Philips 231e1sb User Manual

FAQs (Frequently Asked Questions)
XGA monitor has 1024x3 (R, G, B) x 768 pixels and a higher resolution \
may not be 
available without additional software processing. The panel is designed \
to optimize 
the display for a 65MHz dot clock, one of the standards for XGA displays\
. Since the 
vertical/horizontal frequency for this dot clock is 60Hz/48kHz, the opti\
mum frequency 
for this monitor is 60Hz.
 
Q: What kind of wide-angle technology is available? How does it work?
A: The TFT LCD panel is an...

FAQs (Frequently Asked Questions)
Ergonomics, Ecology and Safety Standards
Q: What is the CE mark?
A: The CE (Conformité Européenne) mark is required to be displayed\
 on all regulated 
products offered for sale on the European market. This CE mark means t\
hat a 
product complies with the relevant European Directive. A European Direct\
ive is a 
European Law that relates to health, safety, environment and consumer \
protection, 
much the same as the U.S. National Electrical Code and UL Standards.
 
Q:...

FAQs (Frequently Asked Questions)
      
file:///D|/songaiyu/PHILIPS/231E1/PHILIPS-231E1%20%20090423/lcd/manual/E\
NGLISH/PRODUCT/safety/saf_faq.htm (9 of 9)2009/4/23 N
SH 09:19:26 

Troubleshooting
  
       
  • Safety and 
Troubleshooting
 • FAQs
 • Common Problems
 • Imaging Problems 
 • Regulatory Information
 • Other Related Information
  
  
  
  
Troubleshooting
This page deals with problems that can be corrected by a user. If the pr\
oblem still persists after you have tried these 
solutions, contact Philips customer service representative. 
Common Problems 
Having this problemCheck these items
No Picture
(Power LED not lit) 
l     Make sure the power cord is plugged into...

Troubleshooting
 
Imaging Problems
Display position is incorrect
l     Press the Auto button. 
l     Adjust the image position using the Phase/Clock of Setup in 
OSD Main Controls.
 
Image vibrates on the screen
l     Check that the signal cable is properly connected to the 
graphics board or PC.
 
Vertical flicker appears
l     Press the Auto button. 
l     Eliminate the vertical bars using the Phase/Clock of Setup in 
OSD Main Controls.
 
Horizontal flicker appears
l     Press the Auto button. 
l...

Troubleshooting
An after-image remains after the power 
has been turned off.
l     This is characteristic of liquid crystal and is not caused by a 
malfunction or deterioration of the liquid crystal. The after-
image will disappear after a period of time.
Green, red, blue, dark, and white dots 
remainsl     The remaining dots are normal characteristic of the liquid 
crystal used in today’s technology.
 
Adjust blue power on light
l     Adjust blue power on light using the power LED of Setup in 
OSD Main...

Regulatory Information
  
       
 
 
 •Recycling Information for Customers
 •Waste Electrical and Electronic 
Equipment-WEEE
 •CE Declaration of Conformity
 •Energy Star Declaration
 
•Federal Communications 
Commission (FCC) Notice (U.S. 
Only)
 •FCC Declaration of Conformity
 •Commission Federale de la 
Communication (FCC Declaration)
 •EN 55022 Compliance (Czech 
Republic Only)
  
 •Polish Center for Testing and 
Certification Notice
 •North Europe (Nordic Countries) 
Information
 •BSMI Notice...

Regulatory Information
 
RETURN TO TOP OF THE PAGE
Waste Electrical and Electronic Equipment-WEEE
Attention users in European Union private households
 This marking on the product or on its packaging illustrates that, under\
 European Directive 
2002/96/EG governing used electrical and electronic appliances, this pro\
duct may not be disposed of 
with normal household waste. You are responsible for disposal of this eq\
uipment through a designated 
waste electrical and electronic equipment collection....

Regulatory Information
- TCO99, TCO03 (Requirement for Environment Labelling of Ergonomics, \
Energy, Ecology and 
Emission, TCO: Swedish Confederation of Professional Employees) for TCO\
 versions 
 
RETURN TO TOP OF THE PAGE 
Energy Star Declaration
This monitor is equipped with a function for saving energy which support\
s the VESA Display 
Power Management (DPM)
  standard. This means that the monitor must be connected to a 
computer which supports VESA DPM. Time settings are adjusted from the sy\...

Regulatory Information
l     Reorient or relocate the receiving antenna. l     Increase the separation between the equipment and receiver. l     Connect the equipment into an outlet on a circuit different from that to\
 which the receiver is 
connected. 
l     Consult the dealer or an experienced radio/TV technician for help. 
Changes or modifications not expressly approved by the party responsible\
 for compliance 
could void the users authority to operate the equipment. 
Use only RF shielded cable...