Philips 191el1sb User Manual

Regulatory Information
If the mains plug contains a fuse, this should have a value 
of 5A. If a plug without a fuse is used, the fuse at the 
distribution board should not be greater than 5A. 
Note: The severed plug must be destroyed to avoid a 
possible shock hazard should it be inserted into a 13A 
socket elsewhere. 
How to connect a plug 
The wires in the mains lead are coloured in accordance 
with the following code: 
BLUE - NEUTRAL (N) 
BROWN - LIVE (L) 
GREEN & YELLOW - GROUND (G) 
1. The GREEN...

Regulatory Information
including CRT and LCD monitor which are produced and sold for China mark\
et have to meet China 
RoHS request.
 
RETURN TO TOP OF THE PAGE
      
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/safety/regs/regulat.htm (9 of 9)2009/9/11 NSH 01:35:53 

Other Related Information
  
       
 
 • Safety and Troubleshooting
 • FAQs
 • Troubleshooting
 • Regulatory Information
 •Information  
for Users in the U.S
 •Information  
for Users Outside the U.S
  
  
  
  
 
 
Other Related Information
Information for Users in the U. S.
For units set at 115 V : 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three conductor cord 
a maximum of 15-feet long and a parallel blade, grounding type attachmen\
t plug rated 15 A, 125 V. 
For...

About This Manual
  
       
 
 • About This Guide
 • Notational Descriptions
  
  
  
  
 
About This Manual
About This Guide
This electronic users guide is intended for anyone who uses the Philips\
 LCD Monitor. It 
describes the LCD monitors features, setup, operation and other importa\
nt information. Its 
contents are identical to the information in our printed version.
It includes the following sections:
l     Safety and Troubleshooting Information provides tips and solutions for common problems...

About This Manual
Throughout this guide, blocks of text may be accompanied by an icon and \
printed in bold or italic 
type. These blocks contain notes, cautions or warnings. They are used as\
 follows:
NOTE: This icon indicates important information and tips that help you m\
ake 
better use of your computer system.
CAUTION: This icon indicates information that tells you how to avoid eit\
her 
potential damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and...

Product Information
  
       
 
•Lead-free Product
•Technical Specifications
•Resolution & Preset Modes
•Philips Pixel Defect Policy
•Automatic Power Saving
•Physical Specification
•Pin Assignment
•Product Views
•Physical Function
Product Information 
Lead-free Product  
 
Lead free display promotes environmentally sound recovery and disposal o\
f waste from 
electrical and electronic equipment. Toxic substances like Lead has been\
 eliminated and 
compliance with European community’s stringent RoHs...

Product Information
VIDEO
• Video dot rate165 MHz
• Input impedance
- Video75 ohm
- Sync2.2K ohm
• Input signal levels0.7 Vpp
• Sync input signal
Separate sync  
Composite sync 
Sync on green
 
• Sync polaritiesPositive and negative
* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
A.Maximum Resolution 
-For 191EL1 
 1366 x 768 at 60Hz (analog input)
B.Recommended Resolution
-For 191EL1 
 1366 x 768 at 60Hz (analog input)...

Product Information
 
13 factory preset modes:
H. freq (kHz)ResolutionV. freq (Hz)
31.47720*40070.09
31.47640*48059.94
35.00640*48067.00
37.50640*48075.00
31.16800*60056.25
37.88800*60060.32
46.88800*60075.00
48.361024*76860.00
60.021024*76875.03
63.981280*102460.02
79.981280*102475.03
47.711366*76859.79
59.791366*76874.89
RETURN TO TOP OF THE PAGE 
Automatic Power Saving
If you have VESA DPMS compliance display card or software installed in y\
our PC, the monitor can automatically 
reduce its power...

Product Information
This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, we have 
determined to that this product meets the ENERGY STAR® guidelines for energy efficiency.
 
 
RETURN TO TOP OF THE PAGE
Physical Specifications 
• Tilt-5° ~ 15° 
• Power supply100 ~ 240 VAC, 50-60 Hz
• Power consumption

Product Information
8 NC16 Hot Plug Detect24 TMDS Clock-
 
 
 
2.The 15-pin D-sub connector (male) of the signal cable: 
 
Pin No. AssignmentPin No. Assignment
1 Red video input 9 + 5 V
2 Green video input/SOG10 Open
3 Blue video input11 Ground
4 Sense (GND) 12 Serial data line (SDA)
5 Cable detect13 H. Sync
6 Red video ground14 V. Sync
7 Green video ground15 Data clock line (SCL)
8 Blue video ground
 
RETURN TO TOP OF THE PAGE
Product Views...