Philips 201b2cs User Manual

EN User manual 1
Customer care and warranty 37
Troubleshooting & FAQs 49
201B2
www.philips.com/welcome
 

Table of Contents
1 Important
1.1 Safety precautions and maintenance...............  1
1.2 Notational Descriptions .........................................  2
1.3 Disposal of product and packing material....  3
2 Setting up the monitor
2.1 Installation .......................................................................  4
2.2 Operating the monitor ...........................................  5
2.3 Remove Base Stand and Base.............................  8
3 Product information
3.1 Smar timage...

1 This electronic user’s guide is intended for anyone 
who uses the Philips monitor. Take time to read 
this user manual before you use your monitor. 
It contains impor tant information and notes 
regarding operating your monitor.
The Philips guarantee applies provided the 
product is handled properly for its intended use, 
in accordance with its operating instructions and 
upon presentation of the original invoice or cash 
receipt, indicating the date of purchase, dealer’s 
name and model and production...

2
v ,03257$17$OZD\VDFWLYDWHDPRYLQJ
screen saver program when you leave your 
monitor unattended. Always activate a 
periodic screen refresh application if your 
monitor will display unchanging static 
content. Uninterrupted display of still or 
static images over an extended period may 
cause “burn in”, also known as “after-imaging” 
or “ghost imaging”,  on your screen. 
"Burn-in", "after-imaging", or "ghost imaging" is a 
well-known phenomenon in Monitor panel...

3
1.3 Disposal of product and packing 
material
Waste Electrical and Electronic Equipment-
WEEE
This marking on the product or on its packaging 
illustrates that, under European Directive 2002/96/
EC governing used electrical and electronic 
appliances, this product may not be disposed 
of with normal household waste. You are 
responsible for disposal of this equipment through 
a designated waste electrical and electronic 
equipment collection. To determine the locations 
for dropping off such waste...

4
2.1 Installation
Package contents
EDFU CD MonitorQuick start guide
VGA signal cable 
Power cord Base Stand
Monitor
Philips and the Philips’ Shield Emblem are registered trademarks of 
Koninklijke Philips Electronics N.V. and are used under license from 
Koninklijke Philips Electronics N.V.
©2010KoninklijkePhilipsElectronics,N.V.Allrightsreserved.Unauthorizedduplicationi
saviolationofapplicablelaws.MadeandprintedinChina.VersionM2201B1T
201B201B2
Quick star t guideInstallation / Installation /...

5
Connecting to your PC
26
3
5
2
346651AUDIO IN
DVID-SUBAC-IN
74
.HQVLQJWRQDQWLWKLHIORFN
AC power input
DVI-D input(Available for selected models)
VGA input
Audio input
USB upstream and downstream
Earphone jack
Connect to PC
1.Connect the power cord to the back of 
      the monitor firmly.
2.Turn off your computer and unplug its 
   power cable.
3.  Connect the monitor signal cable to the  
      video connector on the back of your 
   computer.
4
.Connect the PC audio cable to the  
      audio...

6
Description of the On Screen Display
What is On-Screen Display (OSD)?
On-Screen Display (OSD) is a feature in all Philips 
Monitors. It allows an end user to adjust screen 
performance or select functions of the monitors 
directly through an on-screen instruction window. 
A user friendly on screen display interface is 
shown as below:
Basic and simple instruction on the control keys
In the OSD shown above users can press 
buttons at the front bezel of the monitor to move 
the cursor,  OK to confirm the...

7
Height adjustment 
70mm
201B
Note
Remove the height adjustment pin lock before 
adjusting the height.
Inser t the height adjustment pin lock before 
lifting the monitor.
Resolution notification
This monitor is designed for optimal performance 
at its native resolution, 1600×900@60Hz. 
:KHQWKHPRQLWRULVSRZHUHGRQDWDGLIIHUHQW
resolution, an aler t is displayed on screen: Use 
1600×900@60Hz for best results.
Display of the native resolution aler t can be 
switched off from Setup in the OSD (On...

8
2.3 Remove Base Stand and Base
Remove the Base
Before you star t disassembling the monitor base, 
please follow the instructions below to avoid 
damage or injur y.
1.Extend the monitor base to its maximum 
height. 
201B
2.Place the monitor face down on a smooth 
surface, taking care to avoid scratching or 
damaging the screen. Then lift the monitor 
stand.
3.Release the lock of base stand then pull the 
base stand away from the base column.