Philips 191el1sb User Manual

							
Regulatory Information
If the mains plug contains a fuse, this should have a value 
of 5A. If a plug without a fuse is used, the fuse at the 
distribution board should not be greater than 5A. 
Note: The severed plug must be destroyed to avoid a 
possible shock hazard should it be inserted into a 13A 
socket elsewhere. 
How to connect a plug 
The wires in the mains lead are coloured in accordance 
with the following code: 
BLUE - NEUTRAL (N) 
BROWN - LIVE (L) 
GREEN & YELLOW - GROUND (G) 
1. The GREEN AND YELLOW wire must be connected to 
the terminal in the plug which is marked with the letter G 
or by the Ground symbol 
 or coloured GREEN or GREEN 
AND YELLOW. 
2. The BLUE wire must be connected to the terminal which 
is marked with the letter N or coloured BLACK. 
3. The BROWN wire must be connected to the terminal 
which marked with the letter L or coloured RED. 
Before replacing the plug cover, make certain that the cord 
grip is clamped over the sheath of the lead - not simply 
over the three wires. 
 
 
RETURN TO TOP OF THE PAGE 
China RoHS
The Peoples Republic of China released a regulation called Management \
Methods for Controlling 
Pollution by Electronic Information Products or commonly referred to as\
 China RoHS. All products 
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/safety/regs/regulat.htm (8 of 9)2009/9/11 NSH 01:35:53 
						

							
Regulatory Information
including CRT and LCD monitor which are produced and sold for China mark\
et have to meet China 
RoHS request.
 
RETURN TO TOP OF THE PAGE
      
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/safety/regs/regulat.htm (9 of 9)2009/9/11 NSH 01:35:53 
						

							
Other Related Information
  
       
 
 • Safety and Troubleshooting
 • FAQs
 • Troubleshooting
 • Regulatory Information
 •Information  
for Users in the U.S
 •Information  
for Users Outside the U.S
  
  
  
  
 
 
Other Related Information
Information for Users in the U. S.
For units set at 115 V : 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three conductor cord 
a maximum of 15-feet long and a parallel blade, grounding type attachmen\
t plug rated 15 A, 125 V. 
For units set at 230 V: 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT\
 three conductor cord 
a maximum of 15-feet long and a tandem blade, grounding type attachment \
plug rated 15 A, 250 V. 
Information for Users outside the U.S.
For units set at 230 V: 
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type at\
tachment plug rated 
15 A, 250 V. The Cord Set should have the appropriate safety approvals f\
or the country in which 
the equipment will be installed and / or be marked HAR. 
 
RETURN TO TOP OF THE PAGE 
    
 
 
 
      
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/safety/saf_other.htm2009/9/11 NSH 01:35:54 
						

							
About This Manual
  
       
 
 • About This Guide
 • Notational Descriptions
  
  
  
  
 
About This Manual
About This Guide
This electronic users guide is intended for anyone who uses the Philips\
 LCD Monitor. It 
describes the LCD monitors features, setup, operation and other importa\
nt information. Its 
contents are identical to the information in our printed version.
It includes the following sections:
l     Safety and Troubleshooting Information provides tips and solutions for common problems 
as well as other related information you may need.
 
l     About This Electronic Users Manual gives an overview of information inc\
luded, along with 
notation icon descriptions and other documentation for your reference.
 
l     Product Information gives an overview of the monitors features as well as the technical 
specifications for this monitor.
 
l     Installing Your Monitor describes the initial setup process and gives an overview of how to 
use the monitor. 
l     On-Screen Display provides information on adjusting the settings on your monitor. 
l     Customer Care and Warranty contains a list of worldwide Philips Consumer Information 
Centers along with help desk phone numbers and information on the warran\
ty applicable 
to your product.
 
l     Glossary defines technical terms. 
l     Download and Print Option transfers this entire manual to your hard drive for easy 
reference.
 
 
RETURN TO TOP OF THE PAGE
 
Notational Descriptions
The following subsections describe notational conventions used in this d\
ocument. 
Notes, Cautions and Warnings
    
 
 
 
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/about/about.htm (1 of 2)2009/9/11 NSH 01:35:42 
						

							
About This Manual
Throughout this guide, blocks of text may be accompanied by an icon and \
printed in bold or italic 
type. These blocks contain notes, cautions or warnings. They are used as\
 follows:
NOTE: This icon indicates important information and tips that help you m\
ake 
better use of your computer system.
CAUTION: This icon indicates information that tells you how to avoid eit\
her 
potential damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you\
 how 
to avoid the problem.
 
Some warnings may appear in alternate formats and may not be accompanied\
 by an icon. In 
such cases, the specific presentation of the warning is mandated by the \
relevant regulatory 
authority.
 
RETURN TO TOP OF THE PAGE
 
 
      
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/about/about.htm (2 of 2)2009/9/11 NSH 01:35:42 
						

							
Product Information
  
       
 
•Lead-free Product
•Technical Specifications
•Resolution & Preset Modes
•Philips Pixel Defect Policy
•Automatic Power Saving
•Physical Specification
•Pin Assignment
•Product Views
•Physical Function
Product Information 
Lead-free Product  
 
Lead free display promotes environmentally sound recovery and disposal o\
f waste from 
electrical and electronic equipment. Toxic substances like Lead has been\
 eliminated and 
compliance with European community’s stringent RoHs directive mandati\
ng restrictions on 
hazardous substances in electrical and electronic equipment have been ad\
hered to in order to 
make Philips monitors safe to use throughout its life cycle. 
 
 
Technical Specifications* 
LCD PANEL 
• TypeTFT LCD
• Screen size18.5W visual
• Pixel Pitch0.300 x 0.300 mm
• LCD Panel type 
1366 x 768 pixels 
R.G.B. vertical stripe  
Anti-glare polarizer, hard coated
 
• Effective viewing area409.8 x 230.4 mm
• Display Colors16.7M
SCANNING
• Vertical refresh rate56 Hz-76 Hz
• Horizontal Frequency30 kHz - 83 kHz
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/product/product.htm (1 of 7)2009/9/11 NSH 01:35:44 
						

							
Product Information
VIDEO
• Video dot rate165 MHz
• Input impedance
- Video75 ohm
- Sync2.2K ohm
• Input signal levels0.7 Vpp
• Sync input signal
Separate sync  
Composite sync 
Sync on green
 
• Sync polaritiesPositive and negative
* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
A.Maximum Resolution 
-For 191EL1 
 1366 x 768 at 60Hz (analog input)
B.Recommended Resolution
-For 191EL1 
 1366 x 768 at 60Hz (analog input)
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/product/product.htm (2 of 7)2009/9/11 NSH 01:35:44 
						

							
Product Information
 
13 factory preset modes:
H. freq (kHz)ResolutionV. freq (Hz)
31.47720*40070.09
31.47640*48059.94
35.00640*48067.00
37.50640*48075.00
31.16800*60056.25
37.88800*60060.32
46.88800*60075.00
48.361024*76860.00
60.021024*76875.03
63.981280*102460.02
79.981280*102475.03
47.711366*76859.79
59.791366*76874.89
RETURN TO TOP OF THE PAGE 
Automatic Power Saving
If you have VESA DPMS compliance display card or software installed in y\
our PC, the monitor can automatically 
reduce its power consumption when not in use. If an input from a keyboar\
d, mouse or other input device is detected, 
the monitor will wake up automatically. The following table shows the \
power consumption and signaling of this 
automatic power saving feature: 
Power Management Definition 
VESA Mode Video H-sync V-sync Power Used LED color 
Active ON Yes Yes < 23 W (typ.) Green 
Sleep OFF No No < 1.0 W Yellow 
Switch OffOFF--< 0.5WOff
    
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/product/product.htm (3 of 7)2009/9/11 NSH 01:35:44 
						

							
Product Information
This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, we have 
determined to that this product meets the ENERGY STAR® guidelines for energy efficiency.
 
 
RETURN TO TOP OF THE PAGE
Physical Specifications 
• Tilt-5° ~ 15° 
• Power supply100 ~ 240 VAC, 50-60 Hz
• Power consumption
						

							
Product Information
8 NC16 Hot Plug Detect24 TMDS Clock-
 
 
 
2.The 15-pin D-sub connector (male) of the signal cable: 
 
Pin No. AssignmentPin No. Assignment
1 Red video input 9 + 5 V
2 Green video input/SOG10 Open
3 Blue video input11 Ground
4 Sense (GND) 12 Serial data line (SDA)
5 Cable detect13 H. Sync
6 Red video ground14 V. Sync
7 Green video ground15 Data clock line (SCL)
8 Blue video ground
 
RETURN TO TOP OF THE PAGE
Product Views
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/product/product.htm (5 of 7)2009/9/11 NSH 01:35:44