Philips 200aw8f User Manual

							
Physical Specifications 
• Dimension with Stand 
(WxHxD )472.89 x 400.42 x 213.59 mm 
• Weight 
5.
5 kg
• Tilt-5° ~ 25° 
• Power supply 100 — 240 VAC, 60 — 50 Hz
• Power consumption  43 W* (TYP)
• Temperature 5° C to 35° C (operating)
-20° C to 60° C (storage)
• Relative humidity  10% to 85%
• System MTBF 50K hours (including CCFL 40K hours)
• Cabinet color  200AW8: Black/Silver
* This data is subject to change without notice.
* Resolution 1280x1024, standard size, brightness max., contrast 50%, 65\
00° K, full white pattern, 
without audio/USB.
  RETURN TO TOP OF THE PAGE
Pin Assignment
1. The digital only connector contains 24 signal contacts organized in t\
hree rows of eight 
contacts. Signal pin assignments are listed in the following table: 
Pin No.  Signal 
Assignment
 Pin 
No.  Signal 
Assignment
 Pin 
No.
Signal 
Assignment
1 T.M.D.S. Data2-
9 T.M.D.S. Data1-17T.M.D.S. Data0-
2
 T.M.D.S. Data2+ 10 T.M.D.S. Data1+18T.M.D.S. Data0+
3
 T.M.D.S. Data2/4 
Shield 11 T.M.D.S. Data1/3 
Shield19T.M.D.S. Data0/5 
Shield
4
 No connect  12 No connect 20No connect 
5
 No connect  13 No connect 21No connect 
6
 DDC Clock  14 +5V Power 22T.M.D.S. Clock 
Shield
7
 DDC Data  15 Ground (for +5V)23T.M.D.S. Clock+
8
 No connect  16Hot Plug Detect 24T.M.D.S. Clock-
 
 
						

							
 
2. The 15-pin D-sub connector (male) of the signal cable: 
 
Pin  No.  Assignment Pin 
No.  Assignment
1 Red video input 
9 +5V
2
 Green video input/SOG 10 Logic ground
3
 Blue video input 11 Ground
4
 Sense (GND)  12 Serial data line (SDA)
5
 Hot Plug Detect 13 H. Sync / H+V
6
 Red video ground 14 V. Sync (VCLK for DDC)
7
 Green video ground 15 Data clock line (SCL)
8
 Blue video ground
 
RETURN TO TOP OF THE PAGE
Product Views
Follow the links to see various views of the monitor and its components.\
Front View Product Description
 
RETURN TO TOP OF THE PAGE
Physical Function 
 
						

							
1) Tilt
RETURN TO TOP OF THE PAGE
 
						

							
   
       
 
 
• Product 
Features
 •Technical 
Specifications
 •Resolution & 
Preset Modes
 •Automatic 
Power Saving
 •Physical 
Specification
 •Pin 
Assignment
 •Product 
Views
   
 
   
Philips Pixel Defect Policy
Philips Flat Panel Monitors Pixel Defect Policy
Philips strives to deliver the highest quality products. We use some of \
the industrys most 
advanced manufacturing processes and practice stringent quality control.\
 However, pixel or 
sub pixel defects on the TFT LCD panels used in flat panel monitors are \
sometimes 
unavoidable. No manufacturer can guarantee that all panels will be free \
from pixel defects, 
but Philips guarantees that any monitor with an unacceptable number of d\
efects will be 
repaired or replaced under warranty. This notice explains the different \
types of pixel defects 
and defines acceptable defect levels for each type. In order to qualify \
for repair or 
replacement under warranty, the number of pixel defects on a TFT LCD pan\
el must exceed 
these acceptable levels. For example, no more than 0.0004% of the sub pi\
xels on a 15 XGA 
monitor may be defective. Furthermore, Philips sets even higher quality \
standards for 
certain types or combinations of pixel defects that are more noticeable \
than others. This 
policy is valid worldwide.
Pixels and Sub pixels 
A pixel, or picture element, is composed of three sub pixels in the prim\
ary colors of red, 
green and blue. Many pixels together form an image. When all sub pixels \
of a pixel are lit, 
the three colored sub pixels together appear as a single white pixel. Wh\
en all are dark, the 
three colored sub pixels together appear as a single black pixel. Other \
combinations of lit 
and dark sub pixels appear as single pixels of other colors.
 
Types of Pixel Defects 
Pixel and sub pixel defects appear on the screen in different ways. Ther\
e are two categories 
of pixel defects and several types of sub pixel defects within each cate\
gory. 
Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit o\
r 
on. That is, a bright dot is a sub-pixel that stands out on the screen when the monitor 
displays a dark pattern. There are the types of bright dot defects:
 
						

							
 
One lit red, green or blue 
sub pixelTwo adjacent lit sub pixels:
- Red + Blue = Purple
- Red + Green = Yellow
- Green + Blue = Cyan (Light Blue)
Three adjacent lit sub 
pixels (one white pixel)
A red or blue bright dot must be more than 50 percent brighter than neighboring 
dots while a green bright dot is 30 percent brighter than neighboring do\
ts.
Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or\
 
off. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor 
displays a light pattern. These are the types of black dot defects:

One dark sub pixel Two or three adjacent dark sub pixels
Proximity of Pixel Defects 
Because pixel and sub pixels defects of the same type that are near to o\
ne another may be 
more noticeable, Philips also specifies tolerances for the proximity of \
pixel defects. 
BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 
MODEL
200
AW8
1 lit subpixel 3
2 adjacent lit subpixels 1
3 adjacent lit subpixels (one white pixel) 0
Distance between two bright dot defects* 15mm
Total bright dot defects of all types 3
 
    
 
   
 
						

							
BLACK DOT DEFECTSACCEPTABLE LEVEL 
MODEL 200
AW8
1 dark subpixel 5
2 adjacent dark subpixels 2
3 adjacent dark subpixels 0
Distance between two black dot defects* 15mm
Total black dot defects of all types 5
 
TOTAL DOT DEFECTSACCEPTABLE LEVEL 
MODEL
200AW8
Total bright or black dot defects of all types 5 
Note:
* 1 or 2 adjacent sub pixel defects = 1 dot defect
Your Philips monitor is ISO13406-2 Compliant
 
 
RETURN TO TOP OF THE PAGE
       
 
						

							
   
       
 
 
• Product 
Information
 •Philips Pixel 
Defect Policy
 •SmartManage 
Introduction 
 
•SmartManage 
Features and 
Benefits
 •Philips 
SmartControl 
 •Q&A
 
  
SmartManage & SmartControl (Selective Models)
Introduction
Philips SmartManage is an advanced solution for users, corporate/institu\
tion IT 
administrator in particular, to manage their Philips monitors as part of\
 the asset 
management environment. The solution includes three essential components\
, Philips 
SmartManage Administrator, and Philips SmarControl and Agent.
Philips SmartManage is a solution joint developed by Philips and Altiris\
 Inc.
SmartManage Features and Benefits
The Philips SmartManage is a working console for IT management to gather\
 monitors assets 
information, run asset report, control assets security, monitor assets s\
ecurity, and issue 
instant messages to monitor users.
Philips SmartManage includes the following major features:
1.  Provides an additional security measure that helps corporate users safeg\
uard their 
investment.
2.  Power saving feature that reduces utility costs and manpower required to\
 turn 
monitors on or off.
3.  Provides an efficient means for adjusting monitor performance and settin\
gs.
4.  Built-in asset reports reduce audit/maintenance manpower, cycle time and\
 costs.
A trial version of SmartManage can be downloaded from
http://www.altiris.com/philips
For more information of Philips SmartManage, please contact with Philips\
 sales 
representatives in your country.
SmartManage is a software dedicated to business environments. Personal 
users normally do not need to use SmartManage.
Philips SmartControl 
The SmartControl and SmartManage Agent are deployed and installed in com\
puters using 
Philips monitors. With SmartControl and SmartManage Agent, monitors and \
PCs can 
interact with the administrators inquiries. Because SmartControl operat\
es on individual PC, 
end users can also use SmartControl to adjust monitors performance sett\
ings.
1. Requirement
 
						

							
 
l     Graphic cards with nVIDIA (TNT2, GeForce, Quadro, or newer) and ATI (\
Radeon or 
newer) graphic chipsets that support the DDC/CI interface
l     Microsoft Windows 2000 and XP operation systems.
l     Philips monitors supporting DDC/CI interface
2. Installation
How to download SmartControl Installation  file:
1.  Visit http:// www.philips.com
2.  Select Your Country
3.  Click on Contact & Support
4.  Enter your model number
5.  Enter Software & Driver page
6.  Select SmartControl Software, and you can download SmartControl and it\
s 
driver for installation.
3. Accessing SmartControl
l     Right click on the desktop of your PC, and select Properties from the sh\
ortcut menu 
pops up.
l     Click on Settings tab, and click on Advanced button.
l     Click Philips SmartControl tab.
4. SmartControl Options
l     Display and Sound
By moving the sliding bar toward left or right, users will be able to ad\
just brightness, 
contrast, audio volume (if applicable), video noise (not applicable w\
hen using DVI-D 
input), and color temperatures.
 
l     Position 
Users can adjust the horizontal and vertical position of the screen by m\
oving the 
sliding bar left and right. This function is disabled when using DVI-D (\
digit) input.
 
    
 
						

							
l     Product Information
Click Product Information in the left pane to view the product informati\
on stored in 
the monitors memory.
 
l     General
Click on General for general information including driver information, d\
evice 
information, and monitor control.
 
Within monitor control, users can click on Auto Setup to achieve optimum\
 performance or 
 
  
 
						

							
click on factory reset to reset the parameters of the monitor. Such choi\
ces are disabled 
when using DVI-D (digit) input.
Q&A
Q1. What is the difference between SmartManage, SmartControl?
A. SmartManage is a remote management/control software for IT managers to m\
anage 
monitors across the network
SmartControl is a control panel extension, which helps users to adjust m\
onitor 
performances and settings by a software interface, instead of the hardwa\
re buttons at the 
front bezel of the monitors.
Q2. I change the monitor on a PC to a different one and the SmartControl bec\
omes un-
usable, what do I do?
A. Restart your PC and see if SmartControl can work. Otherwise, you will ne\
ed to remove 
and re-install SmartControl to ensure proper driver is installed.
Q3. The SmartControl functions well at the beginning, but it is not workable\
, what can I do?
A. If the following actions were executed, the monitor driver may need to \
be re-installed.
l     Change video graphic adapter to another one
l     Update video driver
l     Activities on OS, such as service pack or patch
l     Run Windows Update and updated monitor and/or video driver
l     Windows was booted with the monitor power off or disconnected.
To find out, please right click My Computer and click on Properties->Har\
dware-> Device 
Manager. 
If you see Plug and Play Monitor shows under Monitor, then you need to\
 re-install. Simply 
remove SmartControl and re-install it.
Q4. After installing SmartControl, when clicking on SmartControl tab, nothi\
ng shows up 
after a while or a failure message shows, what happened?
A. It might be your graphic adaptor is not compatible with the SmartContro\
l. If your graphic 
adaptor is one of the above mentioned brands, try to download the most u\
pdated graphic 
adaptor driver from corresponding companies’ web site. Install the dr\
iver. Remove 
SmartControl, and re-install it once more.
If it is still not working, we are sorry that the graphic adaptor is not\
 supported. Please pay 
attention to Philips’ web site for any updated SmartControl driver av\
ailable.
Q5. When I click on Product Information, only partial information is shown,\
 what happened?
A. It might be your graphic card adaptor driver is not the most updated ve\
rsion which fully 
supporting DDC/CI interface. Please try to download the most updated gra\
phic adaptor 
driver from corresponding companies’ web site. Install the driver. Re\
move SmartControl, 
and re-install it once more.
 
 
RETURN TO TOP OF THE PAGE