Philips 191el1sb User Manual

Troubleshooting
  
       
  • Safety and 
Troubleshooting
 • FAQs
 • Common Problems
 • Imaging Problems 
 • Regulatory Information
 • Other Related Information
  
  
  
  
Troubleshooting
This page deals with problems that can be corrected by a user. If the pr\
oblem still persists after you have tried these 
solutions, contact Philips customer service representative. 
Common Problems 
Having this problemCheck these items
No Picture
(Power LED not lit) 
l     Make sure the power cord is plugged into...

Troubleshooting
 Image vibrates on the screen
l     Check that the VGA cable is properly connected to the 
graphics board or PC.
 
Vertical flicker appears
l     Press the Auto button. 
l     Eliminate the vertical bars using the Phase/Clock of More 
Settings in OSD Main Controls.
 
Horizontal flicker appears
l     Press the Auto button. 
l     Eliminate the vertical bars using the Phase/Clock of More 
Settings in OSD Main Controls.
The screen is too bright or too dark
l     Adjust the contrast and...

Troubleshooting
For further assistance, refer to the Consumer Information Centers list and contact Philips customer service 
representative.
 
RETURN TO TOP OF THE PAGE
 
      
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/safety/saf_troub.htm (3 of 3)2009/9/11 NSH 01:35:51 

Regulatory Information
  
       
 
 •Recycling Information for Customers
 •Waste Electrical and Electronic 
Equipment-WEEE
 •CE Declaration of Conformity
 •Energy Star Declaration
 
•Federal Communications 
Commission (FCC) Notice (U.S. 
Only)
 •FCC Declaration of Conformity
 •Commission Federale de la 
Communication (FCC Declaration)
 •EN 55022 Compliance (Czech 
Republic Only)
 •MIC Notice (South Korea Only)
 •Polish Center for Testing and 
Certification Notice
 •North Europe (Nordic Countries)...

Regulatory Information
- 2004/108/EC (EMC Directive)  
and is produced by a manufacturing organization on ISO9000 level. 
The product also comply with the following standards  
- ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for CRT Monito\
r)  
- ISO13406-2 (Ergonomic requirement for Flat Panel Display)  
- GS EK1-2000 (GS specification)  
- prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual\
 Display) 
- MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields\...

Regulatory Information
This equipment has been tested and found to comply with the limits for a\
 Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed \
to provide 
reasonable protection against harmful interference in a residential inst\
allation. This 
equipment generates, uses and can radiate radio frequency energy and, if\
 not installed and 
used in accordance with the instructions, may cause harmful interference\
 to radio 
communications. However, there is no...

Regulatory Information
Commission Federale de la Communication (FCC Declaration)
Cet équipement a été testé et déclaré conforme auxlimi\
tes des appareils numériques de 
class B,aux termes de larticle 15 Des règles de la FCC. Ces limites \
sont conçues de façon 
à fourir une protection raisonnable contre les interférences nuisi\
bles dans le cadre dune 
installation résidentielle. CET appareil produit, utilise et peut é\
mettre des hyperfréquences 
qui, si lappareil nest pas installé et utilisé selon...

Regulatory Information
 
The phasing conductor of the rooms electrical installation should have \
a reserve short-circuit protection 
device in the form of a fuse with a nominal value no larger than 16 ampe\
res (A).
To completely switch off the equipment, the power supply cable must be r\
emoved from the power supply 
socket, which should be located near the equipment and easily accessible\
.
A protection mark B confirms that the equipment is in compliance with \
the protection usage 
requirements of...

Regulatory Information
 
Paikka/Ilmankierto 
VAROITUS: 
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI 
IRROTTAA PISTORASIASTA. 
 
Plassering/Ventilasjon 
ADVARSEL: 
NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR \
STØMTILFØRSEL ER LETTE Å NÅ. 
RETURN TO TOP OF THE PAGE
BSMI Notice (Taiwan Only)
 
RETURN TO TOP OF THE PAGE
Ergonomie Hinweis (nur Deutschland)
Der von uns gelieferte Farbmonitor entspricht den in der Verordnung ü\
ber den Schutz vor Schäden 
durch...

Regulatory Information
Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Ro\
t nicht auf dunklem 
Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelas\
tung bei zu geringem 
Zeichenkontrast wären die Folge). 
Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70d\
B (A) oder weniger. 
ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß 
NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND. 
RETURN TO TOP OF THE PAGE
End-of-Life Disposal 
Your...