Philips 231e1sb User Manual
Have a look at the manual Philips 231e1sb User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
Product Information
• Horizontal Frequency30 kHz - 83 kHz
VIDEO
• Video dot rate170 MHz
• Input impedance
- Video75 ohm
- Sync2.2K ohm
• Input signal levels0.7 Vpp
• Sync input signal
Separate sync
Composite sync
Sync on green
• Sync polaritiesPositive and negative
* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/product.htm (5 of...](http://img.usermanuals.tech/thumb/59/52402/w64_philips_231e1sb-user-manual-35.png "Page 36
Product Information
• Horizontal Frequency30 kHz - 83 kHz
VIDEO
• Video dot rate170 MHz
• Input impedance
- Video75 ohm
- Sync2.2K ohm
• Input signal levels0.7 Vpp
• Sync input signal
Separate sync
Composite sync
Sync on green
• Sync polaritiesPositive and negative
* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/product.htm (5 of...")
![Page 38
Product Information
Video display capabilities 480i/480p/576i/576p/720p/1080i/1080p(Supports HDCP)
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA DPM compliance display card or software installed in yo\
ur PC, the monitor can automatically reduce its power
consumption when not in use. If an input from a keyboard, mouse or other\
input device is detected, the monitor will wake up
automatically. The following table shows the power consumption and signa\
ling of this...](http://img.usermanuals.tech/thumb/59/52402/w64_philips_231e1sb-user-manual-37.png "Page 38
Product Information
Video display capabilities 480i/480p/576i/576p/720p/1080i/1080p(Supports HDCP)
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA DPM compliance display card or software installed in yo\
ur PC, the monitor can automatically reduce its power
consumption when not in use. If an input from a keyboard, mouse or other\
input device is detected, the monitor will wake up
automatically. The following table shows the power consumption and signa\
ling of this...")
![Page 39
Product Information
• Relative humidity20% to 80%
• System MTBF50K hours (CCFL 50K hours)
* This data is subject to change without notice.
The native resolution of the monitor is 1920 x 1080. By default, your mo\
nitor has 100% brightness (max.), 50% contrast, and
6500K color temperature, with a full white pattern.
RETURN TO TOP OF THE PAGE
Pin Assignment
1.The digital only connector contains 24 signal contacts organized in th\
ree rows of eight contacts. Signal pin assignments are
listed in the...](http://img.usermanuals.tech/thumb/59/52402/w64_philips_231e1sb-user-manual-38.png "Page 39
Product Information
• Relative humidity20% to 80%
• System MTBF50K hours (CCFL 50K hours)
* This data is subject to change without notice.
The native resolution of the monitor is 1920 x 1080. By default, your mo\
nitor has 100% brightness (max.), 50% contrast, and
6500K color temperature, with a full white pattern.
RETURN TO TOP OF THE PAGE
Pin Assignment
1.The digital only connector contains 24 signal contacts organized in th\
ree rows of eight contacts. Signal pin assignments are
listed in the...")
![Page 40
Product Information
Pin No. AssignmentPin No. Assignment
1 Red video input 9 DDC + 5 V
2 Green video input/SOG10 Logic ground
3 Blue video input11 Ground
4 Sense (GND) 12 Serial data line (SDA)
5 Cable detect (GND) 13 H. Sync / H+V. Sync
6 Red video ground14 V. Sync
7 Green video ground15 Data clock line (SCL)
8 Blue video ground
RETURN TO TOP OF THE PAGE
Product Views
Follow the links to see various views of the monitor and its components.\
Front View Product Description
RETURN TO TOP OF THE...](http://img.usermanuals.tech/thumb/59/52402/w64_philips_231e1sb-user-manual-39.png "Page 40
Product Information
Pin No. AssignmentPin No. Assignment
1 Red video input 9 DDC + 5 V
2 Green video input/SOG10 Logic ground
3 Blue video input11 Ground
4 Sense (GND) 12 Serial data line (SDA)
5 Cable detect (GND) 13 H. Sync / H+V. Sync
6 Red video ground14 V. Sync
7 Green video ground15 Data clock line (SCL)
8 Blue video ground
RETURN TO TOP OF THE PAGE
Product Views
Follow the links to see various views of the monitor and its components.\
Front View Product Description
RETURN TO TOP OF THE...")
![Page 41
Product Information
Tilt
RETURN TO TOP OF THE PAGE
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/product.htm (10 of 10)2009/4/23 N
SH 09:20:17](http://img.usermanuals.tech/thumb/59/52402/w64_philips_231e1sb-user-manual-40.png "Page 41
Product Information
Tilt
RETURN TO TOP OF THE PAGE
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/product.htm (10 of 10)2009/4/23 N
SH 09:20:17")
![Page 42
Philips Pixel Defect Policy
• Product Features
•Technical Specifications
•Resolution & Preset Modes
•Automatic Power Saving
•Physical Specification
•Pin Assignment
•Product Views
Philips Pixel Defect Policy
Philips Flat Panel Monitors Pixel Defect Policy
Philips strives to deliver the highest quality products. We use some of \
the industrys most advanced
manufacturing processes and practice stringent quality control. However,\
pixel or sub pixel defects on
the TFT LCD...](http://img.usermanuals.tech/thumb/59/52402/w64_philips_231e1sb-user-manual-41.png "Page 42
Philips Pixel Defect Policy
• Product Features
•Technical Specifications
•Resolution & Preset Modes
•Automatic Power Saving
•Physical Specification
•Pin Assignment
•Product Views
Philips Pixel Defect Policy
Philips Flat Panel Monitors Pixel Defect Policy
Philips strives to deliver the highest quality products. We use some of \
the industrys most advanced
manufacturing processes and practice stringent quality control. However,\
pixel or sub pixel defects on
the TFT LCD...")
![Page 43
Philips Pixel Defect Policy
Types of Pixel Defects
Pixel and sub pixel defects appear on the screen in different ways. Ther\
e are two categories of pixel
defects and several types of sub pixel defects within each category.
Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit o\
r on. That is,
a bright dot is a sub-pixel that stands out on the screen when the monitor displays \
a dark pattern.
There are the types of bright dot defects:
One lit red, green or...](http://img.usermanuals.tech/thumb/59/52402/w64_philips_231e1sb-user-manual-42.png "Page 43
Philips Pixel Defect Policy
Types of Pixel Defects
Pixel and sub pixel defects appear on the screen in different ways. Ther\
e are two categories of pixel
defects and several types of sub pixel defects within each category.
Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit o\
r on. That is,
a bright dot is a sub-pixel that stands out on the screen when the monitor displays \
a dark pattern.
There are the types of bright dot defects:
One lit red, green or...")
![Page 44
Philips Pixel Defect Policy
One dark sub pixelTwo or three adjacent dark sub pixels
Proximity of Pixel Defects
Because pixel and sub pixels defects of the same type that are near to o\
ne another may be more
noticeable, Philips also specifies tolerances for the proximity of pixel\
defects.
Pixel Defect Tolerances
In order to qualify for repair or replacement due to pixel defects durin\
g the warranty period, a TFT
LCD panel in a Philips flat panel monitor must have pixel or sub pixel d\
efects...](http://img.usermanuals.tech/thumb/59/52402/w64_philips_231e1sb-user-manual-43.png "Page 44
Philips Pixel Defect Policy
One dark sub pixelTwo or three adjacent dark sub pixels
Proximity of Pixel Defects
Because pixel and sub pixels defects of the same type that are near to o\
ne another may be more
noticeable, Philips also specifies tolerances for the proximity of pixel\
defects.
Pixel Defect Tolerances
In order to qualify for repair or replacement due to pixel defects durin\
g the warranty period, a TFT
LCD panel in a Philips flat panel monitor must have pixel or sub pixel d\
efects...")
![Page 45
Philips Pixel Defect Policy
Distance between two black dot defects*>15mm
Total black dot defects of all types5
TOTAL DOT DEFECTSACCEPTABLE LEVEL
MODEL231E1
Total bright or black dot defects of all types5
Note:
* 1 or 2 adjacent sub pixel defects = 1 dot defect
RETURN TO TOP OF THE PAGE
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/PIXEL.HTM (4 of 4)2009/4/23 N
SH 09:20:31](http://img.usermanuals.tech/thumb/59/52402/w64_philips_231e1sb-user-manual-44.png "Page 45
Philips Pixel Defect Policy
Distance between two black dot defects*>15mm
Total black dot defects of all types5
TOTAL DOT DEFECTSACCEPTABLE LEVEL
MODEL231E1
Total bright or black dot defects of all types5
Note:
* 1 or 2 adjacent sub pixel defects = 1 dot defect
RETURN TO TOP OF THE PAGE
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/PIXEL.HTM (4 of 4)2009/4/23 N
SH 09:20:31")
![Page 46
SmartManage
• Product Information
•Philips Pixel Defect Policy
•SmartManage Features and
Benefits
•Philips SmartControl ll
•System support and
requirement
•Installation
•Start to use
•Q&A
SmartManage & SmartControl II (Selective Models)
Introduction
Philips SmartManage is an advanced solution for users, corporate/institu\
tion IT administrator in particular, to manage their
Philips monitors as part of the asset management environment. The soluti\
on includes three...](http://img.usermanuals.tech/thumb/59/52402/w64_philips_231e1sb-user-manual-45.png "Page 46
SmartManage
• Product Information
•Philips Pixel Defect Policy
•SmartManage Features and
Benefits
•Philips SmartControl ll
•System support and
requirement
•Installation
•Start to use
•Q&A
SmartManage & SmartControl II (Selective Models)
Introduction
Philips SmartManage is an advanced solution for users, corporate/institu\
tion IT administrator in particular, to manage their
Philips monitors as part of the asset management environment. The soluti\
on includes three...")
Product Information
Tilt
RETURN TO TOP OF THE PAGE
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/product.htm (10 of 10)2009/4/23 N
SH 09:20:17
Philips Pixel Defect Policy
• Product Features
•Technical Specifications
•Resolution & Preset Modes
•Automatic Power Saving
•Physical Specification
•Pin Assignment
•Product Views
Philips Pixel Defect Policy
Philips Flat Panel Monitors Pixel Defect Policy
Philips strives to deliver the highest quality products. We use some of \
the industrys most advanced
manufacturing processes and practice stringent quality control. However,\
pixel or sub pixel defects on
the TFT LCD panels used in flat panel monitors are sometimes unavoidable\
. No manufacturer can
guarantee that all panels will be free from pixel defects, but Philips g\
uarantees that any monitor with
an unacceptable number of defects will be repaired or replaced under war\
ranty. This notice explains
the different types of pixel defects and defines acceptable defect level\
s for each type. In order to
qualify for repair or replacement under warranty, the number of pixel de\
fects on a TFT LCD panel
must exceed these acceptable levels. For example, no more than 0.0004% o\
f the sub pixels on a 19
XGA monitor may be defective. Furthermore, Philips sets even higher qual\
ity standards for certain
types or combinations of pixel defects that are more noticeable than oth\
ers. This policy is valid
worldwide.
Pixels and Sub pixels
A pixel, or picture element, is composed of three sub pixels in the prim\
ary colors of red, green and
blue. Many pixels together form an image. When all sub pixels of a pixel\
are lit, the three colored sub
pixels together appear as a single white pixel. When all are dark, the t\
hree colored sub pixels together
appear as a single black pixel. Other combinations of lit and dark sub p\
ixels appear as single pixels of
other colors.
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/PIXEL.HTM (1 of 4)2009/4/23 N
SH 09:20:31
Philips Pixel Defect Policy
Types of Pixel Defects
Pixel and sub pixel defects appear on the screen in different ways. Ther\
e are two categories of pixel
defects and several types of sub pixel defects within each category.
Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit o\
r on. That is,
a bright dot is a sub-pixel that stands out on the screen when the monitor displays \
a dark pattern.
There are the types of bright dot defects:
One lit red, green or blue sub
pixel
Two adjacent lit sub pixels:
- Red + Blue = Purple
- Red + Green = Yellow
- Green + Blue = Cyan (Light Blue)
Three adjacent lit sub pixels
(one white pixel)
A red or blue bright dot must be more than 50 percent brighter than neighboring dots
while a green bright dot is 30 percent brighter than neighboring dots.
Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or\
off. That
is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays \
a light pattern.
These are the types of black dot defects:
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/PIXEL.HTM (2 of 4)2009/4/23 N
SH 09:20:31
Philips Pixel Defect Policy One dark sub pixelTwo or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to o\ ne another may be more noticeable, Philips also specifies tolerances for the proximity of pixel\ defects. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects durin\ g the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel d\ efects exceeding the tolerances listed in the following tables. BRIGHT DOT DEFECTSACCEPTABLE LEVEL MODEL231E1 1 lit subpixel3 2 adjacent lit subpixels1 3 adjacent lit subpixels (one white pixel)0 Distance between two bright dot defects*>15mm Total bright dot defects of all types3 BLACK DOT DEFECTSACCEPTABLE LEVEL MODEL231E1 1 dark subpixel5 2 adjacent dark subpixels2 3 adjacent dark subpixels0 file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\ NGLISH/PRODUCT/product/PIXEL.HTM (3 of 4)2009/4/23 N SH 09:20:31
Philips Pixel Defect Policy
Distance between two black dot defects*>15mm
Total black dot defects of all types5
TOTAL DOT DEFECTSACCEPTABLE LEVEL
MODEL231E1
Total bright or black dot defects of all types5
Note:
* 1 or 2 adjacent sub pixel defects = 1 dot defect
RETURN TO TOP OF THE PAGE
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/PIXEL.HTM (4 of 4)2009/4/23 N
SH 09:20:31
SmartManage
• Product Information
•Philips Pixel Defect Policy
•SmartManage Features and
Benefits
•Philips SmartControl ll
•System support and
requirement
•Installation
•Start to use
•Q&A
SmartManage & SmartControl II (Selective Models)
Introduction
Philips SmartManage is an advanced solution for users, corporate/institu\
tion IT administrator in particular, to manage their
Philips monitors as part of the asset management environment. The soluti\
on includes three essential components, Philips
SmartManage Administrator, and Philips SmarControl and Agent.
If you are a small to middle business company, you may not need such pro\
fessional software to do the asset
management. Thus, Philips provide you a compact version of SmartManage, \
SmartManage Lite. You can use
SmartManage Lite to manage your Philips Monitors via LAN. Please. refer \
to below comparison chart and determine if
which one suit for your environment best.
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/product/SMART.HTM (1 of 26)2009/4/23 N
SH 09:20:46
SmartManage SmartManage Features and Benefits The Philips SmartManage is a working console for IT management to gather\ monitors assets information, run asset report, control assets security, monitor assets security, and issue instant mess\ ages to monitor users. Philips SmartManage includes the following major features: 1. Provides an additional security measure that helps corporate users safeg\ uard their investment. 2. Power saving feature that reduces utility costs and manpower required to\ turn monitors on or off. 3. Provides an efficient means for adjusting monitor performance and settin\ gs. 4. Built-in asset reports reduce audit/maintenance manpower, cycle time and\ costs. A trial version of SmartManage can be downloaded from http://www.altiris.com/philips You can also download SmartManage Lite http://www.portrait.com/dtune/phl/enu/index.html SmartManage is a software dedicated to business environments. Personal u\ sers normally do not need to use SmartManage. Philips SmartManage is a solution joint developed by Philips and Altiris\ Inc. file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\ NGLISH/PRODUCT/product/SMART.HTM (2 of 26)2009/4/23 N SH 09:20:46
SmartManage Philips SmartControl II and SmartManage Lite is a solution joint develop\ ed by Philips and Portrait Display, Inc. Philips SmartControl II SmartControl II is monitor-based software with an easy-to-use on-screen \ graphic interface that guides you through fine- tuning resolution, color calibration and other display settings includin\ g brightness, contrast, clock & phase, position, RGB, white point and - on models with onboard speakers - volume adjustments. \ Monitors install SmartControl II can also have the ability to be managed by SmartManage which can manage PCs and Monitors o\ r by SmartManage Lite which can manage Monitors. (Please refer to SmartManage/SmartManage Lite chapter) . System support and requirement: 1. Sytem support: 2000, XP, NT 4.0, XP 64 Edition, Vista 32/64. IE Support \ 6.0/7.0. 2. Language support: English, Simplified Chinese, German, Spanish, French, \ Italian, Russian, Portuguese. 3. Philips Monitor support DDC/CI Interface. Installation: 1. Installer – Install Shield Welcome l Next Button takes user to next Install pane. l Cancel prompts user if they want to cancel installation. file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\ NGLISH/PRODUCT/product/SMART.HTM (3 of 26)2009/4/23 N SH 09:20:46
SmartManage 2. Installer – Install Shield Legal l Choose I accept for installation process. l Cancel prompts user if you want to cancel installation. file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\ NGLISH/PRODUCT/product/SMART.HTM (4 of 26)2009/4/23 N SH 09:20:46
SmartManage 3. Installer – Install Shield Program Files l Check the box if you wants to install SmartManage Lite Asset Management \ services. Personal user usually not need to active this function.Read SmartManage \ section in this manual before you choose SmartManage Lite function . file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\ NGLISH/PRODUCT/product/SMART.HTM (5 of 26)2009/4/23 N SH 09:20:46