Philips 231e1sb User Manual

SmartManage
1.  Previous button is disabled until the second color screen.
2.  Next goes to the succeeding target (6-targets).
3.  Final next goes File>Presets pane.
4.  Cancel closes the UI and returns to the plug in page.
SmartImage - Allows user to change setting for better display setting based on con\
tent.
When Entertainment is set, SmartContrast and SmartResponse are enabled.
 
Plug-Ins - Asset Management Pane will only be active when selecting Asse\
t Management from the drop-down Plug Ins...

SmartManage
Displays Assent Management information on Managment, Description, Serial\
 Number, Current Timing, Domain Name, and Asset 
Management Status.
To return to Plug-in home pane select the plug-in tab. 
 
Plug-Ins - Theft Deterence Pane will only be active when selecting Theft\
 from the drop-down Plug Ins menu.
 
To enable Theft Deterrence, clicking Enable Theft button brings up the f\
ollowing screen:
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\...

SmartManage
 
1.  User can enter PIN between 4 and 9 digits numbers only.
2.  After entering PIN, Accept button takes user to the pop-up dialog box on\
 the following page.
3.  Minimum minutes set to 5. Slider set to 5 by default.
4.  Does not require the display be attached to a different host to go into \
theft mode.
Once a PIN is entered and accepted, the following dialog box appears:
l     Click on No button takes user to the following screen....

SmartManage
l     Click on Yes button takes user to secure web site landing page.
After creating PIN, the Theft Deterrence pane will indicate Theft Deterr\
ence Enabled and provide PIN Options button:
 
1.  Theft Deterrence Enabled is displayed.
2.  Disable Theft opens pane screen on next page.
3.  PIN Options button only available after user creates PIN, button opens s\
ecure PIN web site.
Disable Theft button opens the following pane:...

SmartManage
1.  After entering PIN, Accept button disables PIN.
2.  Cancel button opens up main Theft Deterrence pane, displaying Theft Dete\
rrence Disabled. Enable Theft and PIN Options 
buttons.
3.  Entering incorrect PIN results in the following dialog box:
 
Options>Preferences - Will only be active when selecting Preferences fro\
m the drop-down Options menu. On a non-
supported display capable of DDC/CI, only the Help and Options tabs are \
available....

SmartManage
1.  Displays current preference settings.
2.  A checked box enables the feature. The check box is a toggle.
3.  Enable Context Menu on desktop is checked (On) by default. Enable Cont\
ext menu displays SmartControl II selections for 
Select Preset and Tune Display in the desktop right-click context menu. \
Disabled removes SmartControl II from the right click 
context menu.
4.  Enable Task Tray icon is checked (On) by default. Enable context menu \
shows the task tray menu for SmartControl...

SmartManage
1.  Display the Source instruction pane and current input source setting.
2.  On single input displays, this pane will not be visible.
Help>User Manual - Will only be active when selecting User Manual from t\
he drop-down Help menu. On a non-supported 
display capable of DDC/CI, only the Help and Options tabs are available.\
 
 
 
Help>Version - Will only be active when selecting Version from the drop-\
 down Help menu. On a non-supported display 
capable of DDC/CI, only the Help and Options...

SmartManage
 
 
The Context Menu has four entries:
1.  SmartControll II - When selected the About Screen is displayed.
2.  Select Preset - Provides a hierarchical menu of saved presets for immedi\
ate use. A check mark shows the currently selected 
preset. Facoty Preset can also be called from the drop down menu.
3.  Tune Display - Opens the SmartControl II control panel.
4.  Fly off for SmartImage - Check current settings, Off, Office Work, Image\
Viewing, Entertainment, Economy.
 
Task Tray Menu...

SmartManage
3.  Check for Update - takes the user to PDI Landing and checks the users v\
ersion against the most current available.
4.  About - Displays detailed reference information: product version, releas\
e information, and product name.
5.  Exit - Close SmartControll II. To run SmartControll II again either sele\
ct SmartControll II from Program menu, double-click the 
desktop PC icon or restart the system.
 
Task Tray Menu Disabled
When the Task Tray is disabled in the preference folder, only the...

SmartManage
Q3. The SmartControl functions well at the beginning, but it is not workable\
, what can I do? 
A. If the following actions were executed, the monitor driver may need to \
be re-installed.
l     Change video graphic adapter to another one
l     Update video driver
l     Activities on OS, such as service pack or patch
l     Run Windows Update and updated monitor and/or video driver
l     Windows was booted with the monitor power off or disconnected.
To find out, please right click My Computer...