Philips 273e3lsb User Manual

							EN User manual  1
Customer care and warranty 30
Troubleshooting & FAQs 35
273E3L
www.philips.com/welcome
 
						

							Table of Contents
1 Important ............................................................1
1.1  Safety precautions and maintenance ..................1
1.2  Notational Descriptions ............................................2
1.3 Disposal of product and packing material.......3
2 Setting up the monitor .....................................4
2.1 Installation ........................................................................\
..4
2.2  Operating the monitor ..............................................5
2.3 Remove Base Stand and Base ................................7
3 Image Optimization...........................................9
3.1 Smar timage Lite .............................................................9
3.2  Smar tContrast .............................................................10
3.3  Smar tControl Lite ......................................................11
4  Technical Specifications .................................19
4.1  Resolution & Preset Modes..................................22
5 Power Management .......................................23
5.1 Automatic PowerSaving ..........................................23
6 Regulatory Information .................................24
7 Customer care and warranty ......................30
7.1 Philips' Flat Panel Monitors Pixel Defect Policy  30
7.2 Customer Care & Warranty ...............................32
8 Troubleshooting & FAQs ..............................35
8.1 Troubleshooting ..........................................................35
8.2 Smar tControl Lite FAQs ........................................37
8.3 General FAQs ..............................................................38
 
						

							1
1. Important
This electronic user’s guide is intended for anyone 
who uses the Philips monitor. Take time to read 
this user manual before you use your monitor. 
It contains impor tant information and notes 
regarding operating your monitor.
The Philips guarantee applies provided the 
product is handled properly for its intended use, 
in accordance with its operating instructions and 
upon presentation of the original invoice or cash 
receipt, indicating the date of purchase, dealer’s 
name and model and production number of the 
product.
1.1 Safety precautions and maintenance
 Warnings
Use of controls, adjustments or procedures other 
than those specified in this documentation may 
result in exposure to shock, electrical hazards and/
or mechanical hazards.
Read and follow these instructions when 
connecting and using your computer monitor.
Operation
•	Keep the monitor out of direct sunlight and 
away from stoves or any other heat source.
•	Remove any object that could fall into 
ventilation holes or prevent proper cooling of 
the monitor’s electronics. 
•	Do not block the ventilation holes on the 
cabinet.
•	When positioning the monitor, make sure the 
power plug and outlet are easily accessible.
•	If turning off the monitor by detaching the 
power cable or DC power cord, wait for 6 
seconds before attaching the power cable or 
DC power cord for normal operation.
•	Please use approved power cord provided 
by Philips all the time. If your power cord is 
missing, please contact with your local ser vice 
center. (Please refer to Customer Care 
Consumer Information Center)
•	Do not subject the monitor to severe 
vibration or high impact conditions during 
operation.
•	Do not knock or drop the monitor during 
operation or transpor tation.
Maintenance
•	To protect your monitor from possible 
damage, do not put excessive pressure on the 
LCD panel. When moving your monitor, grasp 
the frame to lift; do not lift the monitor by 
placing your hand or fingers on the LCD panel.
•	Unplug the monitor if you are not going to 
use it for an extensive period of time.
•	Unplug the monitor if you need to clean it 
with a slightly damp cloth. The screen may be 
wiped with a dr y cloth when the power is off. 
However, never use organic solvent, such as, 
alcohol, or ammonia-based liquids to clean 
your monitor.
•	To avoid the risk of shock or permanent 
damage to the set, do not expose the monitor 
to dust, rain, water, or excessive moisture 
environment.
•	If your monitor gets wet, wipe it with dr y cloth 
as soon as possible.
•	If foreign substance or water gets in your 
monitor, please turn the power off immediately 
and disconnect the power cord. Then, remove 
the foreign substance or water, and send it to 
the maintenance center.
•	Do not store or use the monitor in locations 
exposed to heat, direct sunlight or extreme 
cold.
•	In order to maintain the best performance of 
your monitor and use it for a longer lifetime, 
please use the monitor in a location that falls 
within the following temperature and humidity 
ranges.  oTemperature: 0-40°C 32-95°F oHumidity: 20-80% RH

1.Important  
						

							2
•	IMPORTANT: Always activate a moving screen 
saver program when you leave your monitor 
unattended. Always activate a periodic screen 
refresh application if your monitor will display 
unchanging static content. Uninterrupted 
display of still or static images over an 
extended period may cause “burn in”, also 
known as “after-imaging” or “ghost imaging”, 
on your screen. 
"Burn-in", "after-imaging", or "ghost imaging" 
is a well-known phenomenon in LCD panel 
technology. In most cases, the “burned in” 
or “after-imaging” or “ghost imaging” will 
disappear gradually over a period of time after 
the power has been switched off. 
 Warning
Severe” burn-in” or “after-image” or “ghost image” 
symptoms will not disappear and cannot be 
repaired. The damage mentioned above is not 
covered under your warranty.
Service
•	The casing cover should be opened only by 
qualified ser vice personnel.
•	If there is any need for any document for 
repair or integration, please contact with 
your local ser vice center. (please refer to the 
chapter of "Consumer Information Center") 
•	For transpor tation information, please refer to 
"Technical Specifications". 
•	Do not leave your monitor in a car/trunk 
under direct sun light.
 Note
Consult a ser vice technician if the monitor does 
not operate normally, or you are not sure what 
procedure to take when the operating instructions 
given in this manual have been followed.
1.2  Notational Descriptions
The following subsections describe notational 
conventions used in this document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text may be 
accompanied by an icon and printed in bold or 
italic type. These blocks contain notes, cautions or 
warnings. They are used as follows:
 Note
This icon indicates impor tant information and tips 
that help you make better use of your computer 
system.
 Caution
This icon indicates information that tells you how 
to avoid either potential damage to hardware or 
loss of data.
 Warning
This icon indicates the potential for bodily harm 
and tells you how to avoid the problem.
Some warnings may appear in alternate formats 
and may not be accompanied by an icon. In such 
cases, the specific presentation of the warning is 
mandated by the relevant regulator y authority.

1.Important 
1.Important  
						

							3
1.3 Disposal of product and packing material
Waste Electrical and Electronic Equipment-
WEEE
This marking on the product or on its packaging 
illustrates that, under European Directive 2002/96/
EC governing used electrical and electronic 
appliances, this product may not be disposed 
of with normal household waste. You are 
responsible for disposal of this equipment through 
a designated waste electrical and electronic 
equipment collection. To determine the locations 
for dropping off such waste electrical and 
electronic, contact your local government office, 
the waste disposal organization that ser ves your 
household or the store at which you purchased 
the product.
Your new monitor contains materials that can be 
recycled and reused. Specialized companies can 
recycle your product to increase the amount of 
reusable materials and to minimize the amount to 
be disposed of. 
All redundant packing material has been omitted. 
We have done our utmost to make the packaging 
easily separable into mono materials.
Please find out about the local regulations on how 
to dispose of your old monitor and packing from 
your sales representative. 
Recycling Information for Customers
Your display is manufactured with high quality 
materials and components which can be recycled 
and reused.
To learn more about our recycling program please 
visit www.philips.com/about/sustainability/recycling.

1.Important 
1.Important  
						

							4
2.1 Installation
273E3L/273E3LH
 Package contents
2. Setting up the monitor
Register  your pr oduct and get suppor t atwww.philips.com/w elcome273E3L
Quick
Start
VGA (optional) 
DVI (optional)
2011 Koninklijke Philips Electronics, N.V. All rights reserved. Unauthorized duplication is a violation of applicable laws. Made and printed in China. Version M3273ELE1T Q70G27C1813 3A Monitor drivers Quick Start Guide
SmartControl software
Audio cable (optional)   
  Install base stand
273E3L/273E3LH
1 . Place the monitor face down on soft and 
smooth surface taking care to avoid scratching 
or damaging the screen.
2 . Hold the monitor base stand with both hands and 
firmly inser t the base stand into the base column.

2. Setting up the monitor  
						

							5
 Connecting to your PC
5
5
66
  AC power input
 VGA input
  DVI-D input(Available for selected models)
 Kensington anti-thief lock
 HDMI input(Available for selected 
models) 
 Audio in input(Available for selected 
models)
Connect to PC
1 . Connect the power cord to the back of 
the monitor firmly.
2 . Turn off your computer and unplug its 
power cable.
3 . Connect the monitor signal cable to the 
video connector on the back of your 
computer.
4 . Plug the power cord of your computer 
and your monitor into a nearby outlet.
5 . Turn on your computer and monitor. If 
the monitor displays an image, installation 
is complete.
2.2  Operating the monitor
273E3L
273E3LH
8
 Front view product description
: To access the OSD menu.
: Return to previous OSD level.
: Change to 4:3 display.
: To switch monitor's power on and 
off.
: To adjust the OSD menu.
: To change the signal input source.
: Smar tImage Lite.There are three 
modes to be selected: Standard, 
Internet and Game.
!: To adjust volume of the display.

2. Setting up the monitor  
						

							6
 Description of the On Screen Display
What is On-Screen Display (OSD)?
On-Screen Display (OSD) is a feature in all Philips 
LCD monitors. It allows an end user to adjust 
screen performance or select functions of the 
monitors directly through an on-screen instruction 
window. A user friendly on screen display interface 
is shown as below:

Basic and simple instruction on the control keys
In the OSD shown above users can press  
buttons at the front bezel of the monitor to move 
the cursor, OK to confirm the choice or change.
The OSD Menu
Below is an overall view of the structure of the 
On-Screen Display. You can use this as a reference 
when you want to work your way around the 
different adjustments later on.
Main menu Sub menu
Input VGA
DVI (available for selective models)
Picture
Wide screen,4:30~1000~100On, Of
Picture Format
Brightness
Contrast
SmartContrast
OSD Settings 0~1000~100Of, 1, 2, 3, 45, 10, 20, 30, 60
Horizontal
Vertical
Transparency
OSD Time out
Setup 0~100
On, OfYes, No
0~1000~1000~100
H. Position AutoV. Position
Phase
ClockResolution Notifcation
Reset
Information
LanguageEnglishEspañol, Français, Deutsch, Italiano,
Português,   简体中文,Türkçe 
Color 6500K, 9300K
Red: 0~100
Green: 0~100
Blue: 0~100
Color Temp.
sRGB
User Defne
273E3L
Main menu
Sub menu
Input VGA
DVI
HDMI
Picture
Wide Screen,4:30~1000~100On, OfOn, Of
Picture Format
Brightness
Contrast
SmartResponse
On, Of
SmartContrast
OSD Settings 0~1000~100Of, 1, 2, 3, 45, 10, 20, 30, 60
Horizontal
Vertical
Transparency
OSD Time out
Setup
0~100
On, OfYes, No
0~1000~100
On, Of 
0~100
H. Position Over Scan
Auto
V. Position
Phase
ClockResolution Notifcation
Reset
Information
LanguageEnglishEspañol, Français, Deutsch, Italiano,
Português,   简体中文,Türkçe 
AudioMute
Color 6500K, 9300K
Red: 0~100
Green: 0~100
Blue: 0~100
Color Temp.
sRGB
User Defne
273E3LH
On, OfStand-Alone

2. Setting up the monitor 
2. Setting up the monitor  
2. Setting up the monitor      
&RORU 
/DJDJH 
3LFUH 
 
2. Setting up the monitor 
2. Setting up the monitor  
2. Setting up the monitor                
2. Setting up the monitor 
2. Setting up the monitor  
2. Setting up the monitor      
&RORU 
/DJDJH 
3LFUH  
266HLJV  
						

							7
 Resolution notification
This monitor is designed for optimal performance 
at its native resolution, 1920×1080@60Hz. 
When the monitor is powered on at a different 
resolution, an aler t is displayed on screen: Use 
1920×1080@60Hz for best results.
Display of the native resolution aler t can be 
switched off from Setup in the OSD (On Screen 
Display) menu.
 Physical Function
Tilt
2.3  Remove Base Stand and Base
 Remove the Base Stand
Before you star t disassembling the monitor base, 
please follow the instructions below to avoid 
damage or injur y.
1. Place the monitor face down on a smooth 
surface, taking care to avoid scratching or 
damaging the screen.
2.  Press the locking clips to detach the base 
stand away from the base column.

2. Setting up the monitor  
						

							8
 Remove the base
Condition:
•	 For	 VESA	standard	mounting	applications
1. Remove the 3 screw covers.
2.  Remove the 3 screws and then remove the 
base from the monitor.
 Note
This monitor accepts a 100mm x 100mm VESA-
Compliant mounting interface.
100mm
100mm

2. Setting up the monitor