Philips 201b2cs User Manual

49 7.1 Troubleshooting
This page deals with problems that can be 
corrected by a user. If the problem still persists 
after you have tried these solutions, contact Philips 
customer ser vice representative.
Common Problems
No Picture (Power LED not lit)
v 0DNHVXUHWKHSRZHUFRUGLVSOXJJHGLQWR
the power outlet and into the back of the 
monitor. 
v )LUVWHQVXUHWKDWWKHSRZHUEXWWRQRQWKH
 IURQWRIWKHPRQLWRULVLQWKH2))SRVLWLRQ
then press it to the ON position.
No Picture (Power LED is...

50
Horizontal flicker appears
v $GMXVWWKHLPDJHXVLQJWKHk$XWRyIXQFWLRQ
 LQ260DLQ&RQWUROV
v (OLPLQDWHWKHYHU WLFDOEDUVXVLQJWKH3KDVH
 &ORFNRI6HWXSLQ260DLQ&RQWUROV,WLV
 YDOLGRQO\LQ9*$PRGH
Image appears blurred, indistinct or too dark
v $GMXVWWKHFRQWUDVWDQGEULJKWQHVVRQ
On-Screen Display.
An "after-image", "burn-in" or "ghost image" 
remains after the power has been turned off.
v 8QLQWHUUXSWHGGLVSOD\RIVWLOORUVWDWLFLPDJHV
over an...

51
7.2 SmartControl FAQs
Q1.   I change the monitor on a PC to a 
    different one and the SmartControl 
    becomes un-usable,  what do I 
  do?
Ans.:Restar t your PC and see if Smar tControl 
    can work. Otherwise, you will 
    need to remove and re-install Smar tControl 
    to ensure proper driver is installed.
Q2.   The SmartControl functions 
    worked well before, but it does not work 
    anymore, what can I do?
Ans.:If the following actions were executed, 
    the monitor driver may need to...

52
7.3 General FAQs
Q1:  When I install my monitor what should I 
    do if the screen shows 'Cannot display this 
  video mode'?
Ans.:Recommended resolution for Philips 20": 
    1600 x 900 @60Hz.
vUnplug all cables, then connect your PC to 
    the monitor that you used previously. 
v,QWKH:LQGRZV6WDU W0HQXVHOHFW6HWWLQJV
    Control Panel. In the Control Panel Window, 
    select the Display icon. Inside the Display
    Control Panel, select the 'Settings' tab. 
    Under...

53 Q8:  Can I change the color setting of my 
  monitor?
Ans.: 

54 Q12:  What is Image Sticking, or Image   
    Burn-in, or After Image, or Ghost Image in 
  Monitor panels?
Ans.:Uninterrupted display of still or static images 
    over an extended period may cause 
    "burn in", also known as "after-imaging" or 
    "ghost imaging", on your screen. "Burn-in", 
    "after-imaging", or "ghost imaging" is a 
  ZHOONQRZQSKHQRPHQRQLQ0RQLWRUSDQHO
    technology. In most cases, the "burned in" or...

55
2010 © Koninklijke Philips Electronics N.V. All rights reser ved.
Philips and the Philips Shield Emblem are registered trademarks of 
Koninklijke Philips Electronics N.V. and are used under license from 
Koninklijke Philips Elect r onics N.V.
Specifications are subject to change without notice.
Version: M2201B1T