Philips 273e3lsb User Manual

							19
273E3L
Power 
On mode27W (typical)
Energy Consumption
(EnergyStar 5.0 test method)
AC Input Voltage at 
100VAC +/-5VAC, 
50Hz +/- 5Hz
AC Input Voltage at 
115VAC +/-5VAC, 
50Hz +/- 5Hz
AC Input Voltage at 
230VAC +/-5VAC, 
50Hz +/ -5Hz
Normal Operation (typcial)19.6W19.5W19.6W
Sleep(Standby)0.5W0.5W0.5W
Off0.5W0.5W0.5W
Heat Dissipation*AC Input Voltage at 
100VAC +/-5VAC, 
50Hz +/ -5Hz
AC Input Voltage at 
115VAC +/-5VAC, 
50Hz +/ -5Hz
AC Input Voltage at 
230VAC +/-5VAC, 
50Hz +/ -5Hz
Normal Operation66.89BTU/hr66.55BTU/hr66.89BTU/hr 
Sleep(Standby)1.71BTU/hr1.71BTU/hr1.71BTU/hr
Off1.71BTU/hr1.71BTU/hr1.71BTU/hr
Power LED indicatorOn  mode: White,  Standby/Sleep: White(Blinking)
Power SupplyBurn-in,100-240VAC,50-60Hz
273E3LH
Power 
On mode
						

							20
Dimension
Product with stand (WxHxD) 642x440x227mm
Product without stand 
(WxHxD)
642x391x64mm
Box dimension (WxHxD)700x138x525mm
Weight
Product with stand8.2kg
Product without stand6.5kg
Product with packaging8.82kg
Operating Condition
Temperature range (operation)0°C to 40 °C
Temperature range (Non-
operation)
-20°C to 60°C
Relative humidity20% to 80%
Altitudeoperation: + 12,000 ft (3,658 m)
Non-operation: + 40,000 ft (12,192 m)
MTBF30,000hrs
Environmental
ROHSYES
EPEATSilver. (www.epeat.net)
Packaging100% recyclable
Specific SubstancesPVC/BFR Free3 for User Accessible Par ts (Excluding Cables and 
Adaptors)
Compliance and standards
Regulator y ApprovalsCE Mark, FCC Class B, SEMKO, TÜV/ 
GS, TÜV Ergo, UL/cUL, Energy star 5.0, TCO 5.1
Cabinet
ColorBlack/Black
FinishTexture/Texture
 Note
1. EPEAT Gold or Silver is valid only where Philips registers the product Please visit www. epeat.net for 
registration status in your countr y.
2.  This data is subject to change without notice. Go to www.philips.com/suppor t to download the latest 
version of leaflet.
3.  This monitor is brominated flame retardant and polyvinyl chloride-free (PVC/BFR free) for all user 
accessible par ts (excluding cables and adaptors). Organobromine compounds in the form of flame 
retardants must not be used in those por tions equal to or greater than 0.09%(900ppm maximum 
of Bromine) and organobromine compounds in the form of polyvinyl chloride or polyvinyl chloride 
congeners must not be used in those por tions equal to or greater than 0.1% (1000ppm maximum of 
Chlorine).

00170011  
						

							21
4.1 Resolution & Preset Modes
 Maximum Resolution
For 273E3L/273E3LH
1920 x 1080 at 60 Hz (analog input)
1920 x 1080 at 60 Hz (digital input)
 Recommended Resolution
For 273E3L/273E3LH
1920 x 1080 at 60 Hz (digital input)
H. freq (kHz)ResolutionV. freq (Hz)
31.47720x40070.09
31.47640x48059.94
35.00640x48066.67
37.86640x48072.81
37.50640x48075.00
37.88800x60060.32
46.88800x60075.00
48.361024x76860.00
60.021024x76875.03
63.891280x102460.02
79.981280x102475.03
55.941440x90059.89
70.641440x90074.98
65.291680x105059.95
67.501920x108060.00

00170011  
						

							22
5. Power  Management
5.1  Automatic PowerSaving
If you have VESA DPM compliance display card 
or software installed in your PC, the monitor can 
automatically reduce its power consumption when 
not in use. If an input from a keyboard, mouse or 
other input device is detected, the monitor will 
'wake up' automatically. The following table shows 
the power consumption and signaling of this 
automatic power saving feature:
273E3L
Power Management DefinitionVESA ModeVideoH-sync V-syncPower UsedLED color 
ActiveONYe sYe s
						

							23
6. Regulatory Information
Lead-free Product
Lead free display promotes 
environmentally sound recover y and 
disposal of waste from electrical and 
electronic equipment. Toxic substances 
like Lead has been eliminated and compliance 
with European community’s stringent RoHs 
directive mandating restrictions on hazardous 
substances in electrical and electronic equipment 
have been adhered to in order to make Philips 
monitors safe to use throughout its life cycle.
Congratulations! 
This display is designed for both you and the 
planet!
The display you have just purchased 
carries the TCO Cer tified label. This 
ensures that your display is designed, 
manufactured and tested according 
to some of the strictest quality and 
environmental requirements in 
the world. This makes for a high performance 
product, designed with the user in focus that also 
minimizes the impact on the climate and our 
natural environment.
TCO Cer tified is a third par ty verified program, 
where ever y product model is tested by an 
accredited impar tial test laborator y. TCO 
Cer tified represents one of the toughest 
cer tifications for displays worldwide.
Some of the Usability features of the TCO 
Certified for displays: 
•	Visual ergonomics for good image quality 
is tested to ensure top performance and 
reduce sight and strain problems. Impor tant 
parameters are luminance, contrast, 
resolution, black level, gamma cur ve, colour 
and luminance uniformity and colour 
rendering
•	Products are tested according to rigorous 
safety standards at impar tial laboratories 
•	Electric and magnetic fields emissions as low 
as normal household background levels
•	Low acoustic noise emissions (when 
applicable)
Some of the Environmental features of the TCO 
Certified for displays:  
•	The brand owner demonstrates corporate 
social responsibility and has a cer tified 
environmental management system (EMAS or 
ISO 14001) 
•	Ver y low energy consumption both in on- 
and standby mode minimize climate impact 
•	Restrictions on chlorinated and brominated 
flame retardants, plasticizers, plastics and heavy 
metals such as cadmium, mercur y and lead 
(RoHS compliance) 
•	Both product and product packaging is 
prepared for recycling 
•	The brand owner offers take-back options 
The requirements can be downloaded from our 
web site. The requirements included in this label 
have been developed by TCO Development in 
co-operation with scientists, exper ts, users as well 
as manufacturers all over the world. Since the end 
of the 1980s TCO has been involved in influencing 
the development of IT equipment in a more user-
friendly direction. Our labeling system star ted with 
displays in 1992 and is now requested by users 
and IT-manufacturers all over the world. About 
50% of all displays worldwide are TCO cer tified. 
 
For more information, please visit  
www.tcodevelopment.com 
 TCOFF1058 TCO  Document, Ver.  2.1
Technology for you and the planet

6. Regulatory Infomation  
						

							24
•	 2005/32/EC	(EuP	Directive,	EC	No.			
 1275/2008 mplementing Directive for  
 Standby and Off mode power consumption)  
 and is produced by a manufacturing   
 organization on ISO9000 level. 
•	 The	product	also	comply	with	the	following		
 standards 
•	 ISO9241-307:2008	(Ergonomic	requirement, 		
 Analysis and compliance test methods for  
 electronic visual displays)  
•	 GS	EK1-2000:2009	(GS	mark	requirement)		
•	 prEN50279:1998	(Low	Frequency	Electric		
 and Magnetic fields for Visual Display) 
•	 MPR-II	(MPR:1990:8/1990:10	Low	Frequency		
 Electric and Magnetic fields) 
•	 TCO	Displays	5.0	(Requirement	for
 Environment Labeling of Ergonomics,  
 Energy,  Ecology and Emission, TCO: Swedish  
 Confederation of Professional Employees)  
 for TCO  versions 
Energy Star Declaration (www.energystar.gov)
“The EPEAT (Electronic Product 
Environmental  Assessment Tool) 
program evaluates computer 
desktops, laptops, and monitors 
based on 51 environmental criteria 
developed through an extensive stakeholder 
consensus process suppor ted by US EPA.
EPEAT system helps purchasers in the public 
and private sectors evaluate, compare and select 
desktop computers, notebooks and monitors 
based on their environmental attributes. EPEAT 
also provides a clear and consistent set of 
performance criteria for the design of products, 
and provides an oppor tunity for manufacturers to 
secure market recognition for effor ts to reduce 
the environmental impact of its products.”
Benefits of EPEAT
Reduce use of primar y materials
Reduce use of toxic materials
Avoid the disposal of hazardous waste EPEAT’S 
requirement that all registered products meet 
ENERGY STAR’s energy efficiency specifications, 
means that these products will consume less 
energy throughout their life.
CE Declaration of Conformity
This product is in conformity with the following 
standards 
•	 EN60950-1:2006	(Safety	requirement	of		
 Information Technology  Equipment) 
•	 EN55022:2006	(Radio	Disturbance		 	
 requirement of Information Technology  
 Equipment) 
•	 EN55024:1998+A1:2001+A2:2003			
 (Immunity requirement of Information  
  Technology  Equipment) 
•	 EN61000-3-2:2006	(Limits	for	Harmonic		
 Current Emission) 
•	 EN61000-3-3:1995+A1:2001+A2:2005		
 (Limitation of Voltage Fluctuation and Flicker)
 following provisions of directives applicable
•	 2006/95/EC	(Low	 Voltage	Directive)	
•	 2004/108/EC	(EMC	Directive)
 
EPEAT (www.epeat.net)
As an ENERGY STAR® Par tner, 
we have determined that this 
product meets the ENERGY STAR® 
guidelines for energy efficiency.
 Note
We recommend you switch off the monitor 
when it is not in use for a long time.

6. Regulatory Infomation  
						

							25
Federal Communications Commission (FCC) 
Notice (U.S. Only)
 This equipment has been tested and found  
  to comply with the limits for a Class B digital  
 device, pursuant to Par t 15 of the FCC 
 Rules. These limits are designed to    
 provide reasonable protection against  
 harmful interference in a residential    
 installation. This equipment generates, uses  
 and can radiate radio frequency energy and,  
 if not installed and used in accordance with
 the instructions, may cause harmful    
 interference to radio communications.  
 However, there is no guarantee that   
 interference will not occur in a par ticular  
 installation. If this equipment does cause  
 harmful interference to radio or television  
 reception, which can be determined by  
 turning the equipment off and on, the user 
 is encouraged to tr y to correct the    
 interference by one or more of the following  
 measures:
•	 Reorient	or	relocate	the	receiving	antenna. 	
•	 Increase	the	separation	between	the		
 equipment and receiver. 
•	 Connect	the	equipment	into	an	 outlet	on		
 a circuit different from that to which the  
 receiver is connected. 
•	 Consult	the	dealer	or	an	experienced	radio/	
 TV technician for help.
 Changes or modifications not expressly  
  approved by the par ty responsible for  
 compliance could void the user's authority  
 to operate the equipment.
Use only RF shielded cable that was supplied with 
the monitor when connecting this monitor to a 
computer device. 
To prevent damage which may result in fire or 
shock hazard, do not expose this appliance to rain 
or excessive moisture. 
THIS CLASS B DIGITAL APPARATUS MEETS 
ALL REQUIREMENTS OF THE CANADIAN 
INTERFERENCE-CAUSING EQUIPMENT 
REGULATIONS.
FCC Declaration of Conformity
Declaration of Conformity for Products Marked 
with FCC Logo, 
United States Only
This device complies with Par t 15 of the FCC 
Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any 
interference received, including interference that 
may cause undesired operation. 

6. Regulatory Infomation  
						

							26
Commission Federale de la Communication 
(FCC Declaration)
 Cet équipement a été testé et déclaré  
  conforme auxlimites des appareils    
 numériques de class B,aux termes de  
 l'ar ticle 15 Des règles de la FCC . Ces limites  
 sont conçues de façon à fourir une  
 protection raisonnable contre les    
 interférences nuisibles dans le cadre   
 d'une installation résidentielle. 
 CET appareil produit, utilise et peut émettre  
 des hyperfréquences qui, si l'appareil  
 n'est pas installé et utilisé selon les consignes  
 données, peuvent causer des interférences  
 nuisibles aux communications radio. 
 Cependant, rien ne peut garantir l'absence  
 d'interférences dans le cadre d'une    
 installation par ticulière. Si cet appareil est la  
 cause d'interférences nuisibles pour la  
 réception des signaux de radio ou de  
 télévision, ce qui peut être décelé en fermant  
 l'équipement, puis en le remettant en  
 fonction, l'utilisateur pourrait essayer de  
 corriger la situation en prenant les mesures  
 suivantes:
•	 Réorienter	ou	déplacer	l'antenne 	de		
 réception. 
•	 Augmenter	la	distance	entre	l'équipement	et		
 le récepteur. 
•	 Brancher	l'équipement	sur	un	autre	circuit		
 que celui utilisé par le récepteur. 
•	 Demander	l'aide	du	marchand	ou	d'un		
 technicien chevronné en radio/télévision.
 Toutes modifications n'ayant pas reçu  
  l'approbation des ser vices compétents en  
 matière de conformité est susceptible  
 d'interdire à l'utilisateur l'usage du présent  
 équipement.
N'utiliser que des câbles RF armés pour les 
connections avec des ordinateurs ou 
périphériques. 
CET APPAREIL NUMERIQUE DE LA CLASSE 
B RESPECTE TOUTES LES EXIGENCES DU 
REGLEMENT SUR LE MATERIEL BROUILLEUR 
DU CANADA. 
EN 55022 Compliance (Czech Republic Only)

6. Regulatory Infomation  
						

							27
Polish Center for Testing and Certification 
Notice
The equipment should draw power from a socket 
with an attached protection circuit (a three-
prong socket). All equipment that works together 
(computer, monitor, printer, and so on) should 
have the same power supply source.
The phasing conductor of the room's electrical 
installation should have a reser ve shor t-circuit 
protection device in the form of a fuse with a 
nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the 
power supply cable must be removed from the 
power supply socket, which should be located 
near the equipment and easily accessible.
A protection mark "B" confirms that the 
equipment is in compliance with the protection 
usage requirements of standards PN-93/T-42107 
and PN-89/E-06251.
North Europe (Nordic Countries) Information
Placering/Ventilation 
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE 
OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU 
STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation ADVARSEL: 
SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. 
Paikka/Ilmankier to VAROITUS: 
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA  HELPOSTI IRROTTAA PISTORASIASTA. 
Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.
BSMI Notice (Taiwan Only)

6. Regulatory Infomation  
						

							28
China RoHS 
The People's Republic of China released a 
regulation called "Management Methods for 
Controlling Pollution by Electronic Information 
Products" or commonly referred to as China 
RoHS. All products including CRT and Monitor 
which are produced and sold for China market 
have to meet China RoHS request.
环保使用期限 
此标识指期限(十年),电子信息产品中含有的
有毒有害物质或元素在正常使用的条件下不
会发生外泄或突变, 电子信息产品用户使用该
电子信息产品不会对环境造成严重污染或对
其人身、 财产造成严重损害的期限．
Ergonomie Hinweis (nur Deutschland)
Der von uns geliefer te Farbmonitor entspricht den 
in der "Verordnung über den Schutz vor Schäden 
durch Röntgenstrahlen" festgelegten Vorschriften. 
Auf der Rückwand des Gerätes befindet sich 
ein Aufkleber, der auf die Unbedenklichkeit der 
Inbetriebnahme hinweist, da die Vorschriften über 
die	Bauar t	von	Störstrahlern	nach	Anlage	III	¤	5	
Abs. 4 der Röntgenverordnung erfüllt sind. 
Damit Ihr Monitor immer den in der Zulassung 
geforder ten Wer ten entspricht, ist darauf zu 
achten, daß 
1.  Reparaturen nur durch Fachpersonal  
  durchgeführ t werden. 
2.  nur original-Ersatzteile verwendet werden. 
3.  bei Ersatz der Bildröhre nur eine    
  bauar tgleiche eingebaut wird. 
Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem Zeichenkontrast wären die Folge). Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger. 
ACHTUNG:  BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND. 
《废弃电器电子产品回收处理管理条例》提
示性说明
为了更好地关爱及保护地球，当用户不再需
要此产品或产品寿命终止时，请遵守国家废
弃电器电子产品回收处理相关法律法规，将
其交给当地具有国家认可的回收处理资质的
厂商进行回收处理。

6. Regulatory Infomation