Philips 32pfl3205 User Manual

							19
Music settings
When listening to music, press  OPTIONS 
to access one of the following music settings.
• [Start playback] / [Stop playback]: Star ts 
or stops the music.
• [Play mode]: 
• [Play once]: Disables repeat play and 
plays a song once.
• [Repeat]: Repeats a song.
• [Shuffle]: Plays songs randomly.
• [Show info]: Displays the file name.
• [Sound]: Adjusts the sound setting.
• [TV speakers]: Sets the T V speakers 
on or off.(Only available if EasyLink is 
switched on.)
View a slideshow with music
You can view a picture slide show with 
background music.
1  Select an album of songs.
2 Press OK.
3 Press  BACK to return to the USB 
content browser.
4  Select an album of pictures.
5 Press OK.
Disconnect a USB storage device
Caution
Follow this procedure to avoid damage to your   •USB storage device.
1 Press  BACK to exit the USB browser.
2  Wait for five seconds then disconnect the 
USB storage device.
Change slide show settings
1  When viewing a slide show, press  
 OPTIONS.
The slide show options menu appears.   »
2 Press  to select one of the following.
• [Start Slideshow] / [Stop Slideshow]: 
Star ts or stops a slide show.
• [Slideshow transitions]: Sets the 
transition from one picture to the 
next.
• [Slideshow frequency]: Sets the 
amount of time that a picture is 
shown.
• [Rotate image]: Rotates a picture.
• [Show info]: Displays the picture 
name, date, size and nex t picture in 
the slide show.
3 Press OK to confirm your setting.
Note
  •[Rotate image] and [Show info] appear only 
when you press OK to pause the slideshow.
Listen to music
1  In USB browser view, select [MUSIC] and 
press 
 to enter.
2 Press  to select a music track or 
album.
3 Press OK to play the selected music.
Button Function
OKPause, resume play or stop 
playback.
 / Go to the previous or nex t 
music.
English
EN
 
						

							20
Change TV  preferences
Use the preferences menu to customise your 
TV settings.
1 Press  MENU.
2 Select [Setup] > [Installation] > 
[Preferences].
• [Location]: Optimises T V settings for 
your location - home or shop.
• [Volume bar]: Displays the volume 
bar when you adjust the volume.
• [EasyLink]: Enables one-touch play 
and one-touch standby between 
EasyLink-compliant devices. 
• [Pixel Plus Link]: Overrides the 
settings of connected devices and 
uses the settings of the TV.(Only 
available if EasyLink is switched on.)
• [E-sticker]: For shop mode only. Sets 
the location of the e-sticker.
3 Press  to select your preference.
4 Press OK.
5 Press  MENU to exit.
Update the TV software
Philips continuously tries to improve its 
products and we recommend that you update 
the TV software when updates are available. 
Check www.philips.com/suppor t for availability.
Check the current software version
1 Press  MENU. 
2 Press  to select [Setup] > 
[Software update] > [Current software].
The TV displays the current software    »
information.
Download the software
1  On your PC , open a web browser and go 
to www.philips.com/support.
2  Download the latest sof tware upgrade 
file to your PC .
3  Decompress the ZIP-file.
4  Copy the autorun.upg file to the root 
director y of the USB device.
Update using a USB device
Connect your USB device to the USB por t at 
the side of your T V.
1  If the sof tware update screen does not 
appear automatically, select [Setup] > 
[Software update] > [Local updates].
2 Press OK to update the T V sof tware 
manually.
3  Follow the on-screen instructions to 
complete the update.
Note
The T V restar ts af ter the sof tware update is   •complete.
EN
 
						

							21
Start a TV demo
You can use demonstrations to better 
understand the features of your T V. Some 
demos are not available on cer tain models. 
Available demos are displayed in the menu list.
1 Press DEMO on the remote control.
2 Press  to select a demo and press OK 
to view it.
3 Press  BACK to exit.
Reset the TV to factory 
settings
You can restore the default picture and sound 
settings of your TV. The channel installation 
settings remain the same.
1 Press  MENU.
2 Select [Setup] > [Installation] >  
[Factory settings].
3 Press  to enter [Factory settings].
4 Select [Reset] to star t resetting.
5 Press OK.
6 Press  MENU to exit.
Access decoder channel
You can map channels provided through a 
decoder or descrambler to your TV channel 
selection. In this way, you can select these 
channels by using the RC of your TV. The 
decoder or a descrambler must be connected 
to EXT1 (SCART). 
Set decoder channel
Map channels from a decoder or descrambler.
1 Press  MENU.
2 Select [Setup] > [Installation] > 
[Decoder].
3 Press  to enter [Decoder] menu.
4 Press  to select [Channel], then press 
 to enter.
5  Select one channel to map to the 
decoder / descrambler channel and press 
OK to confirm.
6 Select [Status], then press  to enter.
7 Select [EXT 1] (SCART ) the connector 
used by the decoder / descrambler.
8 Press OK.
9 Press  MENU to exit.
Note
Select   •[None] if you do not want to map to 
the decoder / descrambler channel.
English
EN
 
						

							22
5 Select [Start], then press OK to re-install 
channels. 
To stop searching, select  • [Stop] and 
press OK.
6 Press  MENU to exit.
Manually install channels
This section describes how to search and store 
analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your system set tings are   •correct.
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel installation] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Select [System], then press OK to enter.
4 Press  to select your countr y or 
region.
5 Press OK to confirm.
6 Press  MENU to exit.
Step 2 Search and store new TV 
channels
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel installation] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select [Search], then press  
to enter.
4 Press Numeric buttons to manually enter 
the three-digit frequency.
6 Install channels
The first time you set up your TV, you are 
prompted to select a menu language and to 
install TV and digital radio channels (if available). 
This chapter provides instructions on how to 
re-install and fine tune channels.
Automatically install channels
This section describes how to search and store 
channels automatically.
Step 1 Select your menu language
Note
Skip this step if your language set tings are   •correct.
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Menu language].
3 Press  to enter [Menu language].
4 Press  to select a language.
5 Press OK to confirm.
6 Press  MENU to exit.
Step 2 Select your country
Select the countr y where you are installing the 
T V. The available channels for the countr y are 
installed on the TV.
1 Press  MENU.
2 Select [Setup] > [Installation] > 
[Channel installation] >  
[Channel assistant].
The    »[Channel assistant] menu appears.
3 Select [Yes], then press OK to enter.
4 Press  to select your countr y, then 
press 
 to go to the nex t step.
EN
 
						

							23
Skip channels
1  When watching T V, switch to the channel 
you want to skip.
2 Press  MENU.
3 Press  to select [Setup] > 
[Installation] > [Channel installation] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
4 Press  to select [Skip channel], then 
press 
 to enter.
5 Press  to select [Yes], then press OK 
to skip current channel.
The selected channel is skipped when    »
you press P +/- on your remote 
control or view from the channel grid.
6  Repeat the previous steps to skip more 
channels.
Tip
Press the   •Numeric buttons on the remote 
control to access the skipped channel.
To access the skipped channel, repeat steps 
  •1-5 and select [No] to restore.
5 Press OK to begin search.
If a channel is unavailable at the    »
selected frequency, the system searches 
for the next available channel.
6 Press  BACK when the new channel is 
found.
7 Press  to select [Store as new 
channel] to store the new channel under 
a new channel number.
8 Press  to enter [Store as new channel].
9 Select [OK], then press OK to store the 
new channel.
10 Press  MENU to exit.
Step 3 Fine-tune analogue channels
1 Press  MENU.
2  Press to select [Setup] > [Installation] > 
[Channel installation] >  
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select [Fine-tune], then 
press 
 to enter.
4 Press  to adjust frequency.
5 Press OK to confirm.
6 Press  to select [Store current 
channel] to store channel number.
7 Press  to enter [Store current channel].
8 Select [OK], then press OK to store 
current channel.
9 Press  MENU to exit.
English
EN
 
						

							24
Rearrange channels
After you install channels, you can rearrange the 
order in which they appear.
1  When watching T V, press OK to display 
the channel grid.
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press  to select [Reorder], then press 
OK.
4  Select the channel to rearrange, then 
press OK.
The selected channel is highlighted.   »
5 Press  to move the highlighted 
channel to the desired location, then 
press OK.
6 Press  OPTIONS.
  »[Done reordering] appears on the 
screen.
7 Press OK to confirm.
8 Press  BACK to exit the channel grid.
Rename channels
You can rename channels. The name appears 
when you select the channel.
1  When watching T V, press OK to display 
the channel grid.
2  Select the channel to rename.
3 Press  OPTIONS.
The channel options menu appears.   »
4 Press  to select [Rename channel], 
then press OK.
A text input box appears.   »
5 Press  to select characters.
6 Press OK to confirm each character.
7 Select [Done], then press OK to finish 
renaming channels.
Tip
The device name can be up to six characters   •long.
Press   •[Aa] to change an uppercase let ter to a 
lowercase let ter and vice versa.
EN
 
						

							25
a TV ANTENNA
Signal input from an antenna, cable or 
satellite.
  
b  EXT 1 and EXT 2 (CVBS and RGB)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
  
TV ANTENNA
7 Connect devices
This section describes how to connect devices 
with different connectors. Examples are 
provided in the Quick Star t.
Note
You can use different types of connectors to   •connect a device to your TV.
Back connector
  
English
EN
 
						

							26
f HDMI 1
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
  
Connections via DVI or VGA require an 
additional audio cable (see ‘Connect a 
computer’ on page 28).
c  EXT 3 (Y Pb Pr and AUDIO L/R) 
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
  
d  PC IN (VGA and AUDIO IN) 
Audio and video input from a computer.
  
e SERV. U
For use by ser vice personnel only.
VGA
VGA
AUDIO INLEFT/RIGHT
VGA/DVI
EN
 
						

							27
b VIDEO
Composite video input from analogue 
devices such as VCRs.
  
c HDMI
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
  
d USB
Data input from USB storage devices.
  
Side connector
  
a AUDIO L/R
Audio input from analogue devices 
connected to VIDEO.
  
English
EN
 
						

							28
• HDMI cable and HDMI-DVI adaptor
  
• VGA cable
  
DVI
AUDIO INLEFT/RIGHT
VGA/DVI
VGA
VGA
AUDIO INLEFT/RIGHT
VGA/DVI
Connect a computer
Before you connect a computer to the TV
Set the screen refresh rate on your  • 
computer to 60Hz.
Select a suppor ted screen resolution on  • 
your computer.
Connect a computer with one of the 
following connectors:
Note
Connections via DVI or VGA require an   •additional audio cable.
• HDMI cable
  
• DVI - HDMI cable
  
DVI
AUDIO INLEFT/RIGHT
VGA/DVI
EN