, 25, 27
home mode 20
I
install channels 
automatic 22
manual 22
K
Kensington lock 30
L
language 
menu 22
troubleshoot 33
list 
favourites list  15
location 
countr y 22
home or shop  20
lock 
Kensing ton lock  30
lock channels  18
lock connected devices  17
PIN code  17
M
menu 
language 22
main menu  11
teletex t 14
MHEG teletext 10
MPEG artifact reduction 12
multimedia 31
music 
USB 19
with slideshow  19
mute TV speakers 29
English
EN
 
						

							38
U
USB 
disconnect USB  20
listen to music  19
update sof tware  20
view photos  18
V
video format 
technical specifications  31
volume 
adjust 10
automatic levelling  14
delta 14
mute 10, 29
W
wall mount 4, 31
S
safety 4
screen care 5
settings 
picture 12
sound 14
shop mode 20
side connectors 27
skip channels 23
slideshow 
view 19
with music  19
smart picture 12
smart settings 12 , 14
smart sound 14
software 
version 20
sound settings 14
specifications 31
standby 9
subpages in teletext 15
switch 
channels 9
on and off  9
source 10
T
Table of Pages 15
technical specifications 31
teletext 
features 14
menu 14
subpages 15
Table of Pages  15
use 10
timer 
on timer   17
sleep timer  16
standby 16
transmission 31, 33
transporting 4
troubleshooting 33
TV lock 
lock channels  18
lock connected devices  17
PIN code  17
TV overview 7
EN