Philips 200aw8f User Manual

   
       
 
 
• 
Front View 
Produt 
Description
 • 
Connecting 
to Your PC
 • Getting 
Started 
 • Optimizing 
Performance
Installing Your LCD Monitor
Front View Product Description
 
 
 
 
1To switch monitor’s power on and off
2
MENUTo access OSD menu
3
Hot key of Contrast adjustment and To adjust OSD value up 
when OSD menu is active
4
Hot key of Brightness adjustment and To adjust OSD value 
down when OSD menu is active 
5
  Automatically adjust the horizontal position, vertical position, 
phase...

RETURN TO TOP OF THE PAGE
Optimizing Performance
For best performance, ensure that your display settings are set at 1680x\
1050, 60Hz.
Note: To check the current display resolution, press the OK button once. 
The current display mode is shown on the OSD. If the display setting is \
not 
optimized, a warning string USE 1680x1050 FOR BEST RESULT appears in 
the OSD menu.
You can also install the Flat Panel Adjust (FP Adjustment) program, a program for getting the best 
performance out of your monitor....

   
        
  1.Put base on the desk and 
insert whole unit into base 
vertically  
 2.Check if insertion ok
 
   
   
 
 
     3.Put whole unit horizontally 
 
      
   
 
 
 

  RETURN TO TOP OF THE PAGE 
 
 
   
       
 

•Front View 
Product
Description
• Accessory 
Pack
• Connecting 
to Your PC
• Getting 
Started
• Optimizing 
Performance
Connecting to Your PC
Accessory Pack
Unpack all the parts.
Power cordVGA cableEDFU CD
DVI cable (Optional)
RETURN TO TOP OF THE PAGE
Connecting to Your PC
1)
Audio cable
 

2)
3) Cable management
4)Connect to PC
1123
4
2
3
5
200AW8
 

(1)AC power input
(2)DVI-D input
(3)VGA input
(4)Kensington anti-thief lock
(6)Set your Monitor at 1680x1050@60Hz for best performance. It is also 
strongly recommended to use DVI input (may require the optional DVI cab\
le) 
for the true digital enjoyment.
RETURN TO TOP OF THE PAGE
(5)PC Audio input
 

   
       
 
 
Your LCD 
Monitor :
 
• Front View 
Product 
Description
 
• Setting Up 
and 
Connecting 
Your 
Monitor
 • Getting Started 
 • Optimizing Performance
  
 
   
   
   
   
   
   
Getting Started 
Getting Started 
Use the information file ( .inf) for Windows® 95/98/2000/Me/XP
/Vista or later 
The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play\
 requirements 
for Windows® 95/98/2000/Me/XP
/Vista. This information file ( .inf) should be installed in 
order that your...

7.Select Display a list of the known drivers for this device so that I ca\
n choose a 
specific driver, then click on Next and then click on Have disk....\
 
8.Click on the Browse... button then select the appropriate drive F: ( \
CD-ROM 
Drive).
9.Click on the Open button, then click on the OK button. 
10.Select your monitor model and click on the Next button. 
11.Click on the Finish button then the Close button. 
If you can see the Digital Signature Not Found window, click on the Y\
es button. 
For...