Philips 231e1sb User Manual

							
Regulatory Information
Commission Federale de la Communication (FCC Declaration)
Cet équipement a été testé et déclaré conforme auxlimi\
tes des appareils numériques de 
class B,aux termes de larticle 15 Des règles de la FCC. Ces limites \
sont conçues de façon 
à fourir une protection raisonnable contre les interférences nuisi\
bles dans le cadre dune 
installation résidentielle. CET appareil produit, utilise et peut é\
mettre des hyperfréquences 
qui, si lappareil nest pas installé et utilisé selon les consign\
es données, peuvent causer 
des interférences nuisibles aux communications radio. Cependant, rien\
 ne peut garantir 
labsence dinterférences dans le cadre dune installation particuliè\
re. Si cet appareil est la 
cause dinterférences nuisibles pour la réception des signaux de r\
adio ou de télévision, ce 
qui peut être décelé en fermant léquipement, puis en le rem\
ettant en fonction, lutilisateur 
pourrait essayer de corriger la situation en prenant les mesures suivant\
es:
 
l     Réorienter ou déplacer lantenne de réception. l     Augmenter la distance entre léquipement et le récepteur. l     Brancher léquipement sur un autre circuit que celui utilisé par l\
e récepteur. l     Demander laide du marchand ou dun technicien chevronné en radio/té\
lévision. 
Toutes modifications nayant pas reçu lapprobation des services comp\
étents en matière de 
conformité est susceptible dinterdire à lutilisateur lusage du \
présent équipement.
Nutiliser que des câbles RF armés pour les connections avec des o\
rdinateurs ou périphériques. 
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU 
REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. 
RETURN TO TOP OF THE PAGE
EN 55022 Compliance (Czech Republic Only)
RETURN TO TOP OF THE PAGE
Polish Center for Testing and Certification Notice
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/safety/regs/regulat.htm (5 of 11)2009/4/23 N
SH 09:19:52 
						

							
Regulatory Information
 
The equipment should draw power from a socket with an attached protectio\
n circuit (a three-prong 
socket). All equipment that works together (computer, monitor, printer\
, and so on) should have the same 
power supply source.
The phasing conductor of the rooms electrical installation should have \
a reserve short-circuit protection 
device in the form of a fuse with a nominal value no larger than 16 ampe\
res (A).
To completely switch off the equipment, the power supply cable must be r\
emoved from the power supply 
socket, which should be located near the equipment and easily accessible\
.
A protection mark B confirms that the equipment is in compliance with \
the protection usage 
requirements of standards PN-93/T-42107 and PN-89/E-06251.
RETURN TO TOP OF THE PAGE
North Europe (Nordic Countries) Information
Placering/Ventilation 
VARNING: 
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIG\
A, NÄR 
DU STÄLLER DIN UTRUSTNING PÅPLATS. 
 
    
   
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/safety/regs/regulat.htm (6 of 11)2009/4/23 N
SH 09:19:52 
						

							
Regulatory Information
Placering/Ventilation 
ADVARSEL: 
SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT 
ER NEMT TILGÆNGELIGE. 
 
Paikka/Ilmankierto 
VAROITUS: 
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI 
IRROTTAA PISTORASIASTA. 
 
Plassering/Ventilasjon 
ADVARSEL: 
NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR \
STØMTILFØRSEL ER LETTE Å NÅ. 
RETURN TO TOP OF THE PAGE
BSMI Notice (Taiwan Only)
 
RETURN TO TOP OF THE PAGE
Ergonomie Hinweis (nur Deutschland)
Der von uns gelieferte Farbmonitor entspricht den in der Verordnung ü\
ber den Schutz vor Schäden 
durch Röntgenstrahlen festgelegten Vorschriften. 
Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf \
die Unbedenklichkeit der 
Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Stö\
rstrahlern nach Anlage III ¤ 5 Abs. 
4 der Röntgenverordnung erfüllt sind. 
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/safety/regs/regulat.htm (7 of 11)2009/4/23 N
SH 09:19:52 
						

							
Regulatory Information
Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspric\
ht, ist darauf zu achten, daß 
1.  Reparaturen nur durch Fachpersonal durchgeführt werden. 2.  nur original-Ersatzteile verwendet werden. 
3.  bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird. 
Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Ro\
t nicht auf dunklem 
Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelas\
tung bei zu geringem 
Zeichenkontrast wären die Folge). 
Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70d\
B (A) oder weniger. 
ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß 
NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND. 
RETURN TO TOP OF THE PAGE
End-of-Life Disposal 
Your new monitor contains materials that can be recycled and reused. Spe\
cialized companies can 
recycle your product to increase the amount of reusable materials and to\
 minimize the amount to be 
disposed of. 
Please find out about the local regulations on how to dispose of your ol\
d monitor from your local Philips 
dealer. 
(For customers in Canada and U.S.A.) 
This product may contain lead and/or mercury. Dispose of in accordance t\
o local-state and federal 
regulations. 
For additional information on recycling contact 
www.eia.org (Consumer Education Initiative)
RETURN TO TOP OF THE PAGE
Information for UK only
 
WARNING - THIS APPLIANCE MUST BE GROUNDING.
Important: 
This apparatus is supplied with an approved moulded 13A 
plug. To change a fuse in this type of plug proceed as 
follows: 
1. Remove fuse cover and fuse. 
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/safety/regs/regulat.htm (8 of 11)2009/4/23 N
SH 09:19:52 
						

							
Regulatory Information
2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or 
BSI approved type. 
3. Refit the fuse cover. 
If the fitted plug is not suitable for your socket outlets, it 
should be cut off and an appropriate 3-pin plug fitted in its 
place. 
If the mains plug contains a fuse, this should have a value 
of 5A. If a plug without a fuse is used, the fuse at the 
distribution board should not be greater than 5A. 
Note: The severed plug must be destroyed to avoid a 
possible shock hazard should it be inserted into a 13A 
socket elsewhere. 
How to connect a plug 
The wires in the mains lead are coloured in accordance 
with the following code: 
BLUE - NEUTRAL (N) 
BROWN - LIVE (L) 
GREEN & YELLOW - GROUND (G) 
1. The GREEN AND YELLOW wire must be connected to 
the terminal in the plug which is marked with the letter G 
or by the Ground symbol 
 or coloured GREEN or GREEN 
AND YELLOW. 
2. The BLUE wire must be connected to the terminal which 
is marked with the letter N or coloured BLACK. 
3. The BROWN wire must be connected to the terminal 
which marked with the letter L or coloured RED. 
Before replacing the plug cover, make certain that the cord 
grip is clamped over the sheath of the lead - not simply 
over the three wires. 
 
 
 
RETURN TO TOP OF THE PAGE 
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/safety/regs/regulat.htm (9 of 11)2009/4/23 N
SH 09:19:52 
						

							
Regulatory Information
China RoHS
The Peoples Republic of China released a regulation called Management \
Methods for Controlling 
Pollution by Electronic Information Products or commonly referred to as\
 China RoHS. All products 
including CRT and LCD monitor which are produced and sold for China mark\
et have to meet China 
RoHS request.
China Energy Efficiency Label ( N-W€ýeH) implement
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/safety/regs/regulat.htm (10 of 11)2009/4/23 N
SH 09:19:52 
						

							
Regulatory Information
 
RETURN TO TOP OF THE PAGE
Safety Information: Electric, Magnetic and Electromagnetic Fields (EMF\
) 
1.  Philips Royal Electronics manufactures and sells many products targeted \
at consumers, which, like any 
electronic apparatus, in general have the ability to emit and receive el\
ectro magnetic signals.
 
2.  One of Philips leading Business Principles is to take all necessary hea\
lth and safety measures for our 
products, to comply with all applicable legal requirements and to stay w\
ell within the EMF standards 
applicable at the time of producing the products. 
3.  Philips is committed to develop, produce and market products that cause \
no adverse health effects. 
4.  Philips confirms that if its products are handled properly for their int\
ended use, they are safe to use 
according to scientific evidence available today. 
5.  Philips plays an active role in the development of international EMF and\
 safety standards, enabling Philips 
to anticipate further developments in standardization for early integrat\
ion in its products.
 
RETURN TO TOP OF THE PAGE
      
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/safety/regs/regulat.htm (11 of 11)2009/4/23 N
SH 09:19:52 
						

							
Other Related Information
  
       
 
 • Safety and Troubleshooting
 • FAQs
 • Troubleshooting
 • Regulatory Information
 •Information  
for Users in the U.S
 •Information  
for Users Outside the U.S
  
  
  
  
 
 
Other Related Information
Information for Users in the U. S.
For units set at 115 V : 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three conductor cord 
a maximum of 15-feet long and a parallel blade, grounding type attachmen\
t plug rated 15 A, 125 V. 
For units set at 230 V: 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three conductor cord 
a maximum of 15-feet long and a tandem blade, grounding type attachment \
plug rated 15 A, 250 V. 
Information for Users outside the U.S.
For units set at 230 V: 
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type at\
tachment plug rated 
15 A, 250 V. The Cord Set should have the appropriate safety approvals f\
or the country in which 
the equipment will be installed and / or be marked HAR. 
 
RETURN TO TOP OF THE PAGE 
    
 
 
 
      
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/safety/saf_other.htm2009/4/23 N
SH 09:19:56 
						

							
About This Manual
  
       
  • About This Guide
 • Notational Descriptions
  
  
  
  
 
About This Manual
About This Guide
This electronic users guide is intended for anyone who uses the Philips\
 LCD Monitor. It 
describes the LCD monitors features, setup, operation and other importa\
nt information. Its 
contents are identical to the information in our printed version.
It includes the following sections:
l     Safety and Troubleshooting Information provides tips and solutions for common problems 
as well as other related information you may need.
 
l     About This Electronic Users Manual gives an overview of information inc\
luded, along with 
notation icon descriptions and other documentation for your reference.
 
l     Product Information gives an overview of the monitors features as well as the technical 
specifications for this monitor.
 
l     Installing Your Monitor describes the initial setup process and gives an overview of how to 
use the monitor. 
l     On-Screen Display provides information on adjusting the settings on your monitor. 
l     Customer Care and Warranty contains a list of worldwide Philips Consumer Information 
Centers along with help desk phone numbers and information on the warran\
ty applicable 
to your product.
 
l     Glossary defines technical terms. 
l     Download and Print Option transfers this entire manual to your hard drive for easy 
reference.
 
 
RETURN TO TOP OF THE PAGE
 
Notational Descriptions
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/about/about.htm (1 of 3)2009/4/23 N
SH 09:20:06 
						

							
About This Manual
 The following subsections describe notational conventions used in this d\
ocument. 
Notes, Cautions and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and \
printed in bold or italic 
type. These blocks contain notes, cautions or warnings. They are used as\
 follows:
NOTE: This icon indicates important information and tips that help you m\
ake 
better use of your computer system.
CAUTION: This icon indicates information that tells you how to avoid eit\
her 
potential damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you\
 how 
to avoid the problem.
 
Some warnings may appear in alternate formats and may not be accompanied\
 by an icon. In 
such cases, the specific presentation of the warning is mandated by the \
relevant regulatory 
authority.
 
RETURN TO TOP OF THE PAGE
©2009 Koninklijke Philips Electronics NV
All rights reserved. Reproduction, copying, use, modification, hiring, r\
enting, public performance, transmission and/or 
broadcasting in whole or in part is prohibited without written consent o\
f Philips Electronics NV
 
 
    
 
 
 
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/about/about.htm (2 of 3)2009/4/23 N
SH 09:20:06